• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.746-752
• /
• 2005

In this study, the effect of reaction parameters including reaction temperature, time, and pressure on sludge degradation and conversion to intermediates such as organic acids were investigated at low critical wet air oxidation(LC-WAO) conditions. Degradation pathways and a modified kinetic model in LC-WAO were proposed and the kinetics model predictions were compared with experimental data under various conditions. Results in the batch experiments showed that reaction temperature directly affected the thermal hydrolysis reaction rather than oxidation reaction. The efficiencies of sludge degradation and organic acid formation increased with the increase of the reaction temperature and time. The removal of SS at $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 10 min of reaction time were 52.6%, 68.3%, 72.6%, and 74.4%, respectively, indicating that most organic suspended solids were liquified at early stage of reaction. At $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 40 min of reaction time, the amounts of organic acids formed from 1 g of sludge were 93.5 mg/g SS, 116.4 mg/g SS, 113.6 mg/g SS, and 123.8 mg/g SS, respectively, and the amounts of acetic acid from 1 g of sludge were 24.5 mg/g SS, 65.5 mg/g SS, 88.1 mg/g SS, and 121.5 mg/g SS, respectively. This suggested that the formation of sludge to organic acids as well as the conversion of organic acids to acetic acid increased with reaction temperature. Based on the experimental results, a modified kinetic model was suggested for the liquefaction reaction of sludge and the formation of organic acids. The kinetic model predicted an increase in kinetic parameters $k_1$ (liquefaction of organic compounds), $k_2$ (formation of organic acids to intermediate), $k_3$ (final degradation of intermediate), and $k_4$ (final degradation of organic acids) with reaction temperature. This indicated that the liquefaction of organic solid materials and the formation of organic acids increase according to reaction temperature. The calculated activation energy for reaction kinetic constants were 20.7 kJ/mol, 12.3 kJ/mol, 28.4 kJ/mol, and 54.4 kJ/mol, respectively, leading to a conclusion that not thermal hydrolysis but oxidation reaction is the rate-limiting step.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.166-172
• /
• 2002

The top shell, Omphalius pfeifferi capenteri meat vacuum-packed in can (diameter$\times$height, 74.1mm$\times$50.7mm) were heated at 115$^{\circ}C$ up to $F_0$ values of 5 min, 10 min, 15 min and 20 min, and the changes in food components were studied. After 14 days storage at 37$^{\circ}C$ and 55$^{\circ}C$, no growth of microorganism and panelling were recognized from the canned meats which were sterlized at 115$^{\circ}C$ with $F_0$ value of S min and over. In the case of proximate composition of the canned meats, the moisture content decreased with the increase of $F_0$ value, while crude protein increased. The increase of volatile basic nitrogen content, pH and degree of browning and the decrease of mineral, total amino acid, free amino acid, trimethylamine oxide, total creatinine contents and yields were observed during thermal processing, In sensory evaluation on color, texture and taste in the canned meats, no significant difference was observed among a boiled sample and the canned meats heated at re value of 10 min and below. But, in the canned meats heated at $F_0$ value of over 15 min, its sensory scores decreased with the increase of $F_0$ value. From these results, the reasonable $F_0$ value for preparation of the heat-treated top shell meats was in the range of 5$\~$10 min.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.608-614
• /
• 1998

In order to establish the scientific foundations for the production of Korean traditional kanjang (soy sauce) in a semi-pilot scale, meju preparation and kanjang mashing methods were investigated. Two types of meju, one that was prepared by conventional method (CM-meju) and the other that prepared by modified conventional method (MCM-meju), were made and compared their characteristics. The former made of cooked and crushed soybean with a brick shape was fermented at $15{\sim}20^{\circ}C\;and\;40{\sim}50%$ relative humidity (RH) for 30 days in koji room and the latter was fermented at $25{\sim}30^{\circ}C\;and\;80{\sim}90%$ RH seemingly being optimum for the growth of meju-organisms for the same period. The quality of MCM-meju as a raw material for the kanjang preparation was considered to be superior to that of CM-meju as the higher soluble nitrogen and total free amino acids content, the major factor for the evaluation of the quality of meju, were found in the former although the higher total nitrogen content and lower % weight loss were observed in the latter during meju preparation process. The quality of MCM-kanjang with higher total nitrogen, free amino acids, free sugars and the lower residual nitrogen content in cake after separation of kanjang was also found to be superior to that of CM-kanjang in sensory evaluation results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1741-1749
• /
• 2015

