• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.151-159
• /
• 2011

Due to the Korean government's renewable energy support policy such as the renewable energy utilization building certificate and enlarging the compulsory ratio of investment on the public building, the rooftop photovoltaic projects are expanding rapidly. It is very important for the rooftop photovoltaic projects to analyze the shading effect of the adjacent structures or own facilities. But, the photovoltaic arrangements are planned by the experience of the designers or simple graphic tools. The purpose of this study is to build the process model for optimizing of rooftop photovoltaic arrangement based on three-dimensional geo-spatial information.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1061_1061
• /
• 2009

Running low of fossil fuel energy forces the industry to find a new way to overcome this energy crisis. One of the solutions is using the unlimited and everlasting energy sources like wind, sun, water, and so on. Especially, sun energy becomes the hottest issue in recent years because of its merit in installation, operation and abundant material source of silicon. In 2008, about 5.5GW photovoltaic (PV) system has been installed all around world. Many professional renewable energy organizations expect that the total PV system installation will be 30GW. To sustain the long-term stability of the PV system, several institutes perform the test based on IEC standards like IEC 61215 for silicon crystalline PV module and IEC 61646 for thin film PV module. Also in South Korea, Korea Institute of Energy Research (KIER) performs the certificate test according to IEC 61215 standards. In this paper, we want to summarize and inform the 3 years‘ test results of domestic and foreign PV modules. The specific and technical explanation will be shown in the following paper in detail.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.125-131
• /
• 2011

Recently, the application of renewable energy to building is steadily increasing in domestic due to the energy saving efforts around the world. Among the all, wind energy is one of the rising energy source because of its high technological maturity. Domestic wind power market has rapidly increased in recent years but the certification system for wind turbine has not been activated since it was introduced in 2009. Thus, this study aims to propose the improvement of certification system for wind turbine by comparing domestic certification system with international certification system. The result of this study are as follows. First, domestic certification system needs to be subdivided and established by systematic standards. Second, it is considered that education about rating standards is required to wind turbine makers to activate domestic certification system. Third, domestic certification agenciesand test agencies need to be unified and reduced.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.81-88
• /
• 2020

The Renewable Portfolio Standard(RPS) which is in operated by country for many years is eco-friendly energy business. Although a variety of institute are accessing the RPS, it consists of a centralized system. Also, it shows opacity of data access in user's point of view. And each institutes is possessing their own data collected by themselves. Therefore decentralization and integrated control is demanded. Also, when institutes are attacked, the interruption of RPS can be existed. For resolving this issue, this study proposes the RPS using blockchain. Using the consortium method of blockchain, every institutes has possessing same data inserting REC data in block data, it is resolvable that transparency and security issue as transaction through verification of certain block. Furthermore, in case of one institute is paused by external attack, the role can be replaced by other institutes. This study tried the processing of putting data through ethereum network, therefore it presents the possibility of introducing the blockchain method in RPS.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.303-306
• /
• 2008

This study proposes an essential process of type certificate, which is load comparison for proving the calculated design load. The load measurement was carried out according to IEC 61400-13 standard and the load calculation was performed with same condition using FLEX 5 code. For more accurate load simulation, the controller parameter of original model at the design stage was modified to site optimized value and some node points are added to coincidence with measurement. The load comparison was performed with various wind parameter, turbulence intensity and wind shear. As a result, simulated loads ware good agreed with the measured load. Therefore, the calculated design loads according to IEC 61400-1 standard were proved to valid.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.29-42
• /
• 2016

This study analyzes the economic efficiency of utilizing hot waste water at a thermoelectric power plant, which is part of recent projects supported by the Korean government to foster new energy industry. The author proposes an institution that provides economic incentives to promote the project. Based on a method of calculating Levelized cost of energy (LCOE), this study finds that the LCOE of using hot waste water at power plants is higher than that of oil boiler, biomass and a power plant's auxiliary steam but similar to that of the geothermal system. Also, according to sensitivity analysis on the LCOE of each element in the system of using hot waste water, a distance of heat supply is most sensitive. Therefore, this study shows that when the government devises an incentive-based institution to expand the project of utilizing hot waste water, it is necessary to establish Renewable Energy Certificate (REC) weights that are differentiated by a distance of heat supply.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.525-529
• /
• 2016

