• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.1-10
• /
• 2021

Recently, the repair and recycling of damaged mechanical parts via metal additive manufacturing processes have been industrial points of interest. This is because the repair and recycling of damaged mechanical parts can reduce energy and resource consumption. The directed energy deposition(DED) process has various advantages such as the possibility of selective deposition, large building space, and a small heat-affected zone. Hence, it is a suitable process for repairing damaged mechanical parts. The shaft is a core component of various mechanical systems. Although there is a high demand for the repair of the shaft, it is difficult to repair with traditional welding processes because of the thermal deformation problem. The objective of this study is to propose a repair procedure for a damaged shaft using the DED process and discuss its applications. Three types of cases, including a small shaft with a damaged surface, a medium-size shaft with a worn bearing joint, and a large shaft with serious damage, were repaired using the proposed procedure. The microstructure and hardness were examined to discuss the characteristics of the repaired component. The efficiency of the repair of the damaged shaft is also discussed.

• 대한한의학회지
• /
• 제24권4호
• /
• pp.136-138
• /
• 2003

Purpose : A clinical case of diabetic foot-wound repair using Hirudo medicinalis therapy and its application is reported and discussed. Methods : The subject was a sixty-six-year-old woman diagnosed with a non-healing wound indicating the amputation of her right diabetic foot. Instead, Hirudo medicinalis therapy was performed twelve times over forty days, twice a week. The transition of wound closure was observed with the naked eye, and the plethysmogram was measured at the beginning and end of the treatment period. Results : The wound contracted with decreased exudate, collagen-like connective tissue sprouted, and then the wound gradually closed. The initial value (-0.08) of the dicrotic elastic index rose to -0.03. Conclusion : Hirudo medicinalis therapy had a positive effect on the wound repair, without a negative effect on the circulation, allowing the foot to be saved. It is necessary to investigate its wound repair mechanism for the further development of the Sahyul method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.147-148
• /
• 2011

This study applied BIM(Building Information Modeling) technology for Long-life Housing within exterior, interior and building equipment. There has many changes and depression infill material after construction. Therefore to understand establishment of repair and replacement cycle is necessity. In addition, the method of classification is necessary because of construction equipment efficiency. On this study, we will find how can we manage them and establish the repair and repairment cycle by applying BIM technology.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권1호
• /
• pp.43-57
• /
• 2011

In the paper, we consider two-dimensional warranty policy with failure times and repair times. The failure times are considered within the warranty period and the repair times are considered within the repair time limit. Under the renewable warranty policy and non-renewable warranty policy, we consider the number of warranty services in the censored area by warranty period and repair time limit to conduct warranty cost analysis. We investigate the field data to check their dependency and implement our proposed approaches to conduct warranty cost analysis using the parametric methods. Numerical examples are discussed to demonstrate the applicability of the methodologies and results based on the proposed approach in the paper.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.349-355
• /
• 2006

The gas turbine components is used on high temperature conditions which under severely circumstance with start-up and stop several times. Therefore, it is used nickel-base superalloys like and GTD-111DS. Damaged buckets on the t긴ade tip during operating are repaired per 24,000 hr to three times according to repair specification of manufacture. It is applied pre-heat, HIP(hot isostatic pressing) and post-heat treatment to support welding repair on blade tip effectively. On this study, It is utilize of $WRAP^{TM}$ (welding repair advanced process) method to make tension test specimens for this study, And then, material strength and characteristic for GTD-111DS was analyzed.

• 경영과학
• /
• 제26권3호
• /
• pp.145-156
• /
• 2009

The probability distribution of the repair process should be determined to choose the optimal spare level of a weapon system with a queueing model. Though most weapon systems have a multi-step repair process, previous studies use the exponential distribution for the multi-step repair process. But the PH distribution is more appropriate for this case. We utilize the PH distribution on a queueing model and solve it with MGM(Matrix Geometric Method). We derive the optimal spare level using the PH distribution and show the difference of results between the PH and exponential distribution.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.111-112
• /
• 2014

This research focuses on the study that micro-crack of concrete is repaired to use self-healing technology. Self-healing concrete is widely studied in domestic and international construction field recently. Micro-crack(less than 0.3mm)of concrete is repaired using a crack repair stick which containing self-healing agents. Therefore, the crack on construction structure will be easily repaired by using a crack repair stick. Also experiment was proceeded because of evaluating the long term durability.

• 대한구순구개열학회지
• /
• 제11권2호
• /
• pp.77-82
• /
• 2008

The harmonious lip length, residual scar and Cupid's bow width and peak with a normal side are the aims of a unilateral cleft lip repair. Also, long term amelioration without necessary of revisional surgeries may be the ideal conditions. No one method can satisfy the wide varieties of cleft lip deformities. Recently with rearrangement of paraoral muscle and some modifications, a straight line repair technique has been concerned again. Straight scar line, simplicity, and short learning curve are the advantages of the straight line technique. Here two cases of the simple straight line technique were presented and discussed for its usefulness and reliability with short reviews of previous reports.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.105-109
• /
• 2003

Structure surfaces damaged due to many causes are repaired by several special mortars. But wide studies about the permeability of these mortars were rarely conducted. In this study compressive strength test, flexural strength test and bond strength test of these mortars were conducted. And chloride ion penetration test was also conducted to explore the permeability charcteristics of selected repair mortars. This test was carried out following the standard ASTM C1202-91. Colouriemtric penetration depth can be drawn from these test results using a relationship equation between colourimetric penetration depth and charge passed which C. Andrade suggested. Diffusion coefficient can be calculated by CTH rapid method. To the end, the present study can provide a firm base for the application of repair mortars to concrete structures.

• 대한산업공학회지
• /
• 제33권3호
• /
• pp.364-372
• /
• 2007

The cost modeling of the LCD manufacturing system with the repair and the rework process is hard to achieve because of it's complex manufacturing process. The technical cost modeling divides each process separately and hierarchically, so it is very useful to calculate the total manufacturing cost of the complex manufacturing system. We applied the method to the complex LCD manufacturing system to obtain more accurate cost model. Yields are the most important control parameters in manufacturing. In this paper, we propose a yield based cost model for the LCD manufacturing system and reveal the relationship between manufacturing yield and cost. Through the model, we can estimate the manufacturing cost on the basis of yields that are control indicators of manufacturing. Some simulations are performed to observe the effects of the yield to the cost, and the results are coincide with the real situation. With the proposed model, we expect to develop some optimization problems for enlarging productivity in the LCD industry.