The purpose of this study was to investigate parents' perception and satisfaction of school food materials and supplier performance in Mokpo. To achieve these research objectives, a questionnaire was distributed to parents at 66 schools, and a total of 589 were used in the final analysis. The results of this study were as follows. First, satisfaction of school foodservice, showed the following scores: overall was 3.75, quality of food materials was 3.84, reliability of food suppliers was 3.80, education was 3.53, and information was 3.50. Second, 38.5% of parents participated in receiving school materials. Exactly 80.6% of parents showed intentions to participate. The most difficult thing for receiving materials was comparing quality of food materials (46.3%). Third, the most important factor cited for school food supplier was quality (62.3%) and sanitation and safety (24.1%). Forth, most parents were positive about the possibility of replacing foods used at school with environment friendly products. Local foods were cited for use in school foodservice (92.2%). The reasons were good quality (39.9%) and contribution to the local community (28.5%). In conclusion, parent's perception of school foodservice should increase to improve food material quality of school foodservice. Institutions for certifying are needed to offer high quality food materials at school foodservice and improved communication and education tool between the school and parents.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.21-34
• /
• 2015

In this study, a reference model is constructed that provides architects or designers with sufficient information on the intelligent service facility that is essential for U-City space configuration, and for the support of enhanced design, as well as for planning activities. At the core of the reference model is comprehensive information about the intelligent service facility that plans the content of services, and the latest related information that is regularly updated. A plan is presented to take advantage of the database of list information systems in the Public Procurement Service that handles intelligent service facilities. We suggest a number of improvements by analyzing the current status of, and issues with, the goods information in the Public Procurement Service, and by conducting a simulation for the proper placement of CCTV. As the design of U-City plan has evolved from IT technology-based to smart space-based, reviews of limitations such as the lack of standards, information about the installation, and the placement of the intelligent service facility that provides U-service have been carried out. Due to the absence of relevant legislation and guidelines, however, planning activities, such as the appropriate placement of the intelligent service facility are difficult when considering efficient service provision. In addition, with the lack of information about IT technology and intelligent service facilities that can be provided to U-City planners and designers, there are a number of difficulties when establishing an optimal plan with respect to service level and budget. To solve these problems, this study presents a plan in conjunction with the goods information from the Public Procurement Service. The Public Procurement Service has already built an industry-related database of around 260,000 cases, which has been continually updated. It can be a very useful source of information about the intelligent service facility, the ever-changing U-City industry's core, and the relevant technologies. However, since providing this information is insufficient in the application process and, due to the constraints in the information disclosure process, there have been some issues in its application. Therefore, this study, by presenting an improvement plan for the linkage and application of the goods information in the Public Procurement Service, has significance for the provision of the basic framework for future U-City enhancement plans, and multi-departments' common utilization of the goods information in the Public Procurement Service.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.481-508
• /
• 2013

The purpose of this study is to research the specific ways of successful localization by analyzing the success and failures case for localization through the theoretical background and the strategic models of localization. The strategic models of localization are divided by management aspects such as the localization of production and sourcing, the localization of human resources, the localization of marketing, the localization of R&D, harmonious relationship with the local community and authority transfer between headquarters and local subsidiaries. And the specific measures of the successful localization are proposed within the framework of the strategic models by comparing and analyzing the success and failures case for localization of individual companies operating in Indonesia. The results indicate that there are successful companies which develop a suitable products for the local climate and failed automobile company which is weak for assembly of complete vehicle in terms of localization of production and sourcing. In case of localization of human resources, most companies recognize the importance of this part and endeavor to secure superior human resource through a related education. It is found that most of the companies perform R & D in their native country. In part of a harmonious relationship with the local community, Korean companies should contribute to the community and be friendly with local residents and make a good image of the company focusing on the cultural environment. In aspect of authority transfer between headquarters and local subsidiaries, there is a tendency to be determined by the head office rather than the joint participation. In the future, in order for Korean enterprise to be successful one in Indonesia market, a highly interdependent and complex forms between headquarters and local subsidiaries shall be performed and an active exchange of information and the selection of best talent regardless of nationality shall be promoted.

