• 한국산업융합학회 논문집
• /
• 제13권4호
• /
• pp.211-217
• /
• 2010

As the vehicle components are various, we confront unexpected problems in the development and application of them. also warranty expenses occur in the result of unconfirmed warranty.in this paper, to solve the problems of disconnection of damper Strut cable, we applied the optimum conditions through taguchi method for improvement of durability. and we made standard of reliability by weibull analysis of the field data. we acquired reliability standard by correlation with lab data and confirmed improved components satisfying the target of reliability. The analysis of reliability by field data is very useful and we need to apply this method to other components, the correlation between field data and Lab Test has influence on satisfying the target of reliability.this method would be utilized for current mass production components and upcoming developed components. the reliability of durability should be continuously used in the basis of primary technique in cope with competitive automotive companies.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.982-989
• /
• 2010

This paper shows accuracy comparison results of reliability estimation methods for one-shot systems such as ammunitions. Quantal-response data, following a binomial distribution at each sampling time, characterizes lifetimes of one-shot systems. Various quantal-response data of different sample sizes are simulated using lifetime data randomly sampled from assumed weibull distributions with different shape parameters but the identical scale parameter in this paper. Then, reliability estimation methods in open literature are applied to the simulated quantal-response data to estimate true reliability over time. Rankings in estimation accuracy for different sample sizes are determined using t-test of SSE. Furthermore, MSE at each time, including both bias and variance of estimated reliability metrics for each method are analyzed to investigate how much both bias and variance contribute the SSE. From the MSE analysis, MSE provides reliability estimation trend for each method. Parametric estimation method provides more accurate reliability estimation results than the other methods for most of sample sizes.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.313-318
• /
• 2005

Estimating the reliability of protein-protein interaction data sets obtained by high-throughput technologies such as yeast two-hybrid assays and mass spectrometry is of great importance. We develop a maximum likelihood estimation method that uses both protein localization and gene expression data to estimate the reliability of protein interaction data sets. By integrating protein localization data and gene expression data, we can obtain more accurate estimates of the reliability of various interaction data sets. We apply the method to protein physical interaction data sets and protein complex data sets. The reliability of the yeast two-hybrid interactions by Ito et al. (2001) is 27%, and that by Uetz et at.(2000) is 68%. The reliability of the protein complex data sets using tandem affinity purification-mass spec-trometry (TAP) by Gavin et at. (2002) is 45%, and that using high-throughput mass spectrometric protein complex identification (HMS-PCI) by Ho et al. (2002) is 20%. The method is general and can be applied to analyze any protein interaction data sets.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.791-799
• /
• 2005

We consider two components parallel system in which the lifetimes have the bivariate Pareto model with bivariate random censored data. We assume that bivariate Pareto model is affected by common stress which is independent of the lifetimes of the components. We obtain estimators for the system reliability based on likelihood function and relative frequency. Also we construct approximated confidence intervals for the reliability based on maximum likelihood estimator and relative frequency estimator, respectively. Finally we present a numerical study.

• Journal of the Korean Data and Information Science Society
• /
• 제14권3호
• /
• pp.631-639
• /
• 2003

Bayes estimates of reliability for the stress-strength system are obtained with respect to LINEX loss function. A reference prior distribution of the reliability is derived and Bayes estimates of the reliability are also obtained. These Bayes estimates are compared with corresponding estimates under squared-error loss function.

• 품질경영학회지
• /
• 제27권4호
• /
• pp.241-255
• /
• 1999

This paper concerns Reliability Analysis System(RAS) developed by LG Electronics, Inc. for collecting, classifying, and analyzing field failure data. To develop this system, a database for the management of field failure data was built and several functions were included to analyze and assess the product reliability. Nonparametric estimation and cumulative hazard plotting techniques were applied to estimate the reliability for a specific period. This system serves not only engineers in charge of quality but also designers who wish to monitor the reliability of their own products.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권1호
• /
• pp.1-13
• /
• 2008

A methodology for collection and analysis of automotive field reliability data is presented. Automotive warranty system usually covers a pre-determined period of time and/or mileage accumulation. Therefore mileage information for the vehicles that have not experienced any failure or problems during the warranty period is not available. In this paper, a reliability analysis method using the estimated mileage distribution from an additional survey for vehicles that have not any record during the warranty period is proposed. Methods of reliability analysis using the warranty information collected under the EU and US warranty policies are also provided.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제3권2호
• /
• pp.93-101
• /
• 2003

Life time data analysis requires some time-to-failure data to an extent. Some life tests result in few or no failure. In such cases, it is difficult to access reliability with traditional life tests that record only time to failure. Furthermore, with short product development time, reliability tests must be conducted with severe time constraints. For some devices, it is possible to obtain degradation measurements over time, and these measurements may contain useful information about product reliability. This article describes degradation reliability analysis methods to do inferences and predictions about a failure-time distribution by using software. In addition, the possibility of extension to CBM (Condition Based Maintenance) is suggested as an example of applied degradation data analysis.

• 경영과학
• /
• 제11권2호
• /
• pp.1-27
• /
• 1994

A reliability data processing MPRDP (Multi-Purpose Reliability Data Processor) has been developed in FORTRAN language since Jan. 1992 at KAERI (Korean Atomic Energy Research Institute). The purpose of the research is to construct a reliability database(plant-specific as well as generic) by processing various kinds of reliability data in most objective and systematic fashion. To account for generic estimates in various compendia as well as generic plants' operating experience, we developed a 'three-stage' Bayesian procedure[1] by logically combining the 'two-stage' procedure[2] and the idea for processing generic estimates[3]. The first stage manipulates generic plant data to determine a set of estimates for generic parameters,e.g. the mean and the error factor, which accordingly defines a generic failure rate distribution. Then the second stage combines these estimates with the other ones proposed by various generic compendia (we call these generic book type data). This stage adopts another Bayesian procedure to determine the final generic failure rate distribution which is to be used as a priori distribution in the third stage. Then the third stage updates the generic distribution by plant-specific data resulting in a posterior failure rate distribution. Both running failure and demand failure data can be handled in this code. In accordance with the growing needs for a consistent and well-structured reliability database, we constructed a generic reliability database by the MPRDP code[4]. About 30 generic data sources were reviewed and available data were collected and screened from them. We processed reliability data for about 100 safety related components frequently modeled in PSA. The underlying distribution for the failure rate was assumed to be lognormal or gamma, according to the PSA convention. The dependencies among the generic sources were not considered at this time. This problem will be approached in further study.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.129-136
• /
• 2014

Reliability test is focusing to detect the unexpected reliability failure and solve them for the high quality of products. The test data should be used to assess and project the current level of interesting product reliability and so it is very important to have the accurately assessing methodology with test data. There are two type of trend for test data as constant and changing one during testing and this paper shows the difference in the assessing results of these two cases. There is less information how to define the existence of reliability growth rate changing and calculate the parameters of the reliability growth models to make an accurate assessment with such condition, so i established the process and mathematical model to calculate the parameters at such condition to make reliability growth curve with high Goodness of Fit. I validated the new method with the data made from Monte Carlo Simulation and case from Demko (1993). Even the assessed result with the new methodology may be different with the case by case because of very diversity in test condition and testing product quality, but the process and method founded in this research can be applied to any case using Duane and AMSAA model for their test data assessment. I also present the evaluation method to see the effectiveness with new one which is a conventional knowledge and not popular to use, so it is possible to compare the results with the newly presented and conventional method for better business decision.