• 제목/요약/키워드: Requirements specification

검색결과 467건 처리시간 0.024초

태풍 시 플로팅도크 안벽 계류 로프 설계 (Design of quay mooring rope of Floating Dock against Typoon)

  • 김호경
    • 한국산학기술학회논문지
    • /
    • 제21권9호
    • /
    • pp.569-574
    • /
    • 2020
  • 플로팅도크는 육상에서 건조된 선박을 해상으로 진수하기 위한 주요한 설비이다. 2000년대 초반 국내에서 육상에서 건조한 선박을 플로팅도크를 이용하여 진수할 수 있는 육상 건조 공법이 개발 적용됨에 따라 드라이도크에 대한 투자 없이 신조 사업에 참여할 수 있는 기회가 대폭 확대되었다. 본 논문에서는 이러한 육상 건조 공법을 활용하여 드라이도크를 보유하지 않은 중소업체에서 건조한 선박을 진수시킬 수 있는 플로팅도크의 안전한 계류를 위한 기본 계산을 수행하고 이를 기반으로 계류 시스템을 설계하였다. 본 논문은 적재 중량 4,000 Ton급 플로팅도크를 대상으로 하여, 플로팅도크가 설치되어 운영될 대불부두의 환경 요건 중 가장 심각한 상황인 태풍 상황을 고려하여 수행되었다. 설계 하중의 계산은 국제적으로 통용되는 기준을 따라 풍하중, 조류하중, 파에 의한 하중을 고려하였다. 대불 부두의 기존 계류 설비를 활용하여 플로팅 도크의 계류 로프 초기 배치를 수행한 후 주어진 하중에 따라 계류 로프별로 최소 파단 강도를 계산하였다. 계산 결과를 바탕으로 최소 파단 강도를 줄일 수 있도록 계류 배치를 일부 수정하였으며 최종 계류 라인의 규격을 선정하였다.

NEI 방법론을 적용한 중수로 주제어실의 화재안전정지분석에 관한 연구 (Study of Post-Fire Safe-Shutdown Analysis of a CANDU Main Control Room based on NEI 00-01 Methodology)

  • 김인환;임혁순;배연경
    • 한국화재소방학회논문지
    • /
    • 제30권4호
    • /
    • pp.20-26
    • /
    • 2016
  • 원자력발전소의 화재방호 목적은 예방, 화재의 진압 및 영향을 완화하는 데 있으며, 화재가 발생하면 원자로를 안전하게 정지하여 유지하고 환경으로 방사성물질의 유출을 최소화하는 것이다. 미국의 원자력규제위원회는 10CFR50.48과 10CFR50 APP.R을 발행한 이래 지난 20여년간 화재방호와 관련하여 많은 일반 통신문(Generic Communications)을 발행하였으며, 미국원전 발전사업자(Nuclear Energy Institute)에서는 회로고장 해결을 위한 다중오동작과 관련된 결정론적 방법 등을 사용과 연계하여 위험도정보를 활용한 화재 안전정지분석 방법론을 개발하였다. 본 논문에서는 중수로원전의 주제어실 화재시 화재안전정지분석 방법론을 적용하여 안전정지용 한 계열의 안전관련 계통 및 기기가 손상되어도 원자로의 사고 후 안전정지를 달성하고 유지함을 확인하였다.

도로 포장의 초기상태에 따른 공사비 차등지급규정의 시험적용 (Application of Pay Adjustment Regulation for Highway Flexible Pavements)

  • 서영국
    • 한국도로학회논문집
    • /
    • 제11권3호
    • /
    • pp.111-120
    • /
    • 2009
  • 본 논문에서는 도로포장의 성능개선을 유도하기 위한 제도적 수단인 공사비 차등지급규정(지불규정)을 제시하고 이를 고속도로 아스팔트 포장 공사에 처음으로 적용한 결과를 다루고 있다. 지불규정을 적용하기 위한 단위구간(lot)은 덧씌우기 포장의 일평균 시공연장으로 정의하였다. 단위구간은 다시 포장의 초기상태 평가를 위한 최소 단위인 세부단위구간(sublot)으로 나누었으며, 세부단위구간에서 측정한 품질항목의 평균과 표준편차를 이용하여 단위구간을 대표하는 품질항목별 지불계수(pay factor)를 산정하였다. 마지막으로, 각각의 품질항목이 포장의 중장기 공용성에 미치는 상대적 영향을 고려하여 합성지불계수를 결정하였다. 본 연구에서 제시한 지불규정은 2008년에 한국도로공사 6개 지역본부(충청, 호남, 경북, 경남, 경인, 강원)에서 시행된 아스팔트 덧씌우기 포장공사에 적용하였으며, 이 과정에서 제기된 고려사항 및 문제점을 정리하였다. 결론적으로, 품질항목에 대한 평가결과가 품질관리한계를 만족하는 경우에는 기존 공사비 대비 최대 50% 가까이 인센티브 지급이 가능함을 알 수 있었다. 반면에, 다짐도와 같은 주요 성능관련 품질이 낮을 경우 기존 공사비 대비 최대 10% 가까이 공사비 감액도 있을 수 있음을 확인하였다.

