Browse > Article
http://dx.doi.org/10.12989/sss.2022.29.5.653

Development of exothermic system based on internet of things for preventing damages in winter season and evaluation of applicability to railway vehicles  

Kim, Heonyoung (Research Institute, PILETA Co., Ltd.)
Kang, Donghoon (Railroad Safety Research Division, Korea Railroad Research Institute)
Joo, Chulmin (Department of Mechanical Engineering, Yonsei University)
Publication Information
Smart Structures and Systems / v.29, no.5, 2022 , pp. 653-660 More about this Journal
Abstract
Gravel scattering that is generated during operation of high-speed railway vehicle is cause to damage of vehicle such as windows, axle protector and so on. Especially, those are frequently occurred in winter season when snow ice is generated easily. Above all, damage of vehicle windows has not only caused maintenance cost but also increased psychological anxiety of passengers. Various methods such as heating system using copper wire, heating jacket and heating air are applied to remove snow ice generated on the under-body of vehicle. However, the methods require much run-time and man power which can be low effectiveness of work. Therefore, this paper shows that large-area heating system was developed based on heating coat in order to fundamentally prevent snow ice damage on high-speed railway vehicle in the winter season. This system gives users high convenience because that can remotely control the heating system using IoT-based wireless communication. For evaluating the applicability to railroad sites, a field test on an actual high-speed railroad operation was conducted by applying these techniques to the brake cylinder of a high-speed railroad vehicle. From the results, it evaluated how input voltage and electric power per unit area of the heating specimen influences exothermic performance to draw the permit power condition for icing. In the future, if the system developed in the study is applied at the railroad site, it may be used as a technique for preventing all types of damages occurring due to snow ice in winter.
Keywords
brake cylinder; deicing technology; multi-layered paint-type exothermic coating; railway site; snow ice;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Nilsson, F., Moyassari, A., Bautista, A., Castro, A., Arbeloa, I., Jarn, M., Lundgren, U., Welinder, J. and Johansson, K. (2019), "Modelling anti-icing of railway overhead catenary wires by resistive heating", Int. J. Heat Mass Transf., 143, 118505. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118505.   DOI
2 Park, G.W., Lee, J.K. and Lee, H.K. (2019), "Ice melting capacity evaluation of applicable materials of de-icing fluid for high speed railway rolling stock", Appl. Chem. Eng., 30(3), 384-388. https://doi.org/10.14478/ace.2019.1026.   DOI
3 Russell, L., Goubran, R., Kwamena, F. and Knoefel, F. (2018), "Agile IoT for critical infrastructure resilience: Cross-modal sensing as part of a situational awareness approach", IEEE Internet Things J., 5(6), 4454-4465. https://doi.org/10.1109/JIOT.2018.2818113.   DOI
4 Wang, J., Zhang, J., Xie, F., Zhang, Y. and Gao, G. (2018), "A study of snow accumulating on the bogie and the effects of deflectors on the de-icing performance in the bogie region of a high-speed train", Cold Regions Sci. Technol., 148, 121-130. https://doi.org/10.1016/j.coldregions.2018.01.010.   DOI
5 Yoo, K.S., Jung, B.J., Jung, I.H. and Hyun, D.H. (2009), "The Researches in the properties of heating of high efficient nano surface heater", J. KSMTE, 2, 416-420.
