• Geophysics and Geophysical Exploration
• /
• v.20 no.4
• /
• pp.232-240
• /
• 2017

Normal moveout correction is one of the main procedures of seismic reflection data processing and a crucial pre-processing step for AVO analysis. Unfortunately, stretch phenomenon, which is the intrinsic problem of NMO correction, degrades the quality of stack section and reliability of AVO analysis. Although muting is applied to resolve this problem, it makes far-offset traces more useful to develop an advanced NMO correction technique without stretch. In this paper, easy and detailed explanations are provided on the definition and methodology of NMO correction, and then the cause of stretch is explained with its characteristics. A graphical explanation for NMO correction is given for the intuitive understanding of stretch phenomenon. Additionally, the theoretical formulation is derived to quantitatively understand the NMO correction. Through explaining the muting process to remove NMO stretch, the limitations of conventional methods are investigated and the need for a new resolution comes to discussion. We describe a stretch-free NMO correction based on inverse theory among many different stretch-free NMO corrections. Finally, the stretch-free NMO correction is verified through synthetic example and real data.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.536-542
• /
• 2005

Recently European Council(EU) published the RoHS(restriction of the use of certain hazardous substances in electrical and electronic equipment) which is prohibit the use of Pb, Hg, Cd, $Cr^{+6}$, PBB or PBDE in the electrical and electronic equipments. So EU member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain 6 hazardous substances. The one of the most important in electronics manufacturing process is soldering. Soldering process use the chemical substances which are applied in fluxing and cleaning processes and it can generate the malfunction of electronics caused by corrosion in the fields conditions. Therefore this study researched on the polarization and Tafel properties of Sn40Pb and Sn3.0Ag0.5Cu(SAC) solder based on the electrochemical theory. We prepared SnPb specimens which was aged in $150^{\circ}C,\;180^{\circ}C$ for 15 minutes ana Sn3.0Ag0.5Cu specimens that was aged in $180^{\circ}C,\;220^{\circ}C$ for 10 minutes. Experimental polarization curves were measured in distilled ionized water and $3.5 wt\%$, 1 mole NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrode, respectively. To observe the electrochemical reaction, polarization test was conducted from -250 mV to +250 mV. From the polarization curves that were composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density(Icorr). In these results, corrosion rate for two specimen were compared Sn3.0Ag0.5Cu with SnPb solders

• Journal of muscle and joint health
• /
• v.7 no.2
• /
• pp.227-240
• /
• 2000

The purpose of this article was to identify trend in Arthritis research and to provide ba an approach of Arthritis research. The results of analysis of 69 Arthritis articles public year of between 1970-1999 found that most articles(27.6%, n=19) were published since few(10.1%, n=7) were before 1994. Vast majority of articles(79.8%, n=55) were printed in The Journal of Rheumatology Health, and 79.8%(n=55) of those were quantitative research, 8.7%(n=6) were qualitative research, and 14%(n=1) was methodological research. 29.0%(n=20) of quantitative research were carried in experimental design and over half(50.8%, n=35) in nonexperimental design. Having concerned the types of treatment(or intervention) used in experimental study, the most common treatment was 'exercise' (45.0%, n=9), and other less common were 'self-help education(15.0%, n=3), home care(10.0%, n=2) supportive care(10.0%, n=2), flexibility exercise combined with local heat therapy(5.0%, n=1), relaxation training(5.0%, n=1). Of the types of exercise, aquatic exercise was 30.0%(n=6). The effect of exercise on outcome variable was found to be most strong among the other types of treatment. 18 articles of nonexperimental research were correlational research. From the analysis of correlational research, 29 concepts were identified, and the relationship between depression and other variable were strongly reported. In descriptive studies, most commonly physiological variables were examined in 5 articles(29.5%). Only one study(5.9%) explored patient's perception of the causal factors and those causality. In qualitative researches, two study were carried out by the means of grounded theory. Majority of those subjects were RA patients, and the largest number of sample were 23 and the smallest was 1 In two studies, patient's perceived causality of RA was identified as a research problems, and an experience of ADL, fatigue Phenomenon, an experience of having a total knee replacement with osteoarthritis were each found in one study. Methodological research was carried out to test validity and reliability of the RA Fatigue Scale.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.59-67
• /
• 2015

Because reservoirs that supply irrigation water play an important role in water resource management, it is necessary to evaluate the vulnerability of this particular water supply resource. The purpose of this study is to provide water supply risk maps of agricultural reservoirs in South Korea using irrigation vulnerability model and cluster analysis. To quantify water supply risk, irrigation vulnerability indices are estimated to evaluate the performance of the water supply on the agricultural reservoir system using a probability theory and reliability analysis. First, the irrigation vulnerability probabilities of 1,346 reservoirs managed by Korea Rural Community Corporation (KRC) were analyzed using meteorological data on 54 meteorological stations over the past 30 years (1981-2010). Second, using the K-mean method of non-hierarchical cluster analysis and pre-simulation approach, cluster analysis was applied to classify into three groups for characterizing irrigation vulnerability in reservoirs. The morphology index, watershed area, irrigated area, and ratio between watershed and irrigated area are selected as the clustering analysis parameters. It is suggested that the water supply risk map be utilized as a basis for the establishment of risk management measures, and could provide effective information for a reasonable decision making on drought risk mitigation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.89-97
• /
• 2008

