• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.169-181
• /
• 2010

This study aimed at simulating several responses to stresses caused by the ground water level variations around the K-1 oil stockpile. For this simulation, we considered the characteristic hydrogeological condition including the special occurrence of long and thick acidic dyke, which is regarded as the main geological structure dominating the ground water flow system at this study area. We activated twenty-four imaginary wells which are located in northern and southern area around central K-1 site. Each neighboring distance is altogether 300 m and whole distance between K-1 site and remote wells is 1,200 m. Through the modeling, we operated the long-term and continuous pumping tests and finally categorized five zones based on maximum pumping rates for the imaginary wells; zone I within 300 meter distance from K-1 site with a pumping rate of 50 $m^3/day$; zone II between 300 to 600 meter distance from K-1 site with a pumping rate of 75 $m^3/day$; zone III between 600 to 900 meter distance from K-1 site with 150 $m^3/day$; zone IV between 900 to 1,200 meter distance from K-1 site with 300 $m^3/day$; and zone V of acidic dyke area. At zone V, especially because of their possibility of high transmissivity for groundwater flow, it is necessary to control and restrict groundwater discharge.

• Journal of Intelligence and Information Systems
• /
• v.7 no.2
• /
• pp.1-17
• /
• 2001

This paper deals with an agent-based decision-supporting system for Taguchi experiment planning. Among the four major parts of Taguchi experiment, the planning phase includes the most important decision-making issues such as determination of experiment objectives, quality characteristics, and control factors. The planning phase, however, has not been paid proper attention by experiment designers. In this research, an agent-based decision-supporting system for Taguchi experiment planning has been developed to facilitate the planning tasks of experiment designer. The decision-supporting system is composed of two agent-based mechanisms. The first employs an Internet agent that collects the domain knowledge from knowledge providers who may be distributed in remote places. Another agent then visualizes the collected knowledge and reports it to the experiment designer. Engineers who would normally have difficulties in collaborating because of limitations on their time or because they are in different places can easily work together in the same experiment team and brainstorm to make good decisions. The second agent-based mechanism offers context-sensitive advice generated by another intelligent agent during the experiment planning process. it prevents the experiment designer from making improper decisions, which will increase the feasibility of the experiment and minimize the unnecessary expense of time and resources.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.601-610
• /
• 2020

Recently, damage caused by drought is becoming worse and worse due to the global climate change. To overcome these problems, movable-weir to control the water level has been installed instead of a fixed-weir made from concrete. On the other hand, it is difficult to operate an existing moveable-weir because of the high cost of facility management and manpower consumption. In addition, because most moveable-weirs are installed in power systems, the operating cost and the cost of connection for power systems increase when they are located in remote areas. Therefore, this paper proposes an optimal design algorithm and the evaluation algorithm of the SOC (state of charge) of a lithium-ion battery to replace an existing power supply with eco-friendly movable-power with a power supply system using PV modules and lithium-ion batteries. In addition, this study modeled a 50kW power supply system of a movable-weir using PSCAD/EMTDC S/W. The simulation results confirmed that the proposed algorithm has stable operation characteristics in an independent operation mode and interconnection operation mode and that there is the possibility of commercialization with a benefits evaluation of the eco-friendly power supply system of a movable-weir.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.126-137
• /
• 2016

Purpose: The overall objective of this study was to evaluate the vegetation fraction of soybeans, grown under different cropping conditions using an unmanned aerial vehicle (UAV) equipped with a red, green, and blue (RGB) camera. Methods: Test plots were prepared based on different cropping treatments, i.e., soybean single-cropping, with and without herbicide application and soybean and barley-cover cropping, with and without herbicide application. The UAV flights were manually controlled using a remote flight controller on the ground, with 2.4 GHz radio frequency communication. For image pre-processing, the acquired images were pre-treated and georeferenced using a fisheye distortion removal function, and ground control points were collected using Google Maps. Tarpaulin panels of different colors were used to calibrate the multi-temporal images by converting the RGB digital number values into the RGB reflectance spectrum, utilizing a linear regression method. Excess Green (ExG) vegetation indices for each of the test plots were compared with the M-statistic method in order to quantitatively evaluate the greenness of soybean fields under different cropping systems. Results: The reflectance calibration methods used in the study showed high coefficients of determination, ranging from 0.8 to 0.9, indicating the feasibility of a linear regression fitting method for monitoring multi-temporal RGB images of soybean fields. As expected, the ExG vegetation indices changed according to different soybean growth stages, showing clear differences among the test plots with different cropping treatments in the early season of < 60 days after sowing (DAS). With the M-statistic method, the test plots under different treatments could be discriminated in the early seasons of <41 DAS, showing a value of M > 1. Conclusion: Therefore, multi-temporal images obtained with an UAV and a RGB camera could be applied for quantifying overall vegetation fractions and crop growth status, and this information could contribute to determine proper treatments for the vegetation fraction.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1000-1007
• /
• 2011

