• 제목/요약/키워드: Reliability

검색결과 26,821건 처리시간 0.054초

금속패드가 Sn계 무연솔더의 저주기 피로저항성에 미치는 영향 (Effects of Surface Finishes on the Low Cycle Fatigue Characteristics of Sn-based Pb-free Solder Joints)

  • 이규오;유진
    • 마이크로전자및패키징학회지
    • /
    • 제10권3호
    • /
    • pp.19-27
    • /
    • 2003
  • 플립칩 전자패키지에서 칩과 기판(PCB)를 연결할 때, 통상적으로 칩쪽은 금속패드/UBM 처리를 기판 쪽은 표면처리를 한 후 솔더로 연결하는데, 이 때 사용되는 UBM이나 표면처리에 따라, 칩/솔더, PCB/솔더에 생성되는 금속간 화합물의 종류와 두께 및 솔더의 조성이 변하게 되어 궁극적으로 솔더 접합부의 기계적 신뢰성에 영향을 주게 된다. 본 연구에서는 Cu와 Au/Ni의 두가지 금속 패드가 무연솔더의 저주기 피로특성에 어떠한 영향을 미치는 지에 대해 고찰해 보았다. 저주기 피로 실험은 Cu나 Au/Ni이 표면처리 된 기판에 무연솔더 (Sn-3.5Ag, Sn-3.5Ag-1.5Cu, Sn-3.5Ag-XBi(X=2.5, 7.5), Sn-0.7Cu)를 리플로하여 총변위를 변화시키면서 상온에서 시행하였다. 기판의 표면처리에 관계없이 Sn-3.5Ag, Sn-3.5Ag-XCu(X-0.75, 1.5), Sn-0.7Cu 합금이 Sn-3.5Ag-7.5Bi 합금보다 피로저항성이 현격히 좋았으며, Au/Ni 표면처리한 솔더 접합부가 Cu 처리한 경우보다 피로저항성이 뛰어난 것으로 나타났다. 파괴 후 단면을 조사한 결과 계면에 형성된 금속간 화합물 내에 미세균열이 발견되었는데, Cu 표면처리를 사용한 경우 더 많은 미세균열이 생성된 것을 볼 수 있었다. Sn-3.5Ag, Sn-3.5Ag-Cu(X=0.75, 1.5), Sn-0.7Cu 합금의 경우 금속간 화합물 내에 생기는 미세 균열이 거시 균열로 성장하지 않고 파단은 항상 솔더 내부로 일어난 반면. Bi를 함유한 솔더의 경우, 기판의 표면처리에 상관없이 금속간 화합물/솔더 계면으로 균열이 생성 진전되어 다른 솔더합금에 비해 열악한 피로저항성을 나타내는 것으로 보인다. 이것은 Bi의 금속간화 합물/솔더 입계 편석이나 Bi 합금이 다른 합금에 비해 높은 경도값을 가지는 것에 인한 것으로 보여 진다.

  • PDF

태양광 접속함 정션박스 모듈 적용을 위한 Sn-3.0Ag-0.5Cu 및 Sn-1.0Ag-0.7Cu-1.6Bi-0.2In 솔더링의 공정최적화 (Optimization of Soldering Process of Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In Alloys for Solar Combiner Junction Box Module)