Chaotic behavior in motor systems is undesired dynamics in real-time implementation since the speed is oscillated in a wide range and the torque is changed by a random manner. We present an adaptive control approach for time-varying permanent-magnet synchronous motors (PMSM) with chaotic phenomenon. We consider that its parameters are changed randomly within certain bounds. First, a nonlinear system model of a PMSM is transformed to derive a nominal linear control strategy. Then, an auxiliary control for compensating real-time control error occurred by system perturbation due to parameter change is designed by using Lyapunov stability theory. Numerical simulation is accomplished for evaluating its efficiency and reliability comparing with the traditional control method. Additionally, we test our control method in real-time motor experiment including a PSoC based drive system to demonstrate its practical applicability.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2017

While a satellite is carried into orbit by a launch vehicle, it is exposed to the severe launch environment with random vibrations and shock. Accordingly, these vibration sources affect electronic equipment, particularly the printed circuit board (PCB) in the satellite. When the launch load impacts the PCB, it causes negative behavior. This causes perpendicular bending around the boundary of fixation points that finally leads to the failure of solder joints, lead wires, and PCB cracks. To overcome these issues, the electronic equipment design must meet reliability requirements. In this paper, Steinberg's method is used to derive allowable and maximum deflection to verify design from a life perspective concerning the control board of the Antenna Pointing Driver (APD) mounted on KOMPSAT-3.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.81-88
• /
• 2002

The root joint in the welding structures are apt to failure by the stress concentration which is occurred by the external force. Therefore, in the safety and reliability of structure, the complete penetration joint welding which are obtained by the groove welding with edge preparation is generally required. Nevertheless, fillet T-joint welding without edge preparation is often carried out in the fields to reduce working time and consumption of welding electrode, however, this process is likely to produce inadequate joint penetration such as root gap. In this paper, the focus of research is to investigate distribution of welding residual stresses in the plate(or flange) and web of T-joint weld, and especially in the near of root gap notch that is due to incomplete joint penetration. For the analysis, we have chosen model of T-joint weld in the cases of single and multi-pass welding with submerged arc welding and analyzed model by using finite element programs considering the heat conduction and thermal elasto-plastic theory.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.19-26
• /
• 2020

Flexible displays have been evolved into curved, foldable, and rollable as the degree of bending increases. Due to the presence of brittle electrodes (e.g. indium-tin oxide (ITO)) that easily cracked and delaminated under severe bending deformation, lowering mechanical stress of the electrodes has been critical issue. Because of this, mechanical stress of brittle electrode in flexible displays has been analyzed mostly in terms of bending radius. On the other hand, in order to make rollable display, various mechanical components such as roller and spring are needed to roll-up or extend the screen for the rollable display apparatus. By these mechanical components, brittle electrode in the rollable display is subjected to the excessive tensile stress due to the retracting force as well as the bending stress by the roller. In this study, mechanical deformation of rollable OLED display was modeled considering boundary conditions of the apparatus. An analytical modeling based on the classical beam theory was introduced in order to investigate the mechanical behavior of the rollable display. In addition, finite element analysis (FEA) was used to analyze the effect of mechanical components in the apparatus on the brittle electrode. Furthermore, a strategy for improving the mechanical reliability of the rollable display was suggested through controlling the stiffness of adhesives in the display panel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.380-386
• /
• 2006

Electric fuel sender fur the vehicle fuel gauge system was designed and fabricated based on the CPW(Co-Planer Waveguide) transmission line theory. It is applied on this system that characteristic impedance of RF transmission line can be varied by the surrounded material of the line. By the characteristic impedance owing the level of gasoline or diesel fuel in vehicle fuel tank, CPW line has corresponding reflected signal as much as changed impedance. Detected signal is amplified, and delivered to fuel indicator into cluster unit on dash board. Conventional floating mechanical buoy level gauge has several defects as low reliability and high break down rate by mechanical operation, and has not good linearity for the fuel level difference. CPW line with electric circuits are constructed on 1.6 mm thickness epoxy substrate, and measurement shows that this system has more accurate level and better linearity than conventional mechanical system. New electric fuel sender which has good productivity with long lifetime and low-in-cost by the SMT chip assembling could be replaced this system with conventional floating buoy system.

• Human Ecology Research
• /
• v.54 no.3
• /
• pp.251-262
• /
• 2016

This study analyzes the relation of the consumption values and ethical fashion consumption behavior as well as other influential factors between Korean and German ethical consumers based on the 'Modified Theory of Planned Behavior.' A survey was conducted on female consumers in their 20s and 30s, who experienced ethical fashion consumption in Seoul and Berlin. A factor analysis, reliability analysis, F -test and multiple regression analysis were performed for model verification. The research results indicated that emotional value (in case of Korea) and functional value out of consumption values (in case of Germany) have significant effects in regards to the influence of consumption values on ethical self-identity. The effects of ethical self-identity on ethical fashion consumption behavior indicated that Korean ethical self-identity influenced the ethical fashion consumption behavior of moderating and simplicity and eco-friendly certification versus local consumption as well as above factors (in case of Germany) explained by ethical self-identity. Both variables had a negative moderating effect in Korea in regards to the moderating effects of social comparison and materialism in the relations of ethical self-identity and ethical fashion consumption behavior; however, only materialism was an influential factor in Germany. The results of the research variables by individualism/collectivism indicated that the horizontal-collectivism group showed the highest ethical self-identity along with the lowest materialism tendency that had a high point of consumption behavior towards local consumption. However, the vertical-individualism group was outstanding. The consumption behavior aimed at moderating and simplicity.