Home Networking will be implementing the interactive network by home appliances over wireless/wireline network framwork. That is, Home appliances, which are being operated within home space configure the network through wireline/wireless network infrastructure for interworking and interacitive services by external internet access. Based on home networking, smarthome is home space where can use automatic telecommunication and interactive service by home appliances. we can call smarthome based on home networking infrastructure as the conceptual gateway for evolving future converged space like u-city. From simple home control service to home automation service over home networking infrastructure, smarthome service is evolving to up-to-date intelligent life environment in growth of IT technology. however, its service model development was based on supplier-centered based on advanced IT technology. because of this situation, smarthome service has not been acknowledged IT underprivileged people as well as IT early-adaptor. so, this research paper will consider and try to find out what will be the feasible factors to make the best service for IT underprivileged people.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.178-186
• /
• 2006

기상 수치예보는 (Numerical Weather Pridiction, NWP)는 바람, 기온, 등과 같은 기상요소의 시간 변화를 나타내는 물리방정식을 컴퓨터로 풀어 미래의 대기 상태를 예상하는 과학적인 방법으로 지구를 상세한 격자 2진부호(GRIdded Binary, 이하 GRIB)로 나누어 그 격자점에서의 값으로 대기 상태를 나타낸다. 지구 각지에서의 각종 관측자료를 기초로 격자점상의 현재값을 구한다. 대용량의 격자데이터는 이진형태이어서 컴퓨터, 서버 저장장치에서 동일형태 데이터로 존재한다. 우리나라 최초의 저궤도 관측 위성인 다목적 실용위성 KOMPSAT-1호(이하, 아리랑 위성1호)는 전자광학카메라(Electro Optical Camera, EOC)를 탑재하여 1999년 12월 21일에 발사된 이후 2006년 1월 현재까지 6여년간 성공적으로 임무를 수행, 7049여회의 영상을 획득하여 국가적으로 귀중한 자료로 활용하고 있다. 아리랑 위성1호는 일일 2-3회 EOC영상을 획득하고 있으며, 임무계획(Mission Planning)은 MP(Mission Planner)가 사용자로부터 자료를 수집하여 임무분석 및 계획 서브시스템(MAPS)에 의해 계산되어진 위성의 제도예측 데이터에 촬영하고자하는 목표지점 좌표를 입력하여 자동명령생성기(KSCG)에 의해 계산된 촬영 경사각도(Tilt)값을 위성에 전송하여 목표지역의 영상을 획득하게 된다. 위성영상 획득에 있어 고가의 위성을 운영하면서 기상의 상태를 정확히 예측하여 실패없이 유효한 영상을 획득하는 것이 무엇보다 중요하다. 본 논문에서는 효율적인 위성임무계획을 위한 기상수치예보 자료를 분석하여 앞으로 발사하게 될 고해상 카메라 탑제위성인 아리랑 위성2호와 3호에 적용하고자 한다. the sufficient excess reactivity to override this poisoning must be inserted, or its concentration is decreased sufficiently when its temporary shutdown is required. As ratter of fact, these have an important influence not only on reactor safety but also on economic aspect in operation. Considering these points in this study, the shutdown process was cptimized using the Pontryagin's maximum principle so that the shutdown mirth[d was improved as to restart the reactor to its fulpower at any time, but the xenon concentration did not excess the constrained allowable value during and after shutdown, at the same time all the control actions were completed within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.215-222
• /
• 2018

Recently, various motion beds have been actively developed and popularized. The motion bed has the functions of height adjustment, back plate rising, knee lifting, tilt function and left / right rotation, and the remote control can conveniently be used by the patient himself or the caregiver to move the patient. However, since the medical bed for use does not have a function of preventing pressure ulcers, exchanging sheets, and transferring patients, it is necessary to disperse body pressure by using a pressure ulcer prevention matrix to prevent pressure ulcers. However, it is accompanied by muscle strength and hard work, and nurses are avoiding difficult nursing care. In this study, we developed the first prototype in the world and confirmed that the system works normally with the goal of developing multifunctional beds that automatically perform the prevention of bed sores, the exchange of sheets and the transfer of patients in order to facilitate such nursing work. It is anticipated that the proposed multifunctional motorized bed in the future will be a model of a medical robot for smart healthcare.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.529-538
• /
• 2003

