• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.160-166
• /
• 2012

PAPS(학생건강체력평가시스템, Physical Activity Promotion System)를 위한 반사형 맥박수 측정 장치를 개발 하고 성능평가를 수행하였다. 본 연구를 위해 제작된 센서 모듈은 저전력 구동을 위해 chip LED 및 photo TR.를 이용하여 맥파를 측정하였다. 측정된 맥파신호는 HPF, LPF와 OP Amp.를 이용하여 신호를 전처리하였으며, 전처리한 맥파신호는 LabVIEW로 디스플레이하였다. 또 LabVIEW는 원신호를 받아들여 유효신호를 추출하고, 맥박을 계산하기 위한 알고리즘을 포함한다. 이러한 시스템과 알고리즘을 이용하여 운동상태의 피실험자를 대상으로 높은 정확도와 반복성을 갖는 측정 기구로의 적용이 가능함을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.392-393
• /
• 2005

Due to the temporal and spatial simultaneity and the high-frequency repetition, the data set retrieved from the satellite observation is considered to be the most desirable ones for the study of air-sea interaction. With rapidly developing sensor technology, satellite-retrieved data has experienced improvement in the accuracy and the number of parameters. Nevertheless, since it is still impossible to directly measure the heat fluxes between air and sea, the bulk method is an exclusive way for the evaluation of the heat fluxes at the sea surface. It was noted that the large deviation of air temperature in the winter season by the linear regression despite good correlation coefficients. We propose a new algorithm based on the Fourier series with which the SST and the air temperature. We found that the mean of air temperature is a function of the mean of SST with the monthly gradient of SST inferred from the latitudinal variation of SST and the spectral energy of air temperature is related linearly to that of SST. An algorithm to obtain the air temperature over the sea was completed with a proper analysis on the relation between of air temperature and of SST. This algorithm was examined by buoy data and therefore the air temperature over the sea can be retrieved based on just satellite data.

• 인지과학
• /
• 제12권4호
• /
• pp.41-47
• /
• 2001

집단화의 새 원리로 제안된(Palmer & Rock. 1994) 균질 연결성이 부분들을 한 지각 단위로 처리하는 데에 효과가 있는지를 알아보기 위해 순간 노출된 자극판에서 표적의 정체를 식별하게 하는 실험을 수행하였다. 실험 1과 2에서 균질 연결된 자극판과 분리된 자극판에서 보고 정확률의 차이가 없었다. 자극판 전체의 형태를 보고하게 하는 실험 3에서 균질 연결성의 효과가 관찰되었으나. 여전히 반복 제시된 자극판의 처리가 상대 제시된 자극판의 처리보다 열등한 부적 반복효과가 관찰되었다. 이는 순간 노출된 형태의 지각에 균질 연결성의 효과가 크지 않음을 뜻한다

• 한국항해학회지
• /
• 제3권1호
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1009-1015
• /
• 2013

Ultra-short laser pulses are effective, when high requirements concerning accuracy, surface roughness and heat affected zone are demanded for surface structuring. In particular, picosecond laser systems that are suited to be operated in industrial environments are of great interest for many practical applications. This paper focused on inducing optimum process parameters for higher volume ablation rate by analyzing a relationship between crater diameter and optical spot size. In detail, the dependency of the volume ablation rate, penetration depth and threshold fluence on the pulse duration 8 ps and wavelength of 515 nm was discussed. The experimental results showed that wavelength of 515 nm resulted in less threshold fluence ($0.075J/cm^2$) on copper than IR wavelength ($0.3J/cm^2$). As a result, it was possible that optimum fluence for higher volume ablation rate was achieved with $0.28J/cm^2$.

• 소성∙가공
• /
• 제23권3호
• /
• pp.171-177
• /
• 2014

The current collector for the molten carbonate fuel cell (MCFC) which has sheared protrusions is manufactured by the three-stage forming process that integrates slitting, preforming and final forming. Due to the repetition of sheared protrusions, an effective simulation method is required to predict the mechanical behavior. In the current study, a sheet with sheared protrusions was assumed to be an orthotropic plate, which has the same length, width and height. FEM simulations were conducted to evaluate the homogenized properties of the current collector, which has 4 (longitudinal direction) x 4 (transverse direction) sheared protrusions. The simulation model was constructed using hexahedral mesh coarsening. From the verification examples, it was found that the proposed simulation method was efficient within reasonable accuracy. The calculated homogenized properties can be applied to the design of a stack for molten carbonate fuel cells and the prediction of mechanical behavior for other applications.

• Journal of Astronomy and Space Sciences
• /
• 제36권2호
• /
• pp.97-103
• /
• 2019

An automated signal-acquisition method for the NASA's space geodesy satellite laser ranging (SGSLR) system is described as a selection of two system parameters with specified probabilities. These parameters are the correlation parameter: the minimum received pulse number for a signal-acquisition and the frame time: the minimum time for the correlation parameter. The probabilities specified are the signal-detection and false-acquisition probabilities to distinguish signals from background noise. The steps of parameter selection are finding the minimum set of values by fitting a curve and performing a graph-domain approximation. However, this selection method is inefficient, not only because of repetition of the entire process if any performance values change, such as the signal and noise count rate, but also because this method is dependent upon system specifications and environmental conditions. Moreover, computation is complicated and graph-domain approximation can introduce inaccuracy. In this study, a new method is proposed to select the parameters via a conditional equation derived from characteristics of the signal-detection and false-acquisition probabilities. The results show that this method yields better efficiency and robustness against changing performance values with simplicity and accuracy and can be easily applied to other satellite laser ranging (SLR) systems.

