• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.244-250
• /
• 2012

In this paper, worldwide standards and regulations on broadcasting services are reviewed to improve the fringe area of terrestrial DTV broadcasting services. Using these results, in-band/out-of-band emission requirements of low power DTV repeater with 10mW/MHz radiating power are proposed, and experimentally evaluated and verified. Using the proposed regulations, compact and cost-effective DTV repeater can be easily implemented to broaden DTV broadcasting coverage and to improve small/medium size DTV fringe areas.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.97-104
• /
• 2016

In this paper, in order to relieve the area of terrestrial DTV broadcasting, we watch the same channel DTV Repeater output ICS using nano field test and analysis of effect was proven. Interspersed throughout the blanket area(natural) and buildings(artificially) 7 established the field selected as the test area, and each station(KBS1, KBS2, MBC, SBS, EBS) Extremely Low Power ICS Repeater the same channel of the receiving field strength and after install, SNR(Signal to Noise Ratios) verify the equipment to measure the efficacy and minimal output for future ICS type nav should you wish to provide a research-based for the spread.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.163-170
• /
• 2012

This thesis suggests the application to the people who are using smart phone which is based on the Android operation system that makes it available to check their call and sms by a repeater and display in the limited places such as at the swimming pool or spa. This application is designed to save user's basic information. And when the user gets a call or a sms, it can make the sender number and fundamental information a data by PhonStateListener and SmsReceiver. The data is uploaded by bluetooth of a repeater. The smart phone user can use the repeater to check the received information by display.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.97-103
• /
• 2010

In this paper, worldwide standards and regulations on in-band/out-of-band emission characteristics of DTV broadcasting equipments are reviewed, and emission mask requirements of several equipment types are analyzed. Out-of-band emission mask draft suitable for DTV repeater is proposed and its usefulness is evaluated and verified in the experiments. Using the proposed standard, small-sized and cost effective DTV repeater can be implemented to broaden DTV broadcasting coverage for digital switchover.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.111-116
• /
• 2005

We propose a BASK (Binary Amplitude Shift Keying) system for Giga-bit Modem in millimeter band. The proposed system consists of a high speed shutter of the transmitter and a repeater of the receiver. The shutter of the proposed system is introduced for pulse shaping to improve the intersymbol interference (ISI). The repeater consists of several stage converters. A converter is constructed with a low pass filter and a limiter. The repeater can improve the signal-to-noise ratio (SNR) and make the rectangular pulse train. The proposed system is a simple system that uses conversion method without IF (Intermediate Frequency) process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1188-1196
• /
• 2010

In this paper, worldwide standards and regulations on in-band/out-of-band emission characteristics of DMB broadcasting equipments are reviewed, and emission mask requirements of terrestrial low power DMB repeater under 10mW/MHz are analyzed. Out-of-band emission mask drafts suitable for single/multiple block low power repeaters are proposed. Validity and usefulness of the proposed drafts is evaluated and verified in the several experiments. Using the proposed standard, small-sized and cost-effective DMB repeater can be easily implemented to broaden DMB broadcasting coverage by reducing weak signal areas.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.57-62
• /
• 2012

In this paper, WCDMA indoor repeater antenna using an absorber based on metamaterial structure for high isolation is proposed. The proposed antenna consist of the main patch with the absorber based on metamaterial structure and parasitic patch. The WCDMA bandwidth is obtained by utilizing the coupling between the main and parasitic patches. The size of the absorber based on metamaterial structure is $13mm{\times}13mm$, the absorption is about 94 % at 2.18 GHz. The isolation characteristic of proposed WCDMA indoor repeater antenna between the service and donor antennas is improved by using a absorber based on metamaterial. The proposed WCDMA indoor repeater antenna has a gain higher than 6 dBi with a VSWR less than 2, and an isolation between the service and donor antennas greater than 85 dB over the WCDMA band from 1.92 GHz to 2.17 GHz. And size of the proposed antenna is $75mm{\times}75mm$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.111-117
• /
• 2009

In the wideband code division access (WCDMA) systems, a pilot channel is used to determine WCDMA network coverage, cell identification, synchronization, timing acquisition and tracking, user-set handoff, channel estimation, and so on. A wireless repeater, which is deployed in the urban area for the WCDMA system to meet the growing demand on wireless communication services, has the possibility to receive several pilot signals from a large number of base stations, however, cannot distinguish its service base station's signal among them. This pilot interference results in frequent handoffs in the user equipment, which degrades the radio reception, transmission efficiency, quality of service, and channel capacity and increases the unwanted power consumption. In this paper, thus, we propose a pilot pollution interference cancellation scheme using one of the adaptive estimation algorithms, normalized least mean square (NLMS), which is applicable to a wireless repeater. We carried out link-level and network-level computer simulations to evaluate the performance of the proposed scheme in a wireless repeater. The simulation results verify the bit error rate (BER) improvement in the link level and the call drop probability improvement in the network level.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.565-566
• /
• 2018

Conventional IoT systems are centralized systems that process information from the server on the device and most of them use a wireless LAN network. However, There may arise a problem of when the signal of the wireless LAN network is not reached, the IoT product can not be used and accessing a wireless LAN network having a stronger signal. In order to solve this problem, this paper proposes a system that a method to maintain stability of IoT products by using repeaters, and to manage IoT products and reduces the burden on the server by processing part of the data processed by the server in the repeater. The problems caused by the signal of the wireless LAN network can be solved by amplifying the signal with the repeater, and the overloading problem that can occur in the server can be solved by controlling the repeater's IoT product connected thereto to reduce the server usage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1125-1132
• /
• 2011

The purpose of this study is to suggest installation methods of a mobile-communication repeater into a lift system with consideration of EMC. Two approaches, one(Solution 1) is realized with a repeater installed in a lift hoistway and another(Solution 2) installed inside a lift, were proposed. It is confirmed that the Solution 1 is more effective than the Solution 2. And it is suggested that the EIRP of a repeater must be limited to be ${\leq}$-5 dBm by considering electromagnetic immunity level for a lift and safety margin of 20 dB. This limit can provide suitable electromagnetic environment inside a lift with precise power-control mechanism of mobile communication systems. This study could be a good example of Green ICT by improving electromagnetic environment in spite of radio use.