International Journal of Naval Architecture and Ocean Engineering
/
v.10
no.2
/
pp.129-140
/
2018
A residual stress generated in the steel structure is broadly categorized into initial residual stress during manufacturing steel material, welding residual stress caused by welding, and heat treatment residual stress by heat treatment. Initial residual stresses induced during the manufacturing process is combined with welding residual stress or heat treatment residual stress, and remained as a final residual stress. Because such final residual stress affects the safety and strength of the structure, it is of utmost importance to measure or predict the magnitude of residual stress, and to apply this point on the design of the structure. In this study, the initial residual stress of steel structures having thicknesses of 25 mm and 70 mm during manufacturing was measured in order to investigate initial residual stress (hereinafter, referred to as initial stress). In addition, thermal elastic plastic FEM analysis was performed with this initial condition, and the effect of initial stress on the welding residual stress was investigated. Further, the reliability of the FE analysis result, considering the initial stress and welding residual stress for the steel structures having two thicknesses, was validated by comparing it with the measured results. In the vicinity of the weld joint, the initial stress is released and finally controlled by the weld residual stress. On the other hand, the farther away from the weld joint, the greater the influence of the initial stress. The range in which the initial stress affects the weld residual stress was not changed by the initial stress. However, in the region where the initial stress occurs in the compressive stress, the magnitude of the weld residual compressive stress varies with the compression or tension of the initial stress. The effect of initial stress on the maximum compression residual stress was far larger when initial stress was considered in case of a thickness of 25 mm with a value of 180 MPa, while in case of thickness at 70 mm, it was 200 MPa. The increase in compressive residual stress is almost the same as the initial stress. However, if initial stress was tensile, there was no significant change in the maximum compression residual stress.
Objective: This study aims to assess the following issues - acquisition level in terms of the information on frequently used drugs of youth, access paths for the information, actual status of the use of drugs frequently used by youth, types of the used drugs, drug abuse among youth, and the consequent drawbacks. This study also takes aims at suggestion of correct role of pharmacists in consideration of drug abuse among youth. Methods: During the period from August 1, 2011 to October 31, 2012, a research design and a question development have been conducted. To the students of the schools that were randomly selected (elementary school's N=99, middle school's N=106, high school's N=115 and university's N=115), it was asked to complete given questionnaire from August 1, 2012 to August 31, 2012. During the period from September 1, 2012 to October 30, 2012, the questionnaires were collected back and the analysis and evaluation of them were carried out. Results: Drugs known to the respondents were a total of 115 different medicines and most of the drugs belonged to over-the-counter drugs. The most well known drug was pain reliever and the second most familiar drug was wound ointment. Most of the respondents found the drugs through direct use and advertisement. In everyday life, more than half of the respondents were using over-the-counter drugs as well as health supplements. The most commonly used drug was analgesic drug. It was showed that the respondents also frequently used the drugs for improving their grades and appearances. It was shown that among the cases of drug use, there were also the cases of misuse and abuse of drugs for the respondents or people around them. Reliability of pharmacists was shown to be high and many students were also satisfied with the pharmacists' guidance for medication. Conclusion: Currently many students are using different kinds of drug in daily life, and there is a possibility that the risk of misuse and abuse of drugs will be increased. Those age groups can easily engage in bad habit of drug use. Thus, promotion on accurate drug information has to be strengthened, and pharmacists are required to conduct correct guidance for drug user's medication in terms of use amount, usage, interactions among different drugs, and potential risks.
Journal of the Korean Applied Science and Technology
/
v.38
no.4
/
pp.986-993
/
2021
This study was aimed to investigate the improvement effects of kelp extract on the damaged hair by manufacturing hair quality improving formulation adding kelp extract and applying that in the damaged hair. With respect to the study materials, the formulation was manufactured with different strengths of kelp extract including 0, 2, 4, and 6 grams, adding perm base material. The manufactured formulation was applied to the decolored sample hair of Level 8 and its effects were measured and compared before and after its application. Tensile strength, absorbance using methylene blue, and gloss were measured as the tools to show the improvement effects of hair quality. To check the reliability of the results, statistical analysis was performed. Tensile strength showed to be increased in the Level 8 samples applied by the formulations containing 4- and 6-gram strength. Absorbance using methylene blue showed to be decreased in all the samples after the application, based on the absorbance results before and after the application. No difference was found in all the samples on the gloss. In conclusion, this study revealed that kelp extract could improve the damaged hair. Further studies are required to check the improvement effects on the damaged hair with multiple types of extracts and study methods.