• Journal of the Korean earth science society
• /
• v.22 no.4
• /
• pp.327-338
• /
• 2001

In this study, the short-term variability of methane concentrations were investigated over 24-hr scale. The data obtained form the Moo-Ahn (MAN) station located in the western coastal area of Korea were analyzed from various respects to describe its distribution characteristics over short term scale. The MAN data were compared with those obtained from the two major background observatory sites: Point Barrow (Alaska) and Mauna Loa (Hawaii). The mean concentration of methane for the whole study period, when computed using the daily mean values, was found to be 1898${\pm}$85.3ppb (N=812). The mean values for the two comparable sites were observed to be 1832${\pm}$29.6ppb (N=823) for Point Barrow and 1745${\pm}$14.8ppb (N=818) for Mauna Loa. According to the analysis of frequency distribution. the mode value for the MAN area is found to be 1900ppb, but the mean concentration for Point Barrow and Mauna Loa are shown to have relatively low values of 1850 and 1750ppb, respectively. When examined over diurnal scale, the CH$_4$data for the MAN area exhibit a rather consistent trend; CH$_4$level is low during the daytime (after 6:00 A.M) and rises during the nighttime. The findings of the generally enhanced methane concentration in the MAN station may be explained form various respects. One of the most important reasons is that the MAN area is under the influence of various source processes relative to all the other stations under consideration. The short-term distribution patterns for the MAN station are hence characterized not only by the high methane concentration but also by the high oscillation in its CH$_4$concentration level.

• Journal of the Korean earth science society
• /
• v.24 no.3
• /
• pp.205-215
• /
• 2003

A precise and dense Bouguer anomaly is one of the most important data to improve the knowledge of our environment in the aspect of geophysics and physical geodesy. Besides the precise absolute gravity station net, we should consider two parts; one is to improve the precision in gravity measurement and correction of it, and the other is the density of measurement both in number and distribution. For the precise positioning, we have tested how we could use the GPS properly in gravity measurement, and deduced that the GPS measurement for 5 minutes would be effective when we used DGPS with two geodetic GPS receivers and the baseline was shorter than 40km. In this case we should use a precise geoid model such as PNU95. By applying this method, we are able to reduce the cost, time, and number of surveyors, furthermore we also get the benefit of improving in quality. Two kind of computer programs were developed to correct crossover errors and to calculate terrain effects more precisely. The repeated measurements on the same stations in gravity surveying are helpful not only to correct the drifts of spring but also to approach the results statistically by applying network adjustment. So we can find out the blunders of various causes easily and also able to estimate the quality of the measurements. The recent developments in computer technology, digital elevation data, and precise positioning also stimulate us to improve the Bouguer anomaly by more precise terrain correction. The gravity data of various sources, such as land gravity data (by Choi, NGI, etc.), marine gravity data (by NORI), Bouguer anomaly map of North Korea, Japanese gravity data, altimetry satellite data, and EGM96 geopotential model, were collected and processed to get a precise and dense Bouguer anomaly in and around the Korean Peninsula.

