• 한국산업정보학회논문지
• /
• 제19권3호
• /
• pp.9-15
• /
• 2014

In the ubiquitous computing environment, a ubiquitous vehicle will be a communication node in the vehicular network as well as the means of ground transportation. It will make humans and vehicles seamlessly and remotely connected. Especially, one of the prominent services in the ubiquitous vehicle is the vehicle remote operation. However, mutual-collaboration with the in-vehicle communication network, the vehicle-to-vehicle communication network and the vehicle-to-roadside communication network is required to provide vehicle remote operation services. In this paper, an Internet-based human-vehicle interfaces and a network architecture is presented to provide remote vehicle control and diagnosis services. The performance of the proposed system is evaluated through a design and implementation in terms of the round trip time taken to get a vehicle remote operation service.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.997-1002
• /
• 2008

This paper is mainly concerned with the development of a remotely operated vehicle for investigation of the coastal sea. For this, we have designed and constructed a vehicle entitled KMU-ROV(Korea Maritime University Remotely Operated Vehicle), for purpose of investigation mission under 50(m) of the sea surface. We have designed six independent waterproof actuators and the housing of the controller for underwater operation. For six degree-of-freedom motion, we have analyzed the dynamics of the KMU-ROV and have designed a new composition of six actuators including the driving system. For motion control, we have composed a concurrent velocity control algorithm for controlling the speed of all the actuating motors. The control system for the KMU-ROV is composed of a master DSP controller, DSP controller for the motor control and various sensors. We composed the PID control algorithm and a network system for controlling motors using the CAN communication. The performance of the KMU-ROV was presented by testing the developed control algorithm and control system under the water.

• 로봇학회논문지
• /
• 제15권1호
• /
• pp.39-47
• /
• 2020

This paper presents a control and operation system for a remotely operated vehicle (ROV). The ROV used in the study was equipped with a manipulator and is being developed for underwater exploration and autonomous underwater working. Precision position and attitude control ability is essential for underwater operation using a manipulator. For propulsion, the ROV is equipped with eight thrusters, the number of those are more than six degrees-of-freedom. Four of them are in charge of surge, sway, and yaw motion, and the other four are responsible for heave, roll, and pitch motion. Therefore, it is more efficient to integrate the management of the thrusters rather than control them individually. In this paper, a thrust allocation method for thruster management is presented, and the design of a feedback controller using sensor data is described. The software for the ROV operation consists of a robot operating system that can efficiently process data between multiple hardware platforms. Through experimental analysis, the validity of the control system performance was verified.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.102-109
• /
• 2011

This paper describes the implementation of a precise underwater navigation solution using a multiple sensor fusion technique based on USBL, GPS, DVL and AHRS measurements for the operation of a remotely operated mine disposal vehicle (MDV). The estimation of accurate 6DOF positions and attitudes is the key factor in executing dangerous and complicated missions. To implement the precise underwater navigation, two strategies are chosen in this paper. Firstly, the sensor frame alignment to the body frame is conducted to enhance the performance of a standalone dead-reckoning algorithm. Secondly, absolute position data measured by USBL is fused to prevent cumulative integration error. The heading alignment error is identified by comparing the measured absolute positions with the DR algorithm results. The performance of the developed approach is evaluated with the experimental data acquired by MDV in the South-sea trial.

• 항공우주정책ㆍ법학회지
• /
• 제35권3호
• /
• pp.65-93
• /
• 2020

정보통신기술 발전과 함께 4차 산업혁명 시대에 돌입하면서 신성장 산업으로 무인항공기 산업이 주목받기 시작했다. 소형 드론에서부터 대형 무인항공기까지 규모와 비행 공역의 범위도 다양해지면서 선진국(미국, 유럽)은 유인항공기와 무인항공기의 통합 운용에 대한 계획을 수립하고 있다. 또한, ICAO에서는 무인항공기의 국제기준 및 권고사항 수립을 하기 위해 관련 부속서 개정 작업을 수행하고 있다. 우리나라도 앞으로 도래할 유인항공기와 무인항공기의 통합 운영에 대비가 필요하여 이를 위해 무인항공기 안전운항에 대한 국내 제도 현황을 검토하고 정비해야 한다. 본 연구는 ICAO에서 논의하고 있는 원격조종항공기시스템(Remotely Piloted Aircraft System; RPAS) 관련 부속서의 개정사항들에 대해 분석하고 기존의 항공안전법과 비교하여 무인항공기 안전운항을 위한 항공안전법의 개정방향을 제시하였다.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.33-40
• /
• 2014