Biomass co-firing to existing thermal power plants is one of the most economical and efficient way to reduce $CO_2$ emission from the plant. There are several methods of co-firing and it can be categorized into (1) Parallel co-firing, (2) Indirect co-firing, and (3) Direct co-firing. Parallel co-firing is the most expensive way to high-ratio co-firing because it requires biomass dedicated boiler. Direct co-firing is widely used because it does not need high capital cost compared with the other two methods. Regarding the direct co-firing, it can be classified into three methods- Method 1 does not need retrofit of the facilities because it uses existing coal mills for pulverizing biomass fuels. In this case high-ratio co-firing cannot be achieved because of poor grindability of biomass fuels. Method 2 needs biomass-dedicated mills and revision of fuel streams for the combustion system, and Method 3 needs additional retrofit of the boiler as well as biomass mills. It can achieve highest share of the biomass co-firing compared with other two methods. In Korea, many coal power plants have been adopting Method 1 for coping with RPS(Renewable portfolio standards). Higher co-firing ratio (> 5% thermal share) has not been considered in Korean power plants due to policy of limitation in biomass co-firing for securing REC(Renewable Energy Certificate). On the other hand, higher-share co-firing of biomass is widely used in Europe and US using biomass dedicated mills, following their policy to enhance utilization of renewable energy in those countries. Technical problems which can be caused by increasing share of the biomass in coal power plants are summarized and discussed in this report. $CO_2$ abatement will become more and more critical issues for coal power plants since Paris agreement(2015) and demand of higher share of biomass in the coal power plants will be rapidly increased in Korea as well. Torrefaction of the biomass can be one of the best options because torrefied biomass has higher heating value and grindability than other biomass fuels. Perspective of the biomass torrefaction for co-firing is discussed, and economic feasibility of biomass torrefaction will be crucial for implementation of this technology.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2014

A study on combustion characteristic and evaluation of cost benefit were carried out using dried sewage sludge to evaluate co-combustion with coal in a coal-fired power plant. In the result of proximate analysis, sewage sludge has 78.09%, 79.65% of moisture content in A STP(Sewage Treatment Plant) and B STP, respectively. The dried sewage sludges show 0.12, 0.14 of fuel ratio value, respectively and over 30,000kcal/kg of combustible index. It means that the dried sewage sludges needs to reform from the results of fuel ratio and combustible index. As a results of the economical benefit evaluation of dried sewage sludge, about 73.4 million won through using the dried sewage sludges instead of coal and 56.4 million won through REC(Renewable Energy Certificate) cost were saved, respectively. On the other hand, it occurs 4.2 million won of additional cost related to ash disposal and 2.6 million won of investment/operation cost for co-combustion facility. In conclusion, co-combustion of dried sewage sludges with coal in a coal-fired power plant saves about 123 million won. However, it needs to consider for power supply to produce dried sewage sludges and opportunity cost for environmental pollution and so on to evaluate more reasonable benefit of co-combustion.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.645-668
• /
• 2022

Hydrogen energy is emerging as an important means of carbon neutrality in the various sectors including power, transportation, storage, and industrial processes. Fuel cell power plants are the fastest spreading in the hydrogen ecosystem and are one of the key power sources among means of implementing carbon neutrality in 2050. However, high volatility in system marginal price (SMP) and renewable energy certificate (REC) prices, which affect the profits of fuel cell power plants, delay the investment timing and deployment. This study applied the real option methodology to analyze how the dual uncertainties in both SMP and REC prices affect the investment trigger price level in the irreversible investment decision of fuel cell power plants. The analysis is summarized into the following three. First, under the current Renewable Portfolio Standard (RPS), dual price uncertainties passed on to plant owners has significantly increased the investment trigger price relative to one under the deterministic price case. Second, reducing the volatility of REC price by half of the current level caused a significant drop in investment trigger prices and its investment trigger price is similar to one caused by offering one additional REC multiplier. Third, investment trigger price based on gray hydrogen and green hydrogen were analyzed along with the existing byproduct hydrogen-based fuel cells, and in the case of gray hydrogen, economic feasibility were narrowed significantly with green hydrogen when carbon costs were applied. The results of this study suggest that the current RPS system works as an obstacle to the deployment of fuel cell power plants, and policy that provides more stable revenue to plants is needed to build a more cost-effective and stable hydrogen ecosystem.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.140-140
• /
• 2010