• Journal of Korean Academy of Nursing Administration
• /
• v.3 no.2
• /
• pp.61-80
• /
• 1997

The purpose of this study is to measure the direct and indirect nursing care hours with establishment of nurse substations and compare the experimental nursing units with the existing nursing units For this study, two experimental nursing units: (1) a medical nursing unit and (2) a surgical nursing unit with a nurse substation were selected. And two control nursing units : (1) a medical nursing unit and (2) a surgical nursing unit without a nurse substation were selected. After a three-month experimental operation from June 1 to August 31,1996, research data were collected for three days from September 2 to 4, 1996. We investigated the effects of the direct & indirect nursing care hours with establishment of the nurse substations (improved nursing environment) without adding the staff nurses. The effect of establishment of the nurse sub-station was measured for the differences direct & indirect nursing care hours between experimental and control nursing units. An investigator measured the time for a staff nurse to practice each nursing activity and recorded it every minute. Percentage, average, standard deviation, t-test and ANOVA were used for data analysis. The results are as follows: 1. There was no significant difference between the experimental and control nursing units in staffs' working hours during their shift. 2. There were significant diffferences between the experimental and control nursing units in dierct nursing care hours (t=0.0288, p=0.0001) and indirect nursing care hours (t=0.3886, p=0.0103) per patient. 3. There was significant difference between the experimental and control nursing units in direct nursing care hours done by nurses(t=0.0012, p=0.0111) and aids(t=0.3011, p=0.0027). There was significant difference between the experimental and control nursing units in indirect nursing care hours done by head-nurses(t=0.0051, p=0.0253), nurses(t=0.0071, p=0.0024) and aids (t=0.3227, p=0.0351). There was significant difference between the experimental and control nursing units in indirect nursing care hours done by nurses(t=0.0005, p=0.0015) and aids(t=0.2400, p=0.0013) per patient. There was significant difference between the experimental and control nursing units in indirect nursing care hours done by head-nurses(t=0.0005, p=0.0379) and nurses (t=0.0035, p=0.0198) per patient. 4. Thre were significant differences between the experimental and control nursing units in direct nursing care hours (t=0.1134, p=0.0010) and indirect nursing care hours (t=0.7106, p=0.0008) per staff during the day shift. There were significant differences between the experimental and control nursing units in direct nunsing care hours during the day(t=0.0723, p=0.0003) and evening shift (t=0.0004, p=0.0285) per patient, and indirect nursing care hours during the day shift(t=0.5565, p=0.0036) per patient. 5. There were differences between the experiemental and control nursing units in dircet nursing activities including measurement and observation, medication, communication, teratment, hygiene, and nutrition, and in indirect nursing activities including confirmantion, communication, record, computer work, management of goods. But it was not statistically proven. 6. There was difference between the experimental and control nursing units in unmet-need nursing care hours per patient, but not statistically proven.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.37-47
• /
• 2017

In this study, a series of full-scale field tests on prebored and precast steel pipe piles and the corresponding numerical analysis have been conducted in order to study the characteristics of pile load-settlement relations and shear stress transfer at the pile-soil interface. Dynamic pile load tests (EOID and restrike) have been performed on the piles and the estimated design pile loads from EOID and restrike tests were analysed. Class-A type numerical analyses conducted prior to the pile loading tests were 56~105%, 65~121% and 38~142% respectively of those obtained from static load tests. In addition, design loads estimated from the restrike tests indicate increases of 12~60% compared to those estimated in the EOID tests. The EOID tests show large end bearing capacity while the restrike tests demonstrate increased skin friction. When impact energy is insufficient during the restrike tests, the end bearing capacity may be underestimated. It has been found that total pile capacity would be reasonably estimated if skin friction from the restrike tests and end bearing capacity from the EOID are combined. The load-settlement relation measured from the static pile load tests and estimated from the numerical modelling is in general agreement until yielding occurs, after which results from the numerical analyses substantially deviated away from those obtained from the static load tests. The measured pile behaviour from the static load tests shows somewhat similar behaviour of perfectly-elastic plastic materials after yielding with a small increase in the pile load, while the numerical analyses demonstrates a gradual increase in the pile load associated with strain hardening approaching ultimate pile load. It has been discussed that the load-settlement relation mainly depends upon the stiffness of the ground, whilst the shear transfer mechanism depends on shear strength parameters.