• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.443-454
• /
• 2015

This study proposes a novel one-cycle control scheme with a plug-in repetitive controller for load compensator. The novelty of this scheme lies in the combination of high dynamics and the simplicity of a one-cycle controller and good steady-state harmonic suppression ability of the repetitive controller. In addition, the proposed scheme can reduce the effect of the harmonics in phase voltage for the existence of the repetitive controller. Finally, experimental results on a three-phase, four-wire, three-level load compensator are reported to validate the effectiveness of the proposed control scheme.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.850-856
• /
• 2018

In this paper, a controller based on repetitive learning control is designed to control an unmanned surface vessel with nonlinear characteristics and unknown parameters. First, we define the equations of motion and error system of the unmanned vessel, and then design an repetitive learning controller composed of system error and estimated unknown parameters based on repetitive learning control and adaptive control. The stability of the unmanned vessel model controlled by the designed controller is verified through the analysis of the Lyapunov stability. Simulation shows that the error converges asymptotically to zero with semi-global result, confirming that the unmanned vessel is moving toward a given ideal path, and verifies that the controller is also feasible.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.392-401
• /
• 2014

A fast-transient repetitive control strategy for a three-phase shunt active power filter is presented in this study to improve dynamic performance without sacrificing steady-state accuracy. The proposed approach requires one-sixth of the fundamental period required by conventional repetitive control methods as the repetitive control time delay in the synchronous reference frames. Therefore, the proposed method allows the system to achieve a fast dynamic response, and the program occupies minimal storage space. A proportional-integral regulator is also added to the current control loop to eliminate arbitrary-order harmonics and ensure system stability under severe harmonic distortion conditions. The design process of the corrector in the fast-transient repetitive controller is also presented in detail. The LCL filter resonance problem is avoided by the appropriately designed corrector, which increases the margin of system stability and maintains the original compensation current tracking accuracy. Finally, experimental results are presented to verify the feasibility of the proposed strategy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1101-1106
• /
• 2003

As the disk in the ODD rotates, disturbances acting on the ODD servo system generally have periodic components. Such disturbances can make the system unstable and make the controller hard to work. The repetitive controller can be the solution of the periodic disturbances by making the periodic control signals. In this paper repetitive controller is proposed that make the control signal follow the periodic disturbances. A low pass filter, which can make the system stable, is proposed by the simple stability conditions. We will show the performance of the repetitive controller in actual commercial system. Simulation and experimental results will be given as the evidences

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.150.5-150
• /
• 2001

This paper deals with a modified repetitive control method for compensating automatic gauge control (AGC) to reduce the effect of skid mark which directly influence the quality of products in plate mill process. Since the skid mark on the plate have thermal difference, it makes a different stretching rate and deflection of thickness. Firstly, the (AGC) system and the plate mill process are described by considering function in each control levels. The skid mark of the plate in practical control fields is shown. Also, its frequency variation is given by on-line FFT analysis method. Secondly, a key idea of the modified repetitive control method with time varying period disturbance is represented and compared with standard repetitive control method. Lastly, in simulation ...

• 한국지능시스템학회논문지
• /
• 제15권2호
• /
• pp.135-142
• /
• 2005

본 논문에서는 변하는 주기 기준 신호를 추종하기 위한 광학 디스크 드라이브의 적응 반복 제어 기법을 제시한다. 주기가 알려진 주기적인 외란은 반복 제어 개념을 이용하면 충분히 제거할 수 있다. 광학 디스크 드라이브는 다양한 속도를 지원하기 때문에 변하는 주기의 외란을 가진다. 기준 주기 변화를 추종하기 위해 샘플링 주파수를 변화시키는 반복 제어를 기초로 하여 주기가 변하는 외란을 다루기 위한 적응 반복 제어를 제안한다. 제안한 제어 기법은 반복 제어기와 주파수 발생기고 구성된다. 전자는 외란 주파수의 고정 배수에서 동작하는 가변 샘플러를 사용하고 후자는 외란 주파수에 따라 변하는 샘플링 주파수를 발생한다. 광학 디스크 드라이브 제어 대한 실험 결과에서 제안한 기법의 우수성과 랜덤 탐색 시간의 개선을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.663-668
• /
• 1989

Control methods to achieve efficient and accurate deburring robots are proposed. For efficiency, cutting speed is controlled adoptively with the cutting load. For accuracy, it adopts repetitive control. Since usual repetitive control cannot afford dynamical speed changes, the proposed method controls in an interpolating manner using several waveforms stored in the controller. Successful experimental results axe shown.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.122-128
• /
• 1996

In high speed and high precision assembly systems such as a surface mounting device and robotend effector, the contact force control is required. As the operation repeats, the repetitive control is applied to reduce the periodic contact force errors. Since high order unmodelled dynamics are easily excited in contact force control, a Q filter was introduced and its robust stability was analyzed. Simulation and Experimental results show the effectiveness of the algorithm.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.819-829
• /
• 2015

This paper presents a shunt active power filter (SAPF) for compensating inter-harmonics and harmonics when inter-harmonics content is evident in the grid. The principle of inter-harmonics generation in the grid was analyzed, and the inter-harmonics effect on repetitive controllers was discussed in terms of control performance. Traditional repetitive controllers are not applicable in inter-harmonic compensation. Moreover, the effect of an ideal controller on harmonics signals was analyzed on the basis of the internal model principle. The repetitive controller was improved in the form of a basis function according to theoretical analysis. The finite-dimensional repetitive controller, which is also called the multiple-period repetitive controller, was designed for the control of multiple periodic signals. A selective harmonic compensation system was developed with SAPF. This system can be used to compensate harmonics and inter-harmonics in the grid. Finally, system control performance was verified by simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.195-196
• /
• 2017

This paper proposes a permanent magnet synchronous motor(PMSM) control using a repetitive controller. Repetitive controllers are often used to eliminate periodic disturbances. Based on this, it is possible to alleviate the torque disturbance occurring at a constant cycle to the load of the motor. This paper proposes a method of rejecting periodically generated disturbances by using a repetitive controller and verified by simulation.