6 Guo, L. and Li, Q.Z. (2013), "Research on on-line anti-icing technology for carenary along electrified railway", Adv. Mater. Res., 676, 321-324. https://doi.org/10.4028/www.scientific.net/AMR.676.321.   DOI
7 Li, K. and Wang, S. (2018), "A network accident causation model for monitoring railway safety", Saf. Sci., 109, 398-402. https://doi.org/10.1016/j.ssci.2018.06.008.   DOI
8 Bhattacharyya, A., Dervishi, E., Berry, B., Viswanathan, T., Bourdo, S., Kim, H., Sproles, R. and Hudson, M.K. (2007), "Energy efficient graphite-polyurethane electrically conductive coatings for thermally actuated smart materials", Smart Mater. Struct., 16(1), S187. https://doi.org/10.1088/0964-1726/16/1/S19.   DOI
9 Cho, H.S. (2016), "A study on the fabrication of surface heating panel using SiC ceramics", J. Korea Inst. Inform. Electron. Commun. Technol., 9(6), 604-608. https://doi.org/10.17661/jkiiect.2016.9.6.604.   DOI
10 Fatima, S., Haleem, A., Bahl, S., Javaid, M., Mahla, S.K. and Singh, S. (2021), "Exploring the significant applications of Internet of Things (IoT) with 3D printing using advanced materials in medical field", Mater. Today: Proceed., 45(6), 4844-4851. https://doi.org/10.1016/j.matpr.2021.01.305.   DOI
11 Redondo, O., Prolongo, S.G., Campo, M., Sbarufatti, C. and Giglio, M. (2018), "Anti-icing and de-icing coatings based Joule's heating of graphene nanoplatelets", Compos. Sci. Technol., 164, 65-73. https://doi.org/10.1016/j.compscitech.2018.05.031.   DOI
12 Yang, H., Bai, S., Guo, X. and Wang, H. (2019), "Robust and smooth UV-curable layer overcoated AgNW flexible transparent conductor for EMI shielding and film heater", Appl. Surf. Sci., 483, 888-894. https://doi.org/10.1016/j.apsusc.2019.04.034.   DOI
13 Kim, K.B., Park, Y., Choi, S.M., Lee, H. and Ryu, S.H. (2017), "Research on development of verification system for transmission data of railway safety detection device", J. Korean Soc. Urban Railway, 5(4), 975-984. https://doi.org/10.24284/JKOSUR.2017.12.5.4.975.   DOI
14 Ashima, R., Haleem, A., Bahl, S., Javaid, M., Mahla, S.K. and Singh, S. (2021), "Automation and manufacturing of smart materials in Additive Manufacturing technologies using Internet of Things towards the adoption of Industry 4.0", Mater. Today: Proceed., 45, 5081-5088. https://doi.org/10.1016/j.matpr.2021.01.583.   DOI
15 Han, K.I., Lee, A.H. and Cho, D.H. (2006), "A study on snow melting system for the anti-freezing testing road", J. Korea Soc. Power Syst. Eng., 10(1), 34-40.
16 Ikeya, Y., Orlu, R., Fukagata, K. and Alfredsson, P.H. (2017), "Towards a theoretical model of heat transfer for hot-wire anemometry close to solid walls", Int. J. Heat Fluid Flow, 68, 248-256. https://doi.org/10.1016/j.ijheatfluidflow.2017.09.002.   DOI
17 Jayathilake, D.S.Y., Sagu, J.S. and Wijayantha, K.G.U. (2019), "Transparent heater based on Al, Ga co-doped ZnO thin films", Mater. Lett., 237, 249-252. https://doi.org/10.1016/j.matlet.2018.11.092.   DOI
18 Karlsson, L., Lycksam, H., Ljung, A.L., Gren, P. and Lundstrom, T.S. (2019), "Experimental study of the internal flow in freezing water droplets on a cold surface", Exp. Fluid., 60(12), 182. https://doi.org/10.1007/s00348-019-2823-1.   DOI
19 Kim, H., Kang, D. and Choi, K. (2019), "Evaluation on heating performance and resistance characteristics of paint-type exothermic coating for application to railway vehicle", J. Korean Soc. Nondestr. Test., 39(5), 300-306. http://doi.org/10.7779/JKSNT.2019.39.5.300.   DOI
20 Kim, H., Kang, M., Hwang, M.Y., Kang, L.H., Joo, C. and Kang, D. (2021), "Experimental investigation of long-term effects on temperature reliability of exothermic coating for smart railway structures with self-heating surfaces", Smart Struct. Syst., 27(1), 53-60. https://doi.org/10.12989/sss.2021.27.1.053.   DOI
21 Lee, S.H., Kim, H.J., Kim, K.H., Park, Y.J. and Jang, S.P. (2013), "Effect of Insulation Coating on Start Time of Linear Region for Transient Hot-wire Method", Trans. Korean Soc. Mech. Eng. B, 37(12), 1147-1152. https://doi.org/10.3795/KSMEB.2013.37.12.1147.   DOI
22 Yang, K., Cho, K., Im, K. and Kim, S. (2016), "Temperature maintenance of an ITO nanoparticle film heater", J. IKEEE, 20(2), 171-173. https://doi.org/10.7471/ikeee.2016.20.2.171.   DOI
23 Arun, D.I., Chakravarthy, P., Girish, B.S., Kumar, K.S. and Santhosh, B. (2019), "Experimental and Monte Carlo simulation studies on percolation behaviour of a shape memory polyurethane carbon black nanocomposite", Smart Mater. Struct., 28(5), 055010. https://doi.org/10.1088/1361-665X/ab083b.   DOI
24 Kim, M.S. and Cho, K.H. (2017), "Proposal for specification of counter-measurement in frost-heave system in railway underpass box structures in North Korea considering climate condition", J. Korean Soc. Railway, 20(1), 99-110. https://doi.org/10.7782/JKSR.2017.20.1.99.   DOI