최근 정부가 저탄소 녹색성장을 새로운 국정비전으로 제시하고 혁신적 그린에너지 기술개발을 위해 연평균 20%이상의 R&D 예산을 증액하고 있는 상황에서 연구개발결과의 상용화율 제고를 위한 연구기획, 평가, 관리시스템의 개선이 시급한 실정이다. 특히 선진국의 경우 최근 3년간 에너지분야 R&D의 상용화율이 미국 35.9%, 유럽 46.8%로서 24.2%인 한국에 비해 매우 높다고 할 수 있다. 이와같은 격차가 존재하는 것에 대해서 다양한 요인을 생각해볼 수 있겠지만, 크게 시장적인 또는 산업적인 측면에서의 중요도를 기준으로 연구과제를 선정하지 못하고 있다는 점과 연구개발결과를 효율적으로 사업화하고 있지 못하고 있다는 점을 생각해볼 수 있다. 특히 에너지 분야는 대규모 자금의 초기소요 및 개발기술 상용화기간의 장기화등으로 인해 사업화 실적이 타산업대비 매우 저조한 편이다. 이와같은 연구결과의 사업화와 관련된 문제점을 극복하기 위한 노력으로 국내에서 다양한 형태의 기술사업화 지원프로그램이 운영괴고 있으나, 에너지 분야에 특화된 프로그램은 부족한 상황이다. 반면에 미국의 경우, 재생에너지 R&D분야 전문투자자 그룹인 클린테크그룹 등을 중심으로 2002년부터 현재까지 다수의 녹색기술분야에 특화된 기술사업화 지원 프로그램을 운영하고 있다. 그 결과 현재까지 약 9년간 총 16억$의 투자유치에 성공함으로써 민간투자 활성화 역할을 담당하고 있다. 따라서 국내의 경우에도 이와같은 에너지 R&D 결과를 효과적으로 사업화로 연계시킬 수 있는 관련 프로그램 등이 시급히 도입되어야 할 것이다. 본 논문에서는 국내의 사업화 부진문제를 해결하기 위한 하나의 방안으로서 올해부터 정부주관으로 시행되고 있는 녹색인증사업을 활용하여 사업화가 유망한 기술 및 기업을 선별하고, 이에 대해 사업화 지원을 위한 후속프로그램을 적극 지원함으로써 연구개발결과의 경제적 활용도를 획기적으로 개선하는 방안을 제시하고자 한다. 또한 사업화 지원프로그램의 효율성을 높이기 위해 수도권, 영남권, 호남권 등 지역별 TP 등을 중심으로 기술사업화 협력 네트워크를 구축하고, 이를 기반으로 한 수요기술조사, 기술마케팅, 투자자유치 등의 관련프로그램을 개발하여 전단의 시스템과 융합시킴으로써 향후의 정부주도 R&D결과의 상용화율을 제고할 수 있는 시스템을 제안하고자 한다. 이에는 에너지 R&D분야별 기술적 시장적 특징분석, 지역별 산업특성과 기술공급 서플라이 체인분석을 토대로 한 기술이전 잠재수요기업 투자자를 대상으로 한 맞춤형 기술사업화 프로그램 등이 포함된다. 마지막으로 제안된 시스템에 대한 타당성 검증을 위해 올해년도에 시행한 녹색인증 기술사업화 연계프로그램 및 기술사업화 협력네트워크 활용사례 등을 분석하고, 향후 발전방향으로서 기술사업화 유관기관간간 기술사업화 정보교환 및 사업화 유망기술 기업 마케팅 등을 기본내용으로 한 시장지향적 녹색에너지 R&D 관리 시스템 구축방안을 제시하고자 한다.