• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.187-190
• /
• 2005

In this study, the reliablility based design optimization is peformed for an aircraft wing. The flexiblility of the wing was assumed by considering the interaction modeled by static aeroelasticity between aerodynamic forces and the structure. For a multidisciplinary design optimization the results of aerodynamic analysis and structural analysis were included in the optimization formulation. The First Order Reliability Method(FORM) was employed to consider the uncertainty of the designed points.

• Journal of the Korean Data and Information Science Society
• /
• 제6권1호
• /
• pp.73-83
• /
• 1995

We construct the approximate bootstrap confidence intervals for reliability (R) when the distributions of strength and stress are both normal. Also we propose percentile, bias correct (BC), bias correct acceleration (BCa), and percentile-t intervals for R. We compare with the accuracy of the proposed bootstrap confidence intervals and classical confidence interval based on asymptotic normal distribution through Monte Carlo simulation. Results indicate that the confidence intervals by bootstrap method work better than classical confidence interval. In particular, confidence intervals by BC and BCa method work well for small sample and/or large value of true reliability.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.54-59
• /
• 2009

In the process to manufacture for metallic structures, control of welding deformation is one of an important problems connected with reliability of the manufactured structures so that welding deformation should be measured and controlled with quickly and actively. Also, welding parameters which have as lot of effects on welding deformation such as arc voltage, welding current and welding speed can also be controlled. The objectives for this study were to develop a simple 2-D FEM to calculate not only the transient thermal histories but also the sizes of fusion and heat-affected zone (HAZ) in multi pass arc welds including the butt and fillet weld type with dissimilar thickness, and to concentrate on a developed model for the finding the parameters of Godak's moving heat source model based on a GA. The developed model includes a GA program using MATLB and GA toolbox, and a batch mode thermal model using ANSYS software. Not only the thermal model was verified by comparison with Goldak's work but also the developed model was validated with molten zone section experimental data.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.265-276
• /
• 1998

A commercial nuclear power station contains at least two emergency diesel generators(EDG) to control the risk of severe core damage during station blackout accidnets. Therefore, thereliability of the EDG's to start and load-run on demand must be maintained at a sufficiently high level. Until now, a simple assessment of start and load-run success rates was used to calculate the EDG reliability. However, this method has been found to contain many defects. Recently, the work of Martz et al.(1996) proposed the use of the Bayes estimator to find EDG reliability. Shim(1996) proposed a confidence interval for the Bayes estimator, compare the above two methods. In this paper, we introduce the notion of "Composite Reliablility" to estimate the reliability of nuclear-power plant EDG, and using practical examples, illustrate which method is more a, pp.opriate in our situation.situation.

• 한국통신학회논문지
• /
• 제16권7호
• /
• pp.628-639
• /
• 1991

GaAs MESFET 모델의 정확한 매채변수 값을 구하기 위하여 바이어스 의존성을 바탕으로 3가지 바이어스 변화에 대한 S-,파라미터 측정만으로 모델 매개변수를 추출할 수 있는 새로운 계산 방법을 제시한다. Weighted Broyden update방법의 최적화 과정에서 얻어지는 오차 함수에 대한 매개 변수의 검토를 이용하여 전형 및 비전형 매개 변수의 유일해를 결정한다. 제안된 방법을 적용하기 위해 Marterka & Kacprzak 모델을 사용하였으며 추출한 매개변수 값의 정당성을 측정치와 비교함으로서 입증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.41-44
• /
• 1990

There is the need to balance safety, economy and serviceability in all phases of society proboems. This is especially true in structural code formulation, where a framework is established by which practicing structural enginers can be assured of designing structures that reasonably meet the above three objectives. The existeing design codes, which are generally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of loads and resistances and the basic reliability concepts. The purpose of the present study is therefore to develop the realistic reliablility-based design criteria to secure adequate safety and reliability, and to derive the models for partial and combined resistance factor formats.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.832-837
• /
• 2001

In this paper, we analyzed the characteristic of the broken section for bolts fastening the generator casing, and according to the frequency analysis, we grasped the characteristic of the excited force, traced the path of the exciting source so that we examined a factor of transient vibration of the generator casing. Even if it appears transient vibration again, we applied spring washer and more tensile bolt to the casing to minimize the fracture. By solving troubles of the generator rotor, we reduced the vibration amplitude to the normal condition. So we obtain much more the reliablility of the generator.

