• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.611-616
• /
• 1994

Most of Commercial Remote Center Compliance(RCC) devices have been designed using deforma ble structures. In this work, we propose another type of assembly devices which generate the compliance effec ts by attaching the compliances (or spring) at the prismatic joints of the griven mechainsm. First, the kinematic analysis for a parallel-type planar 3-degree-of-freedom mechanism is performed using modified transfer method of generalized coordinate. Then, compliance characteristics for the mechanism using prismatic joint compliances are investigated. In particular, when the system maintains its symmetric configuration, the mechanism is show n to have RCC points at the center of the workspace. Finally, sensitivity analysis around RCC points is perfor med.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.910-914
• /
• 2007

In this paper, an experimental study is performed to adjust position of compliance center of Elastomer Shear Pad Remote Center Compliance (ESP RCC) device, which is used on precise peg in hole process. In the study, variation of the lateral/axial stiffness of the ESP is proposed as a control parameter to adjust the position of compliance center of the ESP RCC. The variation of the stiffness of the ESP is achieved by controlling the shear stress of the ESP. To control the shear stress of the ESP, position of top side of the ESP is changed while remaining bottom side of the ESP is fixed on the RCC plate. To evaluate effect of the proposed idea, stiffness variations of the ESP on various shear stresses are measured, and variation of the compliance center is measured with the ESP RCC that can control the position of compliance center by using the shear stress. The measured data shows unique characteristics that have not been shown in other types of ESP VRCCs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04a
• /
• pp.395-400
• /
• 1994

Most of Commercial Remote Center Compliance(RCC) devices have been designed using deformable structures. In this work, we propose another type of assembly devices which generate the compliance effects by attaching the compliances (or spring) at the joints of the given mechainsm. The compliance models are derived for a serial-type, parallel-type, and hybrid-type mechanisms, respectively. In particular, a planar three-degree of freedom parallel structure is shown to have RCC points at the center of the workspace for its symmetric configuratings.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.531-534
• /
• 1996

In this work, we investigate the characteristics of output compliance matrix of a planar 3 degree-of-freedom parallel mechanism when joint compliances are attached to the mechanism redundantly. It is shown by simulation that by attaching redundant joint compliances symmetrically to the mechanism, the translational and rotational compliances can be arbitrarily modulated within some ranges. This property could be effectively used in the control of the compliance characteristics of actively adjustable RCC devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.718-721
• /
• 1996

In this work, an effective stiffness generated by internal loading for a planar 3 degrees of freedom RCC mechanism is investigated. For this purpose, the internal kinematic analysis and antagonistic stiffness modeling for this mechanism are performed. It is shown that the antagonistic stiffness could be effectively created at the center of the mechanism in its symmetric configuration.

• The Journal of Korea Robotics Society
• /
• v.2 no.2
• /
• pp.168-177
• /
• 2007

In a number of fields, robots are being used for two purposes: efficiency and safety. Most robots, however, have single-actuator mechanism for each joint, where the tasks are performed with high stiffness. High stiffness causes undesired problems to the environment and robots. This study proposes redundant actuator mechanism as an alternative idea to cope with these problems. In this paper, Double-Actuator Unit (DAU) is implemented at each joint for applications of multi-link manipulators. The DAU is composed of two motors: the positioning actuator and the stiffness modulator, which enables independent control of positioning and compliance. A three-link manipulator with DAUs enables adaptive control of RCC. By modulating the joint stiffness of the manipulator and controlling the position of RCC, we can significantly reduce contact force during assembly tasks and surgical procedures.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.731-736
• /
• 1989

RCC(Remote Center Compliance)[1][2] is a useful device for peg and hole insertion works. Two methods for smooth insertion of round peg and round hole are proposed. The idea of method 1 is to design the optimum position of the compliance center of RCC which is different from that of usual RCC in order to minimize the insertion force with the assumption of the known insertion angle. The idea of method 2 is to insert peg with rotation in order to decrease the friction coefficient between peg and hole. The two ideas are analyzed theoretically and are shown valid experimentally.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.704-708
• /
• 2005

In this paper, a simple idea is proposed to change the compliance center of the Remote Center Compliance (RCC) by adjusting the elasticity of the Elastomer Shear Pad (ESP). To vary the elasticity of the ESP, a hole is made in the ESP along its stiffness axis, and a stiffness adjusting rod (SAR) is inserted into the hole. By adjusting the insertion depth of the rod, lateral stiffness of the ESP can be varied, and the compliance center of the VRCC can be controlled accordingly. To verify the effectiveness of the proposed idea, a prototype VRCC is designed and, the position of the compliance center with various lengths of the inserted rod are measured.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.139-145
• /
• 1991

본 논문에서는 chamfer가 없는 경우에도 조립이 가능한 로봇 조립용 손목기구를 개발하였다. 손목기구에서는 chamfer있는 경우에 우수란 적응능력을 가지는 RCC(Remote Center Compliance) 구조가 이용되었으며 위치측정용 sensor와 공압 actuator를 이용하여 조립시 생기는 RCC 구조의 변형을 측정하여 이로부터 능동적으로 오차를 교정하도록 하였다. sensor signal로부터 적절한 오차교정방향을 찾아내는 algorithm 으로는 신경회로망을 이용하였으며 이 결과 손목기구의 비선형성에도 잘 적응함을 볼 수 있었다. 제작된 로봇 조립용 손목을 이용하여 chamferless part의 조립을 실험한 결과 clearance ratio가 0.02인 경우 eccentricity가 2mm 까지 오차교정이 가능함을 볼 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.36-43
• /
• 1992

In this paper, a robot assembly wrist, which is able to assemble chamferless parts, has been developed. The RCC (Remote Center Compliance) structure is used as a basic structure. 5 position sensors and 4 pneumatic actuators are installed additionally to measure the deformation of RCC structure and correct the errors actively. Due to the restricted direction of actuation, a decision rule which selects the suitable actuator according to the position sensor signals is needed. For this purpose, a neural network is used and it is experimentally shown that the nerual network overcomes system's nonlinearity. This paper presents fundamental experiment results for the insertion of parts with several clearance.