• Korean Journal of Veterinary Service
• /
• v.33 no.2
• /
• pp.167-171
• /
• 2010

Majority of asthma and atopic dermatitis are known to be spontaneously sensitive to house dust mite allergen. Control of house dust mite populations has been principally achieved by using chemical insecticides. But the risk to human health would be a potential problem. Moreover, house dust mite remain as allergens even after death. So, It is more effective method keeping the house dust mites away than killing them. The use of plant-derived repellents has been considered as a promising alternative to chemical repellents. Eucalyptus is a diverse genus of flowering trees in the myrtle family, Myrtaceae. It has insect repellent properties and is an active ingredient in some commercial mosquito repellents. These studies were carried out to investigate repellent effects of Eucalyptus oil against house dust mites and compare lemongrass oil. Eucalyptus oil and lemongrass oil were exposed at different doses (0.2, 0.1, 0.05, 0.025, 0.0125, $0.00625{\mu}l/cm^2$) and different times (1, 3, 6 hours) on house dust mites. The most effective dose of Eucalyptus and lemongrass oils against house dust mites was $0.1{\mu}l/cm^2$ and $0.025{\mu}l/cm^2$. Each repellent effect(%) in most effective dose was 90.3% (Eucalyptus) and 80.8% (lemongrass).

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.259-265
• /
• 2014

This study is to analyze durability of water-repellent paints mixed with water-repellents as outer surface finishing materials, and evaluate its feasibility. General functions and water-repelling effects were tested, and the feasibility was evaluated based on the test results. The experimental results of heat conduction durability, air permeability, absorption, and bond strength suggested that water-repellent paints mixed with water-repellents were suitable for finishing materials. Considering overall general durability performances, stable mixing ratios were 2, 5, and 8%.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.1020-1025
• /
• 2012

In this study, we fabricated the superhydrophobic and super-water-repellent surface with the micro/nano scale structures using simple conventional silicon wet-etching technique and the black silicon method by deep reactive ion etching. These fabrication methods are simple but very effective. Also we reported the droplet impact experimental results on the micro/nano-scaled surface. There are two representative impact behaviors as "rebound" and "fragmentation". We found the transition Weber number between "rebound" and "fragmentation" statements, experimentally. Additionally, we concerned about the dimensionless spreading diameters for our super-water-repellent surface. The novel characterization method was introduced for analysis including the "fragmentation" region. As a result, our super-water-repellent surface with the micro/nano-scaled structures shows the different impact behaviors compared with a reference smooth surface, by some meaningful experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.104-109
• /
• 2019

Damage caused by wild animals such as pheasants and magpies is a problem in rural areas. A bird repellent system based on sensing and repelling farm pest animals and birds is proposed herein. This system is equipped with a bird model part on a supporting platform and comprises a sound source generator, a system control user interface, and a sensor in the center. The sensor is composed of an illuminance sensor and a PIR sensor. The illuminance sensor distinguishes between day and night, whereas the PIR sensor detects birds or wild animals and outputs them from the sound generator. The entire system can be managed easily by the user interface and system control.

• Parasites, Hosts and Diseases
• /
• v.59 no.5
• /
• pp.465-471
• /
• 2021

Culicoides biting midges (Diptera: Ceratopogonidae) are hematophagous arthropod vectors that transmit epizootic arthropod-borne viruses (arboviruses). Arboviruses are recognized as causes of pregnancy loss, encephalomyelitis, and congenital malformations in ruminants. Therefore, continuous monitoring and control of Culicoides, which causes significant damage to industrial animals are necessary. We performed attraction and repellent tests in Culicoides using various essential oils, cow dung, and carbon dioxide (CO₂). Culicoides tended to move more to cow dung (60.8%, P<0.0001) and CO₂ (63.8%, P<0.01). To the essential oils as repellents, 26.1% (P<0.0001), 18.7% (P<0.001), and 25.5% (P<0.01) of the Culicoides moved to the lavender, lemongrass, and eucalyptus chamber, respectively. The Culicoides that moved to the 3 essential oils chambers showed markedly low activity. Collectively, it was showed that Culicoides tended to be attractive to cow dung and CO₂, and repellent from the 3 essential oils.