  • PDF

비순서화된 스트림 처리를 위한 적응적 버퍼 제어 기법 (Adaptive Buffer Control over Disordered Streams)

  • 김현규;김철기;이충호;김명호
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제34권5호
    • /
    • pp.379-388
    • /
    • 2007
  • 비순서화된 스트림은 윈도우 기반의 질의를 처리할 때 부정확하거나 지연된 결과를 유발할 수 있다. 기존의 방식에서는 일반적으로 버퍼를 이용하여 비순서화된 스트림을 정렬하며, 버퍼의 크기를 추정하기 위해 네트워크 지연의 최대값에 기반한 방식을 이용한다. 그러나 이러한 방식은 버퍼의 크기를 불필요하게 큰 값으로 추정할 수 있으며, 지연된 질의 결과를 발생시킬 수 있다. 본 논문에서는 네트워크 지연의 변화에 따라 적응적으로 버퍼의 크기를 추정하기 위한 확률론적인 접근 방법을 제안한다 제안하는 방법에서는 튜플의 생성이 포아송 분포를 따르며 네트워크 지연은 정규 분포를 따른다고 가정한다. 그리고 이러한 가정을 바탕으로 추정식을 유도한다. 추정식은 튜플의 손실율을 입력인자로 요구하며, 이는 실시간에 튜플의 손실에 있어서 허용 가능한 백분율을 나타낸다. 사용자는 손실율을 질의문에서 정의함으로써, 응용의 요구에 따라 질의 결과의 정확성이나 처리속도 중 원하는 특성에 중점을 둘 수 있다. 본 논문의 실험 결과는 제안한 추정식이 기존의 네트워크 지연의 최대값에 기반한 추정식에 비해 적응성이 우수함을 보인다.

초소형 광 픽업의 정적 오차 신호 검출 (Evaluation of Static Error Signal for Super Slim Optical Pick-up)

  • 강성묵;조은형;손진승;김완진;박노철;박영필
    • 정보저장시스템학회논문집
    • /
    • 제1권2호
    • /
    • pp.115-120
    • /
    • 2005
  • As a popularity of a portable digital device such as a cellular phone, a digital camera and a MP3 player is spreading, the demand of the mobile storage device increases rapidly. A bluray technology using 405nm laser diode and objective lens having high NA(Numerical Aperture), 0.85, satisfies a miniaturization and a high capacity which are the requirements of the portable device. To develop SFFOP(small form factor optical pickup), it is prerequisite to minimize the number of optical components and establish evaluation and assembly method of micro optical pickup system as well as mass production method of micro optical component. To minimize optical elements of optical pickup, there have been many researches to use P-HOE(Polarized Holographic Optical Element) due to its extremely small size and versatile function. However, P-HOE is handled and assembled very accurately in SFFOP. In this paper, static error signal detection method is developed for an alignment of P-HOE in SFFOP. Using developed static error signal detection method, P-HOE can be aligned very accurately with real time result of static error signals of pickup such as FES(focusing error signal) and TES(Tracking Error Signal). The developed static error signal detection method is verified by the evaluation of commercialized DVD Pickup. And finally. developed static error signal detection method is applied for the assembly of P-HOE in SFFOP system satisfies specification of BD(Blu-ray Disk).

