• 한국환경보건학회지
• /
• 제39권6호
• /
• pp.522-531
• /
• 2013

Objectives: A field survey was conducted in a hog-raising industry in order to help develop personal protective equipment for workers which would secure the safety and the health of these workers. The attempt by this study will help enhance safety in the livestock industry and contribute to the advancement of the industry. Method: The study first selected a total of 111 workers from the hog-raising industry as research participants and designed a survey with questions on general characteristics, indoor and outdoor working environments, how the workers would in practice wear or purchase the working clothes, what needs to be improved in these new working clothes, how much the workers would be likely to accept the working clothes and protective equipment, and lastly, conditions of the communicable disease control overgarment. The collected data underwent frequency analysis and cross analysis with SPSS 21.0. Result: The research targets' average age was 50 years. Work efficiency by environmental factor was normal, but all age groups had experience of accidents (79.3%). Major wounded parts were under elbow and under knee. Protective equipment most commonly worn was helmet (83.4%), gloves (98.2%) and boots (99.1%), and satisfaction with them was normal at 3.41. Working clothing most commonly worn was old clothing (31.8%) and everyday wear (17.6%) and satisfaction with it was low. Considering the improvement of working clothing, they required attached pouches, elasticity and deodorization. The acceptability of improved working clothing was high at 69.2%. Conclusion: After problems have been addressed in relevant future research, what has been learned from the concerned study will be referred to as a useful basic reference when the relevant field works to develop high-quality working clothing and protective equipment for workers in the hog-raising industry.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1281-1286
• /
• 2010

발전소를 비롯한 각종 플랜트 설비는 많은 기계설비들로 구성되어 고장이 발생할 경우, 고장이 발생된 설비와 시간을 명확하게 파악하기가 쉽지 않다, 또한 고장발생시 정비비용 증가와 함께 설비의 이용률이 감소하여 막대한 경제적 손실이 발생한다. 발전소는 각종 계측센서를 설치하여 설비를 상시 감시하고 있으며, 경고발생 이전 지시치의 변화를 관찰하여 설비의 이상상태를 자동 감지하는 신호기반 고장 조기경보 시스템도 설치된 발전소도 있다. 그러나 고장경보 시스템은 이상신호 발생을 인지하여 설비의 이상상태 여부는 알려주지만 고장원인과 중요도에 대한 정보는 제공하지 않는다. 본 연구에서는 고장분석 기능을 가지고 있는 RCM(Reliability Centered Maintenance) 분석 시스템과 고장경보시스템을 연계하여 설비의 이상신호로부터 고장원인과 정비방법에 대한 정보를 제공하는 고장예측시스템을 개발하고자 한다.

• 한국전자파학회논문지
• /
• 제29권2호
• /
• pp.118-127
• /
• 2018

본 논문에서는 합성개구레이다(Synthetic Aperture Radar: SAR) 장비의 성능 분석을 위하여 레이다 표적모의장치를 설계, 제작한 결과를 선보인다. 먼저 표적모의장치의 기능과 성능에 대해 설명하고, SAR 장비와 연동하기 위한 표적 시나리오 생성방법에 대해 설명하였다. 또한 제작된 표적모의장치를 이용하여 SAR 장비의 시간지연 값을 간단하고 정확하게 측정하고 보상하는 방법을 개발하였다. 시간지연이 보상된 SAR 장비와 표적모의장치를 이용하여 SAR 영상에서 점표적을 획득하고, IRF(Impulse Response Function) 분석을 통해 성능을 분석하였다. 그 결과, 방위방향 IRF의 PSLR(Peak to Side Lobe Ratio)은 -13.25 dB, 해상도는 0.49 m로 이론값과 매우 유사한 값을 보였다.

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.7-14
• /
• 2003

For GIS to land and sea in Korea, GIS on land was almost completed with big cities by NGIS(National Geographic Information System) business. However, MGIS(Marine Geographic Information System) being constructed by the National Oceanographic Research Institute is still constructing geography information and definition of attribute information and real condition. We are being studied on research to get maximized the ripple effect linking GPS and Navigation techniques on GIS. GPS in accuracy is divided into navigation and precise surveying equipment. Now, GPS technology has been developed very much and low price GPS equipments are introducing. But expense on GPS equipment is high yet. Therefore, GPS equipment for navigation is used on cheap GPS equipment in a car or ship. In this paper, the author used algorithm to convert ellipsoid coordinate between WGS84 and Bessel ellipsoid and to analyze map projection between BESSEL ellipsoid and UTM plane coordinate system. And the author developed ship navigation system with cheap GPS equipment using algorithm of ellipsoid conversion and map projection. The author proposed the necessity on constructing MGIS to manage many ships.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.15-26
• /
• 2009

This research has so far found out problems including the second damage of extinguishant and the short time of emission when using the existing dry chemical extinguisher and gas type extinguisher, and impossibility of constant extinguishing due to the inability of recharge at the field. To solve such problems, a mobile water mist system was developed and used. However, it is judged that more improved mobile water mist system is necessary because the force of the fire changed diversely and remote villages in mountains or islands where the force of fire extinguishing is short or delayed, require high capacity of fire extinguishing. Therefore a new equipment was developed and tested focusing on the improvement of extinguishing capacity and the performance of extinguishing was found out to be improved, compared to the existing mobile water mist system. It also showed a superior extinguishing capacity to dry chemical extinguisher or gas type extinguisher. Afterward an additional research is required of simplification of equipment, price cutting and the development of additive to enable high performance even with just small extinguishant.