• Computers and Concrete
• /
• 제32권6호
• /
• pp.625-637
• /
• 2023

The application of ML approaches in determining the resisting capacity of fire damaged RC columns is introduced in this paper, on the basis of analysis data driven ML modeling. Considering the characteristics of the structural behavior of fire damaged RC columns, the representative five approaches of Kernel SVM, ANN, RF, XGB and LGBM are adopted and applied. Additional partial monotonic constraints are adopted in modelling, to ensure the monotone decrease of resisting capacity in RC column with fire exposure time. Furthermore, additional suggestions are also added to mitigate the heterogeneous composition of the training data. Since the use of ML approaches will significantly reduce the computation time in determining the resisting capacity of fire damaged RC columns, which requires many complex solution procedures from the heat transfer analysis to the rigorous nonlinear analyses and their repetition with time, the introduced ML approach can more effectively be used in large complex structures with many RC members. Because of the very small amount of experimental data, the training data are analytically determined from a heat transfer analysis and a subsequent nonlinear finite element (FE) analysis, and their accuracy was previously verified through a correlation study between the numerical results and experimental data. The results obtained from the application of ML approaches show that the resisting capacity of fire damaged RC columns can effectively be predicted by ML approaches.

• 한국산학기술학회논문지
• /
• 제19권7호
• /
• pp.63-71
• /
• 2018

본 논문에서는 생화 장식용 꽃 받침대를 자동으로 제작하기 위하여 고주파 융착기를 사용하여 생화 장식용 꽃 받침대 자동 제작 시스템을 개발하였다. 수동으로 제작되어지는 생화 꽃 받침은 소비자의 수요를 충족시키지 못하여 자동 제작시스템을 통해 생산성을 높이기 위하여 개발을 진행하였다. 생화 장식용 꽃 받침대는 플라스틱으로 이루어진 꽃 받침대인 캡과 캡을 지지하는 부직포로 이루어진 밑판으로 구성된다. 캡을 고주파 융착기로 이송하기 위해 가이드를 설계하였으며 가이드의 재질 및 형상에 따른 실험을 통해 최적의 가이드를 개발하였다. 전체 시스템을 제작하기 위하여 가이드와 악세서리의 무게를 정하고 그에 적합한 모터와 풀리를 계산을 통하여 도출해 냈다. 자동 제작 시스템의 제어는 PCB 기판을 기반으로 하여 안정성 및 보안성을 높였으며 리모컨을 사용하여 수동모드와 자동모드를 사용할 수 있도록 하였다. 제작 후 시스템의 이송정밀도와 반복 정밀도를 실험해본 결과 이송정밀도는 X축 2.7mm Y축 1mm로 측정 되었고 반복 정밀도는 0mm로 측정되어 생화 장식 꽃 받침대를 제작하는데 문제가 없다는 것을 확인하였다. 생산성을 확인해본 결과 1일 8시간 기준 수동 제작시 35개를 생산하고 자동 생산 시 70개를 생산하여 200%의 생산성을 높인 것을 확인하였다.

• 대한전자공학회논문지TC
• /
• 제43권1호
• /
• pp.41-48
• /
• 2006

RFID 시스템에서의 태그인식속도와 정확성을 결정하는 Anti-collision 알고리즘은 매우 중요하다. 본 논문에서는 Bin 슬롯을 사용하는 EPC CLASS 1 UHF Anti-collision 알고리즘의 성능을 분석하고, 기존 알고리즘을 개선한 Anti-collision 알고리즘을 제안한다. 제안한 알고리즘에서는 리더가 Bin 슬롯 정보를 저장하고, 그 정보를 이용하여 불필요한 PingID 명령의 반복 회수를 줄여 태그인식시간을 줄인다. 또한 제안한 알고리즘에서 ScrollAllID 명령을 사용하면 리더는 태그 E들의 충돌정보를 알게 되고, 그 정보를 이용하여 PingID 명령 반복회수를 줄여 태그인식시간을 단축시킬 수 있다. 제안한 알고리즘의 성능을 수학적으로 분석하고 기존의 알고리즘과 비교하였으며, 수학적 성능분석 결과 제안한 알고리즘의 성능이 월등하게 우수한 것을 확인하였으며, 시뮬레이션을 통하여 그 결과를 검증하였다. 제안한 알고리즘은 기존 알고리즘보다 랜덤한 ID를 갖는 태그를 사용했을 경우 충돌이 발생한 태그의 개수가 20개 일 때 약 $70\%$ 정도의 성능 향상이 있었으며, 태그의 개수가 200개 일 때 약 $130\%$ 정도의 성능 향상이 있었다. 또한, 기존 알고리즘은 순차적인 태그 ID를 사용하였을 경우 랜덤한 ID를 사용하였을 경우보다 성능이 저하 되었으나 제안한 알고리즘은 순차적인 태그 ID를 사용하였을 경우 랜덤한 ID를 사용하였을 경우보다 최대 약 $16\%$ 정도 성능이 향상되었다.