  • PDF

Comparative analysis of physicochemical properties of root perforation sealer materials

  • Orcati Dorileo, Maura Cristiane Goncales;Pedro, Fabio Luis Miranda;Bandeca, Matheus Coelho;Guedes, Orlando Aguirre;Villa, Ricardo Dalla;Borges, Alvaro Henrique
    • Restorative Dentistry and Endodontics
    • /
    • 제39권3호
    • /
    • pp.201-209
    • /
    • 2014
  • Objectives: This study evaluated the solubility, dimensional alteration, pH, electrical conductivity, and radiopacity of root perforation sealer materials. Materials and Methods: For the pH test, the samples were immersed in distilled water for different periods of time. Then, the samples were retained in plastic recipients, and the electrical conductivity of the solution was measured. The solubility, dimensional alteration, and radiopacity properties were evaluated according to Specification No. 57 of the American National Standards Institute/American Dental Association (ANSI/ADA). Statistical analyses were carried out using analysis of variance (ANOVA) and Tukey's test at a significance level of 5%. When the sample distribution was not normal, a nonparametric ANOVA was performed with a Kruskal-Wallis test (${\alpha}$ = 0.05). Results: The results showed that white structural Portland cement (PC) had the highest solubility, while mineral trioxide aggregate (MTA)-based cements, ProRoot MTA (Dentsply-Tulsa Dental) and MTA BIO ($\hat{A}$ngelus Ind. Prod.), had the lowest values. MTA BIO showed the lowest dimensional alteration values and white PC presented the highest values. No differences among the tested materials were observed in the the pH and electrical conductivity analyses. Only the MTA-based cements met the ANSI/ADA recommendations regarding radiopacity, overcoming the three steps of the aluminum step wedge. Conclusions: On the basis of these results, we concluded that the values of solubility and dimensional alteration of the materials were in accordance with the ANSI/ADA specifications. PCs did not fulfill the ANSI/ADA requirements regarding radiopacity. No differences were observed among the materials with respect to the pH and electrical conductivity analyses.

CBD의 부분 매칭 문제 해결을 위한 커넥터 설계 기법 (A Method to Design Connectors to Resolve Partial Matching Problems in CBD)

  • 민현기;김수동
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제32권12호
    • /
    • pp.1205-1216
    • /
    • 2005
  • 효율적 재사용 기술인 컴포넌트 기반 개발(Component-based Development, CBD)이 보급화되고 있다. 특히 Commercial-Off-The-Shelf (COTS) 컴포넌트는 컴포넌트 내부의 구조 보다 컴포넌트 간의 연결 구조가 중요하다. 컴포넌트 사용자가 요구하는 기능과 적절한 인터페이스를 제공하는 컴포넌트를 식별하여 재사용하는 일은 CBD에서 핵심 작업 중 하나이다 만약 식별된 후보 컴포넌트가 제한된 활용성과 기능을 제공한다면, 컴포넌트 사용자는 어플리케이션을 개발할 때 컴포넌트들을 재사용할 수 없다. 후보 컴포넌트와 사용자가 요구하는 사항과의 불일치를 해결하기 위해 스마트 커넥터가 필요하다. 그러나 기존 연구는 컴포넌트 불일치 해결을 위한 커넥터의 종류는 정의되어 있지만, 컴포넌트간의 부분 매칭을 식별하기 위한 방법과 절차가 부족하다. 본 논문에서는 컴포넌트의 부분 매칭 문제를 식별하기 위한 분류 기법을 제시한다. 이 분류 기법을 이용하여 부분 매칭을 해결하기 위한 스마트 커넥터의 종류를 식별하고, 커넥터를 설계하기 위한 기법을 제안한다. 따라서 부분 매칭 문제를 갖는 컴포넌트도 어플리케이션 개발시 사용될 수 있다.

Investigation of Key Factors to measure on-site Performance of a Construction firm