• 전자공학회논문지S
• /
• 제35S권12호
• /
• pp.69-76
• /
• 1998

본 논문에서는 ICP (Iterative Closest Point) 알고리즘을 이용한 영상등록에서의 회전 성분 신뢰도를 추정할 수 있는 행렬을 유도하 였다. ICP 알고리즘 결과의 신뢰도는 영상등록을 하려는 입력 물체의 모양에 따라 다르다. 보통 원통과 같은 어떤 축에 대한 회전체보 다는 더 복잡하고 두드러진 특징이 많은 물체일수록 신뢰도가 높은 결과를 얻게 된다. 본 논문에서는 ICP 알고리즘으로 구한 값의 신뢰도를 점으로 표현되는 입력물체에서의 각 점의 위치와 법선 벡터에 대한 식으로 나타내었다. 입력물체에 잡음이 들어갔을 때, 이로 인한 ICP 결과의 오차를 제시한 신뢰도를 이용해 추정하였다. 마지막으로 타원체 합성영상에 대한 신뢰도와 잡음이 들어갔을 때의 ICP 결과의 오차를 컴퓨터 모의실험으로 비교 분석하여 이론치와 부합되는 것을 보였다.

• 한국농공학회지
• /
• 제36권4호
• /
• pp.103-116
• /
• 1994

The objective of this study was to determine the criteria for density and moisture content measurements made with a nuclear density meter on common materials in the construction field. The study also sought to test a full-type nuclear density meter in controlling the density of overlay layers( 2.5~5.0cm). In order to determine the accuracy and reliablility of nuclear guage measurements made on construction materials, laboratory and field tests were conducted. Wooden blocks( 65 x 45 ${\times}$ 50 cm) and a special steel compactor( 4.7kg) were constructed in order to carry out tests which were conducted on three different materials; coarse gramed soil, fine grained soil, and AC material. Throughout all laboratory and field tests, the nuclear density and moisture content were determined using Humboldt 5OOLP nuclear gauge. The tests on subgrade material entailed obtaining density measurements by means of both the sand replacement method and the nuclear density meter. The results of the sand replacement method were then compared to the readings recorded bu the meter. As in the subgrade material tests, density measurements made during AC pavement tests were also determined using the unclear meter in addition to a second means; through the core method. The meter readings and core densties were compared as was done in the tests on subgrade materials. The correlation between the results of the sand replacement test( also, the core method) and meter readings on subgrade material was then determined. Sirnilarly, the observed results were then analyzed through linear regression. The tests to determine thin-lift density by means of a full-type nuclear density meter also conducted on the overlay layers( about 4. 8cm thickness) above AC pavements at road construction sities in Korea.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.45-51
• /
• 2019

현대 파일 시스템은 예기치 못한 시스템 크래시 또는 재난 상황에서도 데이터의 일관성 유지를 위해 저널링 메커니즘을 유지한다. 그러나 저널링은 I/O 처리율을 떨어뜨리는 문제가 있다. 이 성능 저하 문제는 데이터 버퍼와 메타데이터 버퍼간의 오더링 메커니즘과 2단계 버퍼쓰기에서 기인하는데. 특히, 만약 데이터 버퍼와 메타데이터 버퍼가 동시에 저널링이 되면, 2단계 쓰기 때문에 심각한 성능저하가 발생하며, 이는 I/O 성능과 시스템 신뢰도 간의 Trade-off 관계가 있음을 나타낸다. 본 논문은 RFJ라는 신뢰성 있는 고속 저널링 기법을 제안한다. 이 기법은 Ordering enforced writeback 저널링 모드와 selective journaling 메커니즘을 도입해서 높은 신뢰도와 동시에 고성능 I/O가 가능하게 한다. 본 논문에서 제안한 기법의 실험 결과 기존 Ext3 저널링 모드 대비 약 5배 이상 빠른 I/O 처리량을 지원하면서 동시에 Ext3 저널링과 동일한 수준의 신뢰성을 나타는 것을 확인 할 수 있었다.