The speedy development of the world-wide web is rapidly growing the internet-based tools for the remote instruction. In interchanging and expressing the information of one another on the web, it is produced through the form of HTML(Hyoertext Text Markup Language). However, the structural disadvantage of the HTML is becoming to require a powerful XML(eXtensible Markup Language) which can store all the sphere of data, and transform them into another form. Nevertheless, because the powerful XML(eXtensible Markup Language). However necessary that XML standard should be applied appropriately. Because existing lecture data of cyber education sites cannot be shared, the users should passively use only the functions offered by cyber school. To solve the problem of this limit, in this study, the standardized data structure for XML is defined, and system model for processing between the server and the client is provided. By storing the lecture data of cyber education sites as XML on the web, stored data came to be reused without changing on any site. In the view of Users, they could used the Internet service with equipment that they want at any place and any time. To control any kinds of CK\LMS(Cyber Lecture Management System) for Administrator and Users, we offered a variety of Multimedia applications and an easy interface and built a new style of CLMS. Therefore, by strong and extracting the data related with the virtual education of the secondary school through the form of XML, for the effective interchange and sharing of the information, maximum utilization of the information can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.523-535
• /
• 2017

Local intelligent services aim at controlling local services such as cooling or lightening services in a certain local area, using Internet-of-Things (IoT) sensor data in the area. As the IoT paradigm has evolved, local intelligent services have gained increasing attention. However, most of the local intelligent service mechanism proposed so far do not directly take the users' presence and service preference information into account for controlling local services. This study proposes an individual presence-and-preference-based local service system (IPP-LISS). We present a intelligent service control algorithm and implement a prototype system of IPP-LISS. Typically, the intelligence part of IPP-LISS including the prediction models, is generated on remote server in the cloud because of their compute-intense aspect. However, this can cause huge data traffic between IoT devices and servers in the cloud. The emerging mobile edge computing technology will be a promising solution of this challenge of IPP-LISS. In this paper, we implement IPP-LISS in the cloud, and then, based on the implementation result, we discuss applying the mobile edge computing technology to the IPP-LISS application.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.1
• /
• pp.1-16
• /
• 2000

From 1998, Oriental Medical Physicians(OMP) is distributed in Public Health Sector. but long term plan for Oriental Medicine in Public Health is not existed. So, this study is designed for the activation of OMP Subjects in this study were comprised 3 groups of oriental medicine related persons, the group of which are Students of 11 Oriental Medical Schools, Oriental Medical Physicians in Public Health Sector, Specialist Croup of Oriental medicine Policy(total 1,458 persons). Data were collected from July 1st to November 30, 1999. Direct interview with key persons, systematic interview by using of interview protocol, e-mail and facsimile have been conducted. The results of survey were coded by Excel 5.0, and analysed with SAS 6.12 statistical package. Inter-group difference determined by T-test, and descriptive statistics have been examined. Major findings can be epitomized as follows. 1) OMP disposition to multifarious organizations and institutes such as Public Health Centers, Public Health Sub-centers, Public Hospitals, Private Hospitals in Remote-Vulnerable Area, Community Social Welfare Centers, Institutes for Heath Policy Research, etc, will promise an effective use of Oriental Medical Physician. 2) Average number of patients treated by OMP was 22.8, average budget for oriental medical department, in which OMP were affiliated, was 39.6 million Won per year. Direct cost per every patient visit was 7,210.9 Won, which is considered expensive for public health service. Therefore, development and transformation for Oriental Medical Service in Public Health Sector is desirable in economic and political aspects. 3) It is recommended that ${\ulcorner}Advisory\;Committee{\lrcorner},{\ulcorner}Planning\;Commission\;for\; Public\;Health\;in\;Oriental\;Medicine{\lrcorner}$ should be established for the activation and for the support of Oriental Medical Physician in Public Health Sector, 4) Most effective programmes for oriental public health doctor are health service programmes for the elderly, Home health visit, chronic degenerative disease control services(p<0.001). 5) Standard guideline for facilities and equipments of Oriental Medicine Department in Public Health Center is needed for optimal supply of resources and activation of public health activity.