  • Lee, Young-Dai;Kim, Jung-Ki;Acharya, Nirmal Kumar
    • 한국건설관리학회논문집
    • /
    • 제8권6호
    • /
    • pp.246-262
    • /
    • 2007
  • The performance of projects has always been an area of interest in the construction industry. Roles of all construction supply chain partners are necessary; however the role of a contractor firm in the construction project is pivotal. So, this research intended to explore a Construction Firm's performance criteria which could measure the level of performance of that firm in an ongoing project. Data was collected from construction professionals working in three principal project participant organizations, namely Owner, Consultant and Contractor. A total of 113 nos. of performance measuring items were sorted from literature review and used to collect data. Statistical tools processed by SPSS program was employed to analyze the data. Out of total 113 items, only 65 nos. of variables were found to be acceptable to every population group of this study. Factor analysis revealed 12 key performance predicting factors (KPPF) with 53 predictive indicators. 12 KPPFS with index weight are: work progress and smoothening (9.3%), change order management and work accuracy (9.1%), business relationship building (8.1%), adequacy of construction work procedure (8.6%), quality performance (8.0%), health and site safety adequacy (8.8%), Innovative contractor (8.0%), adequacy of construction site information (6.8%), compliance with contract plan/specification requirements (8.9%), creditworthiness and financial capability (8.3%), intra-agency relationship and responsiveness (7.0%) and resource management (9.2%). These results could be useful to project management body to evaluate performance of its contractor firm on site as well as the contractor itself to assess own performance and its subcontractors on-site.

광대역 CDMA WLL 시스템을 위한 변조기 채널 카드 및 VLSI 칩 설계 및 구현 (Design and Implementation of Modulator Channel Card and VLSI Chip for a Wideband CDMA Wireless Local Loop System)

  • 이재호;강석봉;조경록
    • 한국통신학회논문지
    • /
    • 제24권10A호
    • /
    • pp.1571-1578
    • /
    • 1999
  • 본 논문은 Direct Sequence Code Division Multiple Access (DS-CDMA) Wireless Local Loop (WLL) 시스템의 Radio Transceiver Unit (RTU)를 위한 변조기 채널 카드와 변조기 VLSI 칩의 설계 및 구현에 대해서 서술했다. 변조기 채널 카드는 ASIC, FPGA 그리고 DSP를 이용하여 구현하였다. 구현된 변조기 ASIC칩은 ETRI가 제안한 Common Air Interface (CAI) 규격을 따랐고, 동작주파수는 32MHz, 회로의 크기는 40,000 게이트이다. 그리고 $0.6\mu\textrm{m}$ CMOS 공정으로 제작되었다. 본 변조기 ASIC 칩은 4개의 I,Q 채널을 처리할 수 있는 구조로 되어 있고 각 채널은 콘벌루션널 코딩, 블록 인터리빙, 스크램블링, 왈쉬 카버링, Pseudo Noise (PN) 확산 그리고 기저대역 필터링 기능 등을 포함한다. 변조기 채널 카드는 WLL 시스템 내 RTU의 서브 유니트의 하나이며 구현된 변조기 ASIC 및 채널 카드는 실제 WLL 시스템에 실장되어 그 성능 및 기능 요구사항을 만족함을 확인할 수 있었다.

  • PDF

준공측량도면을 이용한 수치지도 수정/갱신 (Update/Revision of Digital Map by Using the Drawing of Work Completion Surveying)

  • 김원대;이강원;박홍기
    • 대한공간정보학회지
    • /
    • 제8권1호
    • /
    • pp.85-95
    • /
    • 2000
  • 최근 활발한 수치지도의 제작과 함께 수치지도 수정/갱신의 필요성도 증대되어가고 있다. 수치지도를 수정/갱신하는 방법에는 사진측량, 지상측량, 인공위성의 활용 등 많은 방법이 이용되고 있으나, 작업의 과정에 많은 시간이 소요되고, 소규모 지역적인 부분의 갱신에는 경제적, 시간적인 문제로 적용하는데에 제한적인 요소들이 존재한다. 따라서, 본 연구에서는 공사의 준공시에 작성되는 준공측량도면을 이용하여 수치지도를 수정/갱신하는 방법을 제시하고 이에 대한 정확도를 분석하여, 경제적인 수치지도의 수정/갱신방법을 제시 하였다. 본 연구의 결과, 1/1,000 수치지도를 수정/갱신하기 위하여 1/1,200 준공측량도면을 이용한 결과, 국가 수치지도 제작 정확도에 준하는 수치지도의 수정/갱신이 가능하였다. 또한, 수치지도의 갱신을 위하여서는 전산화된 파일의 제공이 필요하며, 보다 정확한 준공측량도면의 작성을 위하여 지역기준점 개념의 도시보조 기준점의 도입이 적극적으로 검토되어야 할 것으로 조사되었다. 이를 뒷받침하기 위하여 준공단계에서 측량을 실시하여 준공측량도면을 작성할 수 있는 법률적인 지원이 있어야 할 것이다.

  • PDF