• 한국조리학회지
• /
• 제14권1호
• /
• pp.94-106
• /
• 2008

This study is conducted to explore the cooks' recognition of culinary environment of school feeding among the cooks working for elementary schools, middle schools, and high schools in the Ulsan district. A total of 200 samples were distributed and 185 samples were collected; among them, 182 valid samples were selected for research. Answers were processed by SPSS 12.0. after data coding. As for factor analysis of culinary environment, three factors were extracted, which are general environment, human environment, and facilities equipment environment. It was found that general environment included ventilation(31.5%), temperature (29.0%), humidity(22.1%) in the order of importance; human environment covered cooperation among cooks (28.1%), the number of cooks(25.7%), and professionalism of cooks in the order of importance; facility equipment environment contained the design and layout of facilities and equipment(29.3%), various safety facilities, and safety device(23.3%) in the order of importance. However, a measure for improving work environment, number of cooks, deterioration of equipment, etc. should be considered.

• 대한의용생체공학회:의공학회지
• /
• 제40권6호
• /
• pp.230-234
• /
• 2019

Medical laser equipment using optical energy is used to surgery and treat diseases by destroying and removing tissue. Domestic laser equipment has been used steadily in the skin and cosmetics sectors and has been changed to radiate high-power energy in a wide range to shorten patient treatment time. However, side effects such as burns and damage of normal tissues occurred. To solve this problem, techniques for detecting lesions using an imaging device and selectively radiating the laser have been developed. In this study, we proposed an evaluation method to evaluate the safety and performance of target detection accuracy, laser irradiation accuracy and motion protection device technology derived from product analysis and investigation. Finally, the validity of the evaluation method was evaluated by evaluating the imaging device based laser equipment as the proposed evaluation method.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.670-676
• /
• 2019

We study substrate support structures and materials to improve uptime and shorten preventive maintenance cycles for chemical vapor deposition equipment. In order to improve the rolling of the substrate support, the bushing device adopts a ball transfer method in which a large ball and a small ball are mixed. When the main transfer ball of the bushing part of the substrate support contacts the substrate support, the small ball also rotates simultaneously with the rotation of the main ball, minimizing the resistance that can be generated during the vertical movement of the substrate support. As a result of the improvement, the glass substrate breakage rate is reduced by more than 90 ~ 95 %, and the equipment preventive maintenance and board support replacement cycles are extended four times or more, from once a month to more than four months, and the equipment uptime is at least 15 % improved. This study proposes an optimization method for substrate support structure and material improvement of chemical vapor deposition equipment.

• 한국추진공학회지
• /
• 제24권4호
• /
• pp.48-54
• /
• 2020

미국, 유럽, 일본, 중국 등 우주 선진국에서 효율성 및 저비용을 목표로 차세대 상업용 발사체를 위한 연구가 활발하게 진행되고 있다. 본 논문은 지상운용시스템을 포함한 발사체 에비오닉스 시스템에 대한 최근 기술동향들을 조사하고 소개하는 것이다. 탑재장치의 경우 개발 기간을 단축하고 비용을 절감하기 위해 기능별로 장치를 표준화하고 시스템 요구조건 변경에 유연하게 대응하도록 모듈화를 진행한다. 또한 모든 장치간 인터페이스에 통신망을 적용하고 강력한 자가진단 기능을 탑재장치에 포함시킴으로써 지상시스템과의 인터페이스에 자동화·단순화를 실현하여 효율적인 발사체계시스템을 구축하고 있음을 확인한다.

• 대한토목학회논문집
• /
• 제35권2호
• /
• pp.501-514
• /
• 2015

토공작업은 모든 종류의 토목공사에 기본이 되는 공종으로 공기, 공사비와 생산성에 영향을 미치는 요소이다. 토공은 그룹으로 형성된 다수의 건설장비들이 필요한 기계화 작업이며 건설장비로 인하여 많은 연료를 소비하는 작업이다. 그러나 일반적으로 토공작업은 건설장비 운전자의 경험과 직관에 의하여 수행되기 때문에 낮은 생산성, 높은 연료사용량 및 탄소를 많이 배출시킬 수 있는 문제점을 갖고 있다. 최근 연구에 의하면 이러한 문제점의 해결책의 하나로 건설장비 플릿관리 시스템이 제안되고 있다. 건설장비 플릿관리 시스템은 효과적인 토공계획, 최적의 건설장비 할당, 효율적인 건설장비 운영, 빠른 정보교환 등과 같은 기능을 수행한다. 본 연구에서는 건설장비 플릿관리 시스템 구축시 필요한 주요 방법론을 제시하는 것을 목적으로 하고 있다. 토공작업을 위한 3D 솔리드 파라메트릭 모델 형성, 옥트리를 이용한 토량배분, 건설장비 플릿구성 및 운영 방법론을 제시하였다. 건설장비 플릿관리 시스템의 효용성을 건설장비 가동률, 연료사용량, 이산화탄소 배출량 측면에서 검증해 보기 위하여 시뮬레이션을 실시하였다.