Kim, Ju-young;Lee, Dong-Min;Lee, Byoung-Gil;Gil, Gi-Nam;Kim, Kyung-Nam;Na, Jong-Whoa
Journal of Aerospace System Engineering
/
v.15
no.5
/
pp.24-32
/
2021
Personal Air Vehicle (PAV), Cargo UAS (Cargo UAS), and existing manned and unmanned aircraft are key vehicles for urban air mobility (UAM), and should demonstrate compatibility for the design of aircraft systems. The safety assessment required by for certification to ensure safety and reliability should be systematically performed throughout the entire cycle from the beginning of the aircraft development process. However, with the increasing complexity of safety critical aviation systems and the application of state-of-the-art systems, conventional experience-based and procedural-based safety evaluation methods make ir difficult to objectively assess safety requirements and system safety. Therefore, Model-Based Safety Assessment (MBSA) using modeling and simulation techniques is actively being studied at domestic and foreign countries to address these problems. In this paper, we propose a Model-Based Safety Evaluation framework utilizing modeling and simulation-based integrated flight simulators. Our case studies on the Traffic Collision Availability System (TCAS) and Wheel Brake System (WBS) confirmed that they are practical for future safety assessments.
This study verified what differences in screen golf content characteristics, intention to reuse, customer satisfaction and economic value experienced by consumers according to the image feeling, expression method, and image color provided by screen golf graphic content. In addition, the purpose of this study was to analyze what kind of influence the content characteristics of screen golf have on the economic value and what kind of influence the intention to reuse and customer satisfaction have in this process. From September 1, 2021 to September 30, 2021, a survey of 225 copies of consumers using the screen golf course was conducted. For data processing, frequency analysis, factor analysis, reliability analysis, cluster analysis, chi-square analysis and 3-step mediated regression analysis were performed. The research results are as follows. First, the preferred image feeling showed a high level of clean and sophisticated feeling and the preferred expression method showed a high realistic image. In addition, the preferred image color showed a high level of green color. Second, there were differences in competitiveness, ease of use, sense of solidarity and realism according to the degree of consideration of graphic content and differences in consumer's intention to reuse, customer satisfaction, and economic value. Third, in the relationship between screen golf content characteristics and economic value, customer satisfaction and re-use intention had a mediating effect. Through this study, by providing basic data to derive the graphic design model of screen golf, the operating entity suggested a way to improve economic benefits and tried to contribute to the growth of the screen golf industry.
Aithala, Janardhana P.;Kumar, Suraj;Aithal, Shodhan;Kotian, Shashidhar M.
Asian Spine Journal
/
v.12
no.6
/
pp.1106-1116
/
2018
Study Design: Prospective observational study. Purpose: To evaluate the disability domains relevant to Indian patients with low backache and propose a modified disability questionnaire for such patients. Overview of Literature: The Oswestry Disability Index (ODI) is a self-reported measurement tool that measures both pain and functional status and is used for evaluating disability caused by lower backache. Although ODI remains a good tool for disability assessment, from the Indian perspective questions related to weight lifting and sexual activity of ODI are questioned in some of the earlier studies. Activities of daily living in Indian patients vary substantially from those in other populations and include activities like bending forwards, sitting in floor and squatting which are not represented in the ODI. Methods: In this prospective observational study, a seven-step approach was used for the development of a questionnaire. Thirty patients were interviewed to identify the most challenging issue they faced while performing their daily activities (by free listing) and understand how important the questionnaire items were in terms of the standard ODI. Thus, a comprehensive disability questionnaire comprising 14 questions was developed and administered to 88 patients. Both qualitative (interviews) and quantitative methods (to establish the validity, reliability, and correlation with the Visual Analog Scale [VAS] and Rolland Morris disability questionnaire) were used to identify the 10 questions that best addressed the disability domains relevant to Indian patients. Results: According to free listing, four new questions pertaining to bending forward, sitting on the floor, walking on uneven surfaces, and work-related disabilities were included. In the second phase, wherein the questionnaire with 14 items was used, 56.8% patients did not answer the questions related to sexual activity, whereas 23.8% did not answer those related to walking on uneven surfaces. The modified questionnaire demonstrated good internal consistency (Cronbach's alpha=0.892) and correlation with the Rolland Morris questionnaire (Cronbach's alpha=0.850, p>0.05), as well as with the VAS score for disability (Cronbach's alpha=0.712, p>0.05) and pain (Cronbach's alpha=0.625, p>0.05). Conclusions: A modified disability questionnaire that was designed by adding two questions related to bending forward and work status and removing questions related to sexual activity and weight lifting or traveling (depending on the occupation) can help evaluate disability caused by back pain in Indian population.