  • 이병석;오철민;곽현;김태우;윤희복;윤정원
    • 마이크로전자및패키징학회지
    • /
    • 제25권3호
    • /
    • pp.13-19
    • /
    • 2018
  • 본 연구에서는 태양광 접속함 모듈 적용을 위한 유연 솔더(Sn-Pb) 및 무연 솔더(Sn-3.0Ag-0.5Cu 및 Sn-1.0Ag-0.7Cu-1.6Bi-0.2In)의 특성을 비교 평가하였다. 접속함 내에는 전압 및 전류 검출용 모듈, 고내압용 다이오드가 실장된 정류모듈 등 다양한 모듈이 내장되어있다. 본 연구에서는 솔더링특성, 인쇄성, 솔더형상 검사, X-ray를 이용한 솔더 내 void 검사 및 접합강도를 측정하였고, 무연 솔더 합금의 공정최적화는 step 1과 step 2로 구분하여 검토를 실시하였다. Step 1은 유연 솔더와 무연 솔더 페이스트 인쇄 검사 시험을 1차와 2차로 나누어 실험을 진행하였고 printability는 void 함량 및 접합강도의 상관관계로 검토하였다. 전체적으로 유연 솔더의 특성은 무연 솔더에 비하여 상대적으로 우수하였다. Step 2는 리플로우 공정의 최고점 온도 변화에 따른 접합부 특성 변화를 관찰하였다. 리플로우 최고 온도가 증가할수록 접합부 내의 void 함량이 2~4% 정도 감소하였고, 접합강도는 약 0.5 kgf 범위내에서 큰 차이 없이 나타났다. 기판 표면처리종류에 있어서는 ENIG 표면처리가 OSP 및 Pb-free 솔더 표면처리보다 우수한 접합강도를 나타내었다. 1종류의 무연솔더와 OSP 표면처리로 접합된 태양광 접속함 모듈의 500 싸이클 열충격 신뢰성시험 전후에 전기적 특성변화는 0.3% 내의 범위에서 안정적으로 작동함을 확인하였다.

암환자 인식에 관한 연구 - 간호사ㆍ의사를 중심으로

  • 조인향
    • 호스피스학술지
    • /
    • 제2권1호
    • /
    • pp.58-74
    • /
    • 2002
  • This paper constitutes a descriptive investigation and used a structured questionnaire to investigate nurses' and doctors' recognition of cancer patients. The subjects were extracted from the medical personnel working at the internal medicine, the surgery ward, the obstetrics and gynecology department, the pediatrics department, the cancer ward, and the emergency room of five general hospitals located in Seoul and Gyeonggi Province. The research lasted from August, 2001 to September 2001. Total 137 nurses and 65 doctors were included and made out the questionnaires directly distributed by the investigator. The study tool was also developed by the investigator and consisted of such items as the demographic and social characteristics, the medical personnel's recognition degree of cancer and cancer patients, their recognition of the management of cancer patients, and their participation in a hospice. The results were analyzed using the SPSS Window program in terms of technological statistics, ranks, t-test, and ANOVA. The reliability was represented in Cronbach' α=.75. The nurses' and doctors' recognition degree of cancer and cancer patients had an overall average of 3.86 at the 5 point-scale. The items that received an average of 4.0 or more included 'Medical personnel should explain about the cancer cure plans to the cancer patient and his or her family', 'A patient whose case has been diagnosed as a terminal cancer should be notified of it, 'If I were a cancer patient, I would want to get informed of it,' and 'Cancer shall be conquered whenever it is'. In the meantime, the items that received an average of 3.0 or less was 'My relationship with the cancer patient's family has gotten worse since I announced his or her impending death.' And according to the general characteristics and the difference test, the recognition degree of cancer and cancer patient was high among the subgroups of nurses, females, married persons, who were in their 30s, who had a family member that was a cancer patient, and who received a hospice education. The biggest number of the nurses and doctors saw 'a gradual approach over several days'(68.8%) as a method to tell a cancer patient about his or her cancer diagnosis or impending death. Those who usually tell tragic news were the physician in charge(62.8%), the family members or relatives(32.1%) and the clergymen(3.8%) in the order. The greatest number of them recommended a cancer patient's home as the place where he or she should face death because they thought 'it would stabilize his or her mentality'(91.9%) while a number of them recommended the hospital because they 'should give the psychological satisfaction to the patient'(40%) or 'should try their best until the last moment of the patient's death'(30%). A majority of the medical personnel regarded 'smoking or drinking' and 'diet' as the causes of cancer. The biggest symptom of a cancer patient was 'pain' and the pain management of a cancer patient was mostly impeded by the 'excessive fear of drug addiction, tolerance to drugs and side effects of drugs' by medical personnel, the patient, and his or her family. The most frequently adopted treatment plan of a terminal cancer patient was 'to do whatever the patient or his or her family wants' to resort to a hospice' and 'to continue active treatment efforts' in the order. The biggest reasons why a terminal cancer patient went to see a doctor were 'pain alleviation' 'control of symptoms other than pain(intravenous supply)' and 'incapability of the patient's family' in the order. Terminal cancer patients placed their major concern in 'spiritual(religious) matter' 'emotional matters' their family' 'existence' and 'physical matters' in the order. 113(58.5%) of the whole medical personnel answered they 'would recommend' an alternative treatment to a terminal cancer patient mostly because they assumed it would 'stabilize the patient's mentality.' Meanwhile, 80(41.5%) of them chose 'not to recommend it mostly due to the unverified effects and high cost of it(78.7%). A majority of them, I. e. 190(94.1%) subjects said they 'would recommend' a hospice to a terminal cancer patient mostly because they thought it would help the patient to 'mentally prepare'(66.6%) Only 17.3% of them, however, had received a hospice education, most of which was done through the hospital duty education(41.4%) and volunteer training(34.5%). The follows are results of this study: 1. The nurses and the doctors turned out to be still passive and experience confusion in dealing with a cancer patient despite their great sense of responsibility for him or her. 2.Nurses and Doctors realize the need of a hospice, but an extremely small number of them participate in a hospice education or performance. Thus, a whole recognition of a hospice should be changed, for which purpose a hospice education for nurses and doctors should be provided. 3.Terminal cancer patients preferred their home to a hospital as the place to face their impending death because they felt it would bring 'mental stability.' And most of nurses and doctors think it would be unnecessary for them to be hospitalized just for control of their symptoms. Accordingly a terminal cancer patient can be cared at home, and a home hospice care needs to be activated.

