• The Journal of Korean Medicine
• /
• v.29 no.5
• /
• pp.104-110
• /
• 2008

Objectives : The purpose of this study is to develop the method of selecting representative pulse wave. Methods : The pulse waves were acquired at the right and the left Guan point(關部) with 1420 people who were apparently healthy. The shape agreement of right and left pulse wave and the floating-sinking ratio were compared with three cases, which were the pulse height based method, the pulse area based method, and the pulse time based method. Results : In the point of the shape accordance, the pulse time based method was the best, and the pulse area based method was the worst. In the point of the floating-sinking ratio, the pulse height based method was the worst, and the pulse time based method was the best. Conclusions : So, the pulse time based method was recommended for selecting the representative pulse wave. This study compared the selection methods of representative pulse using the physiological characteristics of pulse wave. Further studies are required, because the representative pulse wave is the main factor of determining the shape and the floating-sinking characteristic of the pulse wave.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.2
• /
• pp.131-139
• /
• 2002

Custom-tailored products always vary their sizes and shapes to satisfy the customers' tastes and requirements but they have to be fabricated as fast as possible when ordered. One way to solve this problem is to prepare several representative products in advance and each custom-tailored product is generated by machining the closest representative product. To realize this approach, it would be necessary to be able to group the products into several groups each of which has a representative product. Once the similar products are identified to be grouped, the representative shape can be generated such that all the products in the group can be made by machining the representative product. The custom-tailored products considered in this work have similar shapes but different sizes. Since these products have free surfaces, that are hard to be compared, their convex hulls are used for the grouping. Among all the products to be grouped, one product is chosen as a base shape. The shape and overall similarity values between the base shape and the remaining shapes are calculated as their convex hulls are rotated virtually. By calculating these similarity values at each rotation, the optimal alignment of the reference shape with respect to the base shape is determined. Overall similarity value at this optimal alignment is used as a measure for grouping. A prototype system based on the proposed methodology has been implemented and used to group the shoe-lasts for custom-tailored shoes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2020

The purpose of this study is to create a 3D avatar from 3D human body shape data using the CLO 3D virtual clothing program and to verify the feasibility of avatar production using the virtual clothing system for verifying size and shape. The research method was to select one virtual representative model that is the closest to the mean size of each body item for each age group. Using the 3D human body scan shape of a 40-69 years old male was applied to the CLO 3D virtual wearing system. Using the CLO 3D Avatar conversion menu, we verified the feasibility of creating a 3D avatar that reproduces the human body scan shape. In the dimension comparison between the 3D avatar and the fictitious representative model, the dimension difference was noticeable in height, circumference, and length. However, as a result, the converted 3D avatar showed less than a 5% difference in most human dimensions. In addition, since the body shape and posture were reproduced similarly, the utilization of the avatar was verified.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.36-43
• /
• 1998

The purpose of study is to propose numerical assessment methods of lateral deformation shape under lateral loads for regular high-rise buildings. The normalized 1st mode shape is used to assess lateral deformation shape. The assessment method are mass participation factor, representative value by RMS, the mean value, median of the nomalized 1st mode shape. These methods are able to know a fundamental lateral deformation shape of the building and effects of interactive systems numerically. Generally the characteristics of normalized 1st mode shape for various models coincide with numerical assessment results.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.104-108
• /
• 2009

Rapid urbanization resulted in expansion of urban area and increase of population bringing deepened housing shortage. Supply-oriented housing policy made apartment a representative residential space in Korea in spite of the short history of apartment. This study analyzed the shape and arrangement of main building by year and the microclimate in the complex depending on the number of floors. The purpose of this study was to present the basic data in developing apartment complex to solve problems like the stagnation of pollution source and the rise of temperature due to the declined ventilation in apartment complex, and the worsened urban heat island phenomenon due to the impeded flow of wind. This study rearranged the shape and arrangement of main building by year and the tendency of the number of floors by year in the process of change, by generalizing the process of change of apartment complex, a representative modern residential space through preliminary research. Based on it, 8 object lot by age was selected and simulated by using Envi-met. Simulation identified that the change of apartment complex takes place having a positive effect on microclimate in the apartment complex and the microclimate in the apartment complex is influenced a lot by the shape of complex. If in future apartment complex plan, a systematic legal criteria of design is made about the shape and arrangement of main building, it might have a positive effect on the improvement of microclimate in the apartment complex, a representative residential space in Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.159-166
• /
• 2004

Custom-tailored products are meant by the products having various sizes and shapes to meet the customer's different tastes or needs. Thus fabrication of custom-tailored products inherently involves inefficiency. To minimize this inefficiency, a new paradigm is proposed in this work. In this paradigm, different parts are grouped together according to their sizes and shapes. Then, representative shape of each group is derived and it will be used as the work-piece from which the parts in the group are machined. Once a new product is ordered, the optimal work-piece is selected through making similarity comparisons of new product and each representative shape. Then an effective NC tool-path is generated to machine only the different portions between the work-piece and the ordered product. The efficient machining conditions are also derived from this shape difference. By machining only the different portions between the work-piece and the ordered product, it saves time. Similarity comparison starts with the determination of the closest pose between two shapes in consideration. The closest pose is derived by comparing the ray distances while one shape is virtually rotated with respect to the other. Shape similarity value and overall similarity value calculated from ray distances are used for grouping. A prototype system based on the proposed methodology has been implemented and applied to the grouping and machining of the shoe lasts of various shapes and sizes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.70-73
• /
• 2003

Custom-tailored products are meant by the products having various sizes and shapes to meet the customer's different tastes or needs. Thus fabrication of custom-tailored products inherently involves inefficiency. To minimize this inefficiency, a new paradigm is proposed in this work. In this paradigm. different paris are grouped together according to their sizes and shapes. Then, representative shape of each group is derived and it will be used as the work-piece from which the parts in the group are machined. Once a new product is ordered, the optimal work-piece is selected through making similarity comparisons of new product and each representative shape. Then an effective NC tool-path is generated to machine only the different portions between the work-piece and the ordered product. The efficient machining conditions are also derived from this shape difference. By machining only the different portions between the work-piece and the ordered product, it saves time. Similarity comparison starts with the determination of the closest pose between two shapes in consideration. The closest pose is derived by comparing the ray distances while one shape is virtually rotated with respect to the other. Shape similarity value and overall similarity value calculated from ray distances are used for grouping. A prototype system based on the proposed methodology has been implemented and applied to the grouping and machining of the shoe lasts of various shapes and sizes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.440-458
• /
• 2019

Based on a 3D body data and pattern comparison analysis, this study developed a formal jacket pattern for men in their late 30s. In order to select the representative type of men in their late 30s, factor analysis and cluster analysis were conducted on data form 319 men, 35 to 39 years old using the anthropometric data from The 7th Size Korea (2015) as the representative body type. The surface of the body surface was developed using a 3D human shape of a male in his 30s in The 6th Size Korea (2010). Then the shape was changed to a flat pattern that confirmed the necessary elements for setting the shape and dimension. Cluster analysis revealed type B as the representative type because it showed the best shape characteristics for men in the late 30s. The drafting method of the final research pattern is as follows. Jacket length: stature/2.5cm, back length: stature/5+8.5cm (constant)], armhole depth: [stature/ 7-1.5cm (constant)], back width: [C/9+9.5cm (constant)]+1cm (ease), front width: [C/9+8.5cm (constant)]+1cm (ease), armscye depth: C/8, front waist darts: 1cm, front closure amount: 2cm.