Teacher's gaze empathy for students in science class is considered to be effective in enhancing the learning effect. Thus, studies on gaze empathy have been conducted, but most of the studies are just to reveal the characteristics of gaze. Therefore, it is necessary to deal with a research to raise the level of science teacher's gaze empathy. The purpose of this study is to develop an instruction consulting strategy based on eye tracking for improving science teachers' gaze empathy. In this study, we selected and analyzed relevant literature on teacher's gaze empathy. We also designed a consulting strategy and then revised the design through expert reviews on validity and reliability. The developed consulting strategy was aimed to improve science teacher's gaze empathy and set quantitative goal based on eye tracking. The consulting strategy consisted of six steps: preparation for consulting, measurement and analysis of teacher's gaze empathy, instruction and feedback of gaze empathy, training for improving gaze empathy, evaluation of consulting result, and completion of the consulting. In addition, the consultation was completed or repeated again through the measurement and evaluation of gaze empathy using eye tracking. The developed consulting strategy has a value in that it provides an alternative with quantitative diagnosis and prescription for improving gaze empathy. The strategy can contribute to enhance teacher professional competency through the analysis of teaching behavior.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.18
no.2
/
pp.129-143
/
2019
As the importance of autonomous vehicle safety is emphasized, the application of ISO-26262, a development verification guideline for improving safety and reliability, and the safety verification of autonomous vehicles are becoming increasingly important, in particular, SAE standard level 3 or higher level autonomous vehicles detect and decision the surrounding environment instead of the human driver. Therefore, if there is and failure or malfunction in the autonomous driving function, safety may be seriously affected. So autonomous vehicles, it is essential to apply and verity the safety concept against failure and malfunctions. In this study, we study the fault injection scenarios for safety evaluation and verification of autonomous vehicles using ISO-26262 part3 process and STPA were studied and safety measures for safety concept design were studied through simulation bases fault injection test.
Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
/
v.17
no.3
/
pp.329-338
/
2019
Suction of unsaturated bentonite buffers is a very important input parameter for hydro-mechanical performance assessment and design of an engineered barrier system. This study analyzed suction measurement techniques and constitutive models of unsaturated porous media reported in the literature, and suggested suction measurement techniques and constitutive models suitable for bentonite buffer in an HLW repository. The literature review showed the suction of bentonite buffer to be much higher than that of soil, as measured by total suction including matric suction and osmotic suction. The measurement methods (RH-Cell, RH-Cell/Sensor) using a relative humidity sensor were suitable for suction measurement of the bentonite buffer; the RH-Cell /Sensor method was more preferred in consideration of the temperature change due to radioactive decay heat and measurement time. Various water retention models of bentonite buffers have been proposed through experiments, but the van Genuchten model is mainly used as a constitutive model of hydro-mechanical performance assessment of unsaturated buffers. The water characteristic curve of bentonite buffers showed different tendencies according to bentonite type, dry density, temperature, salinity, sample state and hysteresis. Selection of water retention models and determination of model input parameters should consider the effects of these controlling factors so as to improve overall reliability.
Journal of the Korean Society for information Management
/
v.36
no.1
/
pp.247-267
/
2019
There has been low use of local information services that public libraries provide, and most of those services are limited only through in-house reading or checkout. Motivated by these issues, the study has developed a mobile application (app, hereafter) entitled as LibPass (a combination of Library and Pass) to propose new local information services that reflect the information needs of users. Regarding the design of LibPass, contents of LibPass are composed of the characteristics of local resources so that users can easily search for information about local culture and tour resources through mobile app. That is, it aims to provide efficient information services on local resources by providing information on accommodations, outdoor programs, and specialized libraries, as well as introducing tour resources. Above all, the services are provided with a single card issued by the National Library of Korea and is convenient to use anywhere in the country. It not only secures reliability and currency by utilizing various contents developed by public institutions, but also provides functions to facilitate specialized services for the local information of libraries. Based on the previous research, the present study derives the factors of quality evaluation of mobile tour information services; it constructs objects of LibPass application by analyzing existing applications and develops the prototype based on logical entity relationship model. This model can contribute to the increased use of local information services and, promotes the public's positive perception of the libraries through user-friendly applications.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.