  • PDF

2003년부터 2005년까지 안이비인후피부과 학회지에 게재된 논문들의 통계적 분석 방법에 대한 고찰 (The consideration for methods of statistical analysis about the thesis published in the journal of korean oriental medical Ophthalmology & Otolaryngology & Dermatology from 2003 to 2005)

  • 김규석;남혜정;박외숙;김희정;차재훈;김윤범
    • 한방안이비인후피부과학회지
    • /
    • 제19권3호통권31호
    • /
    • pp.134-145
    • /
    • 2006
  • Objective : This study was carried out to investigate what type of assumption and conditions are needed for the application of various statistical techniques such as descriptive statistics, t-test, analysis of variance, correlation analysis, regression analysis and chi-square test and to evaluate that they are used correctly in the research process. Methods : One more methods of statistical analysis were used in 91 papers among 162 papers selected from the journal of Korean oriental medical Ophthalmology & Otolaryngology & Dermatology from April 2003 to December 2005. So we analysed the type of statistical analysis method in 91 papers(clinical and experimental study) and assessed the their validity of statistical techniques by the check list consisting of 34 items(3 items for validity assessment of descriptive statistics, 6 items for t-test, 7 items for analysis of variance, correlation analysis and regression analysis, respectively, 4 items for chi-square test) Results : 1. The type of 65(40%) cases is experimental trial, the type of 55(34%) cases is case report, the type of 26(16%) cases is clinical trial and the type of 16(10%) cases is review, in 91 papers using statistical techniques among 162 papers selected from the journal of Korean oriental medical Ophthalmology & Otolaryngology & Dermatol-ogy from April 2003 to December 2005. 2. One more methods of statistical analysis were used in the experimental and clinical study. When we classified 125 units using statistical analysis methods in 91 papers according to statistical techniques such as descriptive statistics, t-test, analysis of variance, correlation analysis, regression analysis and chi-square test, the number of independent sample t-test is 33(26%), the number of only descriptive statistics is 28(22%), the number of independent sample t-test is 33(26%), the number of only descriptive statistics is 28(22%), the number of one way ANOVA is 15(12%), the number of non-parametric test 10(8%). 3. After carrying out one way ANOVA, the number of using multiple comparison methods is 15(Scheffe:6(26%), Duncan:4(17%), Dunnett:3(13%), Tukey:2(9%)) out of 23 (total case carrying out one way ANOVA). 8(35%) out of 23 did not enforce multiple comparison methods after carrying out one way ANOVA. 4. From the assessment of validity about 63 cases using statistical techniques(except descriptive statistics), 5(8%) cases are proper, the other 58(92%) are improper, so we recognized a serious misuse of statistical application in our journal. 5. The number of case below 10 sample size in experimental and clinical study(except descriptive statistics) is 31(34%) and frequent. Also the number of case containing no mention of sample size is 41(45%, including culture study). 6. For example of statistical error, there are wrong choice of statistical technique