Due to its unmanned feature and some of being matured underwater technologies, UUV(Unmanned Undersea Vehicle) is increasingly considered as a utility player in today's battle-field. The operational benefit of submarine-based UUV operation could be enormous yet the integration challenges are significant, particularly for most of small conventionally-powered submarines. In this paper, we consider UUV operational methodology via the conventional submarine's torpedo tube. Two previous attempts having been done to retrieve the UUV through torpedo tube are reviewed, and their pros and cons are also analyzed. Then, an alternative option is proposed for UUV operation via torpedo tube. In addition, some of practical challenges are also discussed in the paper.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.349-355
• /
• 2015

Underwater robots generally show better performances for tasks than humans under certain underwater constraints such as. high pressure, limited light, etc. To properly diagnose in an underwater environment using remotely operated underwater vehicles, it is important to keep autonomously its own position and orientation in order to avoid additional control efforts. In this paper, we propose an efficient method to assist in the operation for the various disturbances of a remotely operated vehicle for the diagnosis of underwater structures. The conventional AHRS-based bearing estimation system did not work well due to incorrect measurements caused by the hard-iron effect when the robot is approaching a ferromagnetic structure. To overcome this drawback, we propose a sensor fusion algorithm with the camera and AHRS for estimating the pose of the ROV. However, the image information in the underwater environment is often unreliable and blurred by turbidity or suspended solids. Thus, we suggest an efficient method for fusing the vision sensor and the AHRS with a criterion which is the amount of blur in the image. To evaluate the amount of blur, we adopt two methods: one is the quantification of high frequency components using the power spectrum density analysis of 2D discrete Fourier transformed image, and the other is identifying the blur parameter based on cepstrum analysis. We evaluate the performance of the robustness of the visual odometry and blur estimation methods according to the change of light and distance. We verify that the blur estimation method based on cepstrum analysis shows a better performance through the experiments.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.653-660
• /
• 2022

Gravel scattering that is generated during operation of high-speed railway vehicle is cause to damage of vehicle such as windows, axle protector and so on. Especially, those are frequently occurred in winter season when snow ice is generated easily. Above all, damage of vehicle windows has not only caused maintenance cost but also increased psychological anxiety of passengers. Various methods such as heating system using copper wire, heating jacket and heating air are applied to remove snow ice generated on the under-body of vehicle. However, the methods require much run-time and man power which can be low effectiveness of work. Therefore, this paper shows that large-area heating system was developed based on heating coat in order to fundamentally prevent snow ice damage on high-speed railway vehicle in the winter season. This system gives users high convenience because that can remotely control the heating system using IoT-based wireless communication. For evaluating the applicability to railroad sites, a field test on an actual high-speed railroad operation was conducted by applying these techniques to the brake cylinder of a high-speed railroad vehicle. From the results, it evaluated how input voltage and electric power per unit area of the heating specimen influences exothermic performance to draw the permit power condition for icing. In the future, if the system developed in the study is applied at the railroad site, it may be used as a technique for preventing all types of damages occurring due to snow ice in winter.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.87-92
• /
• 2010

In this paper, we suggest a PLCS-based architecture and operation method for providing interoperability in SBA integrated collaborative environment. Specifically, the suggested architecture is based on the distributed collaborative environment which employes the PLCS application protocol and integrated repository for representing and sharing product data information between collaborators remotely located. As an example of data representation, a military vehicle system is considered and two kinds of information, including state and activity/process, are explained. We expect that the suggested architecture can be used as a reference model to develop an efficient SBA integrated collaborative environment.

• 한국음향학회지
• /
• 제38권2호
• /
• pp.161-167
• /
• 2019

본 논문은 트랙기반 중작업용 ROV(Remotely Operated underwater Vehicle)에 적용 가능한 어라운드 뷰 소나 및 굴착깊이 측정 소나의 성능 검증에 대한 내용을 다루고 있다. 현재 국산화 개발 중인 중작업용 ROV에 활용 가능한 어라운드 뷰 소나 및 굴착깊이 측정 소나를 장착하여 수조 및 실해역에서 성능 검증 실험을 수행하였다. 어라운드 뷰 소나의 경우 이미지 소나를 ROV 전후좌우 4방향에 장착하고, 굴착깊이 측정 소나는 멀티 빔 음향측심기(Multi Beam Echo Sounder, MBES) 기술로써 ROV 전방에 장착된다. 본 논문에서 개발한 소나를 장착하고 ROV를 실해역에 진수시켜 소나를 운용한 결과 소나 시스템들은 작업 중 발생하는 침전된 부유물이 발생하거나 탁도가 높은 해역에 영향을 거의 받지 않으며 어라운드 뷰 소나의 경우 ROV 전방 30 m 거리에 있는 암반지형, 자갈, 모래톱 등을 확인할 수 있었다. 그리고 굴착깊이 측정 소나의 경우 ROV가 굴착 작업을 수행 후 굴착 깊이를 측정 가능함을 확인하였다. 본 논문에서 제안한 어라운드 뷰 소나와 굴착깊이 측정 소나를 활용함으로써 작업효율성을 높일 수 있음을 입증하였다.