• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.37-45
• /
• 2010

A system which needs timely accuracy has to design and to verify correctly about execution-time for reliability. Accordingly, it is necessary for timing analysis tools, and much previous research worked. In timing analysis tool, there are two methods. One is a static analysis, and the other is a measurement based analysis. A static analysis is able to spend time less than a measurement based analysis method, but has low reliability of analysis result caused by hard to estimate time of I/O caused by various hardware. A measurement based analysis can be close analysis to real result, but it is hard to adapt to actual application, and spend a lot of time to get result of analysis. As such, this paper present a software monitoring architecture to supply reliability of static analysis process. In a presented architecture, it can select target as needed measurement through static analysis, and reuse result of measurement exist. Therefore, The architecture can reduce overload of time and performance for measurement, and improve the reliability which is the worst problem of static analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.199-208
• /
• 1994

One of the main objectives of the study is to propose a practical but realistic limit state model considering combined effect of axial and bending load for reliability analysis and safety assessment of cable-stayed bridge under vehicle traffic loads. This paper is intended to propose a new approach for the evaluation of reserved load carrying capacity of cable-stayed bridge under vehicle traffic loads in terms of equivalent strength, which may be defined as a bridge strength corresponding to the reliability index of the bridge. This can be derived from an inverse process based on the concept of FOSM form of reliability index. AFOSM and IST methods are used for the reliability analysis of the proposed models. The proposed reliability model and methods are applied to the safety assessment of Jindo Bridge which is one of major two cable-stayed bridges in Korea.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.331-338
• /
• 2013

A new reliability calculation method is proposed based on design sensitivity analysis by the finite element method for nonlinear performance constraints in the optimal design of electromagnetic devices. In the proposed method, the reliability of a given design is calculated by using the Monte Carlo simulation (MCS) method after approximating a constraint function to a linear one in the confidence interval with the help of its sensitivity information. The validity and numerical efficiency of the proposed sensitivity-assisted MCS method are investigated by comparing its numerical results with those obtained by using the conventional MCS method and the first-order reliability method for analytic functions and the TEAM Workshop Problem 22.

• Journal of the Korean Society of Systems Engineering
• /
• v.4 no.1
• /
• pp.35-43
• /
• 2008

Generally, in analysis of reliability of Design and Development Phase, reliability of electrical components is analyzed based on standards such as MIL-HDBK-217F, Bellcore Issue 4,5,6 by analyzing stress of architectural side (Power, Voltage, Current and quality level of components) of weapon system and stress of operational side (operational environment, operational temperature, Operational Profile). But the reliability of mechanical components is analyzed based on the data book of failure history of mechanical parts called NPRD-95(Nonelectronic Parts Reliability Data-95) without any analysis of above stress. However, even if it's the same mechanical parts, it might have different failure rate(fatigue, wear, corrosion) during operation depending on how weary(stress : pressure, vibration, temperature during operation) the parts are. Therefore, analyzing reliability using just data book can cause big difference in reliability instead of analyzing based upon stressfulness that parts might have, operational concept, and other various factors. Thus, This paper will guide the way of predicting reliability by organizing ways of predicting reliability for system organization and adopt ing NSWC-98/LE1(Naval Surface Warfare Center-98/LE1) for mechanical components.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.105-112
• /
• 2016

An aircraft must be designed to minimize system failure rate for obtaining the aircraft safety, because the aircraft system failure causes a fatal accident. The safety of the aircraft system can be predicted by analyzing availability, reliability, and maintainability of the system. In this study, the reliability and the maintainability of the hydraulic system are analysed except the availability, and therefore the reliability and the maintainability analysis process and the results are presented for a helicopter hydraulic system. For prediction of the system reliability, the failure rate model presented in MIL-HDBK-217F is used, and MTBF is calculated by using the Part Stress Analysis Prediction and quality/temperature/environmental factors described in NPRD-95 and MIL-HDBK-338B. The maintainability is predicted by FMECA(Failure Mode, Effect & Criticality Analysis) based on MIL-STD-1629A.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.54-59
• /
• 2017

This paper presents an efficient finite analysis model and a simulation-based reliability analysis method for stowage device system failure of a container crane with respect to lateral load. A quasi-static analysis model is introduced to simulate the nonlinear resistance characteristics and failure of tie-down and stowage pin, which are the main structural stowage devices of a crane. As a reliability analysis method, a subset simulation method is applied considering the uncertainties of later load and mechanical characteristic parameters of stowage devices. An efficient Markov chain Monte Carlo (MCMC) method is applied to sample random variables. Analysis result shows that the proposed model is able to estimate the probability of failure of crane system effectively which cannot be calculated practically by crude Monte Carlo simulation method.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.525-534
• /
• 2015

A new structural dynamic fuzzy reliability analysis under stochastic loads which are applied several times is proposed in this paper. The fuzzy reliability prediction models based on time responses with and without strength degeneration are established using the stress-strength interference theory. The random loads are applied several times and fuzzy structural strength is analyzed. The efficiency of the proposed method is demonstrated numerically through an example. The results have shown that the proposed method is practicable, feasible and gives a reasonably accurate prediction. The analysis shows that the probabilistic reliability is a special case of fuzzy reliability and fuzzy reliability of structural strength without degeneration is also a special case of fuzzy reliability with structural strength degeneration.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.4
• /
• pp.510-519
• /
• 2015

Concerning the issue of high-dimensions, hybrid uncertainties of randomness and intervals including implicit and highly nonlinear limit state function, reliability analysis based on the hybrid uncertainty reliability mode combining with back propagation neural network (HU-BP neural network) is proposed in this paper. Random variables and interval variables are as input layer of the neural network, after the training and approximation of the neural network, the response variables are obtained through the output layer. Reliability index is calculated by solving the optimization model of the most probable point (MPP) searching in the limit state band. Two numerical cases are used to demonstrate the method proposed in this paper, and finally the method is employed to solving an engineering problem of the aerospace friction plate. For this high nonlinear, small failure probability problem with interval variables, this method could achieve a good analysis result.

• Computers and Concrete
• /
• v.29 no.1
• /
• pp.59-67
• /
• 2022

In this paper, a reliability-based approach has been implemented to develop seismic analytical fragility curves of highway bridges. A typical bridge class of the Central and South-eastern United States (CSUS) region was selected. Detailed finite element modelling is presented and Incremental Dynamic Analysis (IDA) is used to capture the behavior of the bridge from linear to nonlinear behavior. Bayesian linear regression method is used to define the demand model. A reliability approach is implemented to generate the analytical fragility curves and the proposed approach is compared with the conventional fragility analysis procedure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.921-927
• /
• 2012

Reliability-based design optimization (RBDO) can be used to determine the reliability of a system by means of probabilistic design criteria, i.e., the possibility of failure considering stochastic features of design variables and input parameters. To assure these criteria, various reliability analysis methods have been developed. Most of these methods assume that distribution functions are continuous. However, in real problems, because real data is often discrete in form, it is important to estimate the distributions for discrete information during reliability analysis. In this study, we employ the Akaike information criterion (AIC) method for reliability analysis to determine the best estimated distribution for discrete information and we suggest an RBDO method using AIC. Mathematical and engineering examples are illustrated to verify the proposed method.