• Corrosion Science and Technology
• /
• v.20 no.5
• /
• pp.256-265
• /
• 2021

Titanium is applied in various industries due to its valuable properties and abundant reserves. Generally, if a highly uniform oxide structure and a high-density oxide film is formed on the surface through anodization treatment, the utility value such as color appearance and corrosion inhibition efficiency is further increased. The objective of this study was to determine improvement of water-repellent property by controlling titanium oxide parameters such as pore size and inter-pore distance to improve corrosion resistance. Oxide film structures of different shapes were prepared by controlling the anodization processing time and voltage. These oxide structures were then analyzed using a Field Emission Scanning Electron Microscope (FE-SEM). Afterwards, a Self-Assembled Monolayer (SAM) coating was performed for the oxide structure. The contact angle was measured to determine the relationship between the shape of the oxide film and the water-repellency. The smaller the solid fraction of the surface, the higher the water-repellent effect. The surface with excellent hydrophobic properties showed improved corrosion resistance. Such water-repellent surface has various applications. It is not only useful for corrosion prevention, but also useful for self-cleaning. In addition, a hydrophobic titanium may open up a new world of biomaterials to remove bacteria from the surface.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.57-63
• /
• 2019

Ricania sp. is a pest to many crops in Korea. This pest prefers fruit crops especially, blueberry and apple trees. We tested the possibility of Ricania sp. control using of methylcinnamate. In the laboratory bioassay, the mortality of methylcinnamate against Ricania sp. adult with 100 and 250 time diluted solution was 36.6% and 13.3% respectively. While repellent that the use of methylcinnamate resulted rate of 43.3% with 100 time diluted solution and 40.0% in 250 time diluted solution. Insecticidal and repellent effect in semifield bioassay were higher than those in laboratory bioassay. From this result, methylcinnamate might have synergic effect for Ricania sp. management. The result of this study showed a possibility of Ricania. sp. control using methylcinnamate.

• Journal of the Korean Applied Science and Technology
• /
• v.8 no.1
• /
• pp.9-20
• /
• 1991

In the preparation of acrylic water repellent(EDLWC). quaternized 2-diethylarrunoethylmethacrylate-stearylmethacrylate copolymer (DSACC) and quaternized 1-Iaurovlbis(aminoethyl)-2-dodecylimidazoline(LDDIC) were selected as a basic resin and the improving agent such as softening effect and hydrostatic pressure of the water repellent. EDLWC was prepared by blending waxes and emulsifier for waxes with various ratio to DSACC and LDDIC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyester-cotton(P/C) blended fabrics treated with EDLWC only or addition of textile finishing resin, the physical properties were increased. Sodium acetate was the most effective catalyst in the water repellency among the various kinds of catalyst. and the reasonable concentration of the catalyst was 1. 4 wt%. EDLWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing. The reaction mechanism between P/C blended fabrics and EDLWC in the presence of catalyst was proposed. And also, the longitudinal view of the P/C blended fabrics treated with water repellent was observed with scanning electron microscope.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.133-139
• /
• 1974

The objective of this study is to compare the effects of raw materials as method of speeding up mounting of matured silkworm, for reducing concentrated labor during mounting periods. The results obtained from this study are summarized as fellows： (1) Quercus acutissima Carrs showed the most remarkable effect of repellent. Persicaria blumei Gross and Artemisia asiatica Nakai were followed in order. The rest repellents were also expected to be applicable. considering known material (silk-up) with lower mounting percentage. (2) The effective methods of preparation of repellent were to make distillate. Decocted solution type was considered to be the easiest way of preparation. (3) It seemed to be that there was little effect of repellent on the qualities of cocoon and silk. (4) When a repellent was applied to a silkworm bed, immatured silkworms were observed to mount. Thus it suggests that the repellent will give remarkable effects only when the degree of matured of silkworms is uniform.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.