• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.201-207
• /
• 2010

In this study, the SIP (Soil-cement Injected precast Pile) method among the Low-vibration & Low-noise pile driving methods was decided into study compensation. Ground vibrations by the SIP methods step by step divide and were analyzed. Quantitative response values and ground vibration equations with reliability were presented from findings of this study. Also, vibration responses that are occurred by the SIP method of construction were compared as quantitative with vibration responses by general method of construction that are presented in existent study. Ground vibration values by the SIP method correspond to level of 17 ~ 57% of values that are assumed by the Attewell & Famer's equation, respectively, and these result compares in reliability 50% and separated distance 10 ~ 50 m. Also, those values were analyzed that correspond to level of 14 ~ 96% of ground vibration values by the Prof. Park's equation, respectively. Construction limit extents, separation distances from vibration occurs position, were presented that can satisfy domestic criteria for vibration control for the SIP methods. Those presented in this paper were divided newly according to reliability.

• 한국가스학회지
• /
• 제1권1호
• /
• pp.41-48
• /
• 1997

가스물성의 계산방법으로 상태방정식이 널리 사용되고 있으나 상태방정식의 종류에 따라서 물성예측에 서로 다른 차이를 보이고 있다. 본 연구는 가스의 액화온도에서 상온에 이르는 온도범위와 1bar에서 30bar에 이르는 압력범위에서 질소, 산소, 아르곤에 대한 상태방정식의 물성계산 신뢰도를 검토하고자 하였다. 이를 위하여 Aspen plus에서 제공하는 Soave-Redlich-Kwong, Peng-Robinson, BWR-Lee Staring 상태방정식을 비교대상으로 하였고 계산결과는 문헌치 및 virial식과 비교하였다. 또한 물성계산식이 공정에 미치는 영향을 고찰하기 위하여 초저온 공기분리장치의 증류탑 및 팽창터어빈 계산을 수행하여 상태방정식 차이에 의한 공정계산 차이를 비교, 분석하였다.

• Computers and Concrete
• /
• 제17권1호
• /
• pp.87-106
• /
• 2016

This paper deals with the reliability analysis of design formulations derived for predicting the punching shear capacity of FRP-reinforced two-way slabs. Firstly, a new design code formulation was derived by means of gene expression programming. This formulation differs from the existing ones as the slab length (L) was introduced in the equation. Next, the proposed formulation was tested for its generalization capability by a parametric study. Then, the stochastic analyses of derived and existing formulations were performed by Monte Carlo simulation. Finally, the reliability analyses of these equations were carried out based on the results of stochastic analysis and the ultimate state function of ASCE-7 and ACI-318 (2011). The results indicate that the prediction performance of new formulation is significantly higher as compared to available design equations and its reliability index is within acceptable limits.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.442-449
• /
• 2003

This study presents a new analysis of blast vibration equations of a bridge structures using a reliability index. Changing the reliability makes each blast vibration equation. The blast equations are divided into three classes, having 50%, 90% and 99.9% at ${\beta}$=0, 1.28 and 3 respectively. In the result of this research, the assumption equations which used ${\beta}$=1.28 is suitable. By using these blast equations, it is possible for users to predict reliable ground vibration values upon demand.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.615-618
• /
• 2005

This study concerns the equation of high strength concrete by schmidt hammer test. There are not only few prediction strength equations of concrete by schmidt hammer test, but also many problems to apply them because of time, cost, easiness, structural damage, reliability and so on. For this study, there performed a series of schmidt hammer test with in existing 1,095days' concrete structures and proposed equations as follows ; Linear: ${\Large f}_{ck}=-45.35+2.44R(r^2=72.7\%)$ Quadratic: ${\Large f}_{ck}=-502.08+24.0R-0.25R^2(r^2=82.4\%)$ here, $f_{ck}$ : Estimated compressive strength of concrete by MPa, R : Rebound index of concrete

• 상하수도학회지
• /
• 제11권3호
• /
• pp.96-104
• /
• 1997

In-pipe formation of THM in water distribution systems was simulated by using the continuously and easily measurable parameters such as water temperature, residual chlorine and soluble organic compounds. The concentration of miscellaneous organics which could be the precuror of THM, was measured and represented as the absorbance of ultraviolet at wave length 260 nm. As the results, the developed equation in this study showed a more reliability on the change of THM than the normally regressed equation. In addition, the simulation was successfully fitted in the actual water treatment and distribution systems. Of the THM components, dibromochloromethane was the main cause dropping the overall reliability in the simulation.

• 한국항공우주학회지
• /
• 제46권5호
• /
• pp.393-401
• /
• 2018

고체 로켓 추진기관에서 우발점화를 방지하기 위해 사용하는 전자식 점화안전장치의 신뢰도 예측에 관하여 연구하였다. 신뢰도 예측을 위해 가장 먼저 점화안전장치의 주요 구성품(점화회로, 고전압 기폭관, 격벽착화기)을 정의하고, 각 구성품의 작동원리에 대해 시스템 분석을 수행하였다. 시스템 분석을 통해 선별된 입력 변수를 이용하여 각 부품의 성능 모델링을 수행하였으며, 복잡한 해석이 필요한 경우 반응표면기법을 이용하여 다항식으로 근사하였다. 마지막으로 만들어진 성능 모델링을 기반으로 몬테칼로 시뮬레이션을 적용하여 설계 신뢰도를 예측하였다.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.80-91
• /
• 2022

본 연구에서는 초지연제 혼입률, 양생온도 및 강도수준 변화에 따른 응결지연 특성을 실험적으로 고찰하고, 응결시간과 수화반응속도 관점에서 이들의 영향을 정량적으로 평가할 수 있는 적산온도를 이용한 응결시간 예측식을 제안하고자 하였다. 그 결과, 양생온도, 강도수준(물결합재비) 및 초지연제 혼입률을 결정한 뒤 본 연구에서 제안한 모델식에 대입하면 응결시간을 예측할 수 있다. 모델식의 경우에는 결정계수가 0.9 이상으로 나타났으며, F-검정을 통해 그 신뢰성을 확인하였다. 최종적으로 본 논문에서 제안한 모델식을 활용하면 실무에서 초지연 콘크리트의 응결과 관련하여 합리적인 품질관리가 가능할 것으로 판단된다.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.469-476
• /
• 2003

Despite of considerable research results or uniaxial tension creep available for superalloys, few studies have been made on high temperature creep using the Initial Stram Method (ISM) In this paper, the real-time prediction of high temperature creep strength and creep lift for the nickel-based superalloy Udimet 720 (high-temperature and high-pressure gas turbine engine materials) was performed on round-bar type specimens under pure static load at the temperatures of 538$^{\circ}C$. 649$^{\circ}C$, and 704$^{\circ}C$. The predictive equation derived from the ISM in creep tests showed better reliability than those from LMP (Larson-Miller Parameter) and LMP-lSM (Larson Miller Parameter-Initial Strain Method) specially for long time creep prediction (10$^3$∼10$\^$5/h).

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.256-260
• /
• 2009

Fretting is a kind of wear which effects on reliability and durability. When machine parts are joined joint in parts such as a bolt or a rivet or a pin, fretting phenomenon is occurred by micro relative movement. When fretting occurs in joint parts, there is wear which is the cause of fatigue crack. Recently, although the ways of assessment of fatigue and damage tolerance are established, there is no way to evaluate fatigue crack initiation life by fretting phenomenon. Consequently, the prediction of life and prevention plan caused by fretting are needed to improve reliability. The objective of this paper is to predict fretting wear by using a experimental method and contact analysis considering wear process. For prediction of fretting wear volume, systematic and controlled experiments with a disc-plate contact under gross slip fretting conditions were carried out. A modified Archard equation is used to calculate wear depths from the contact pressure and stroke using wear coefficients obtained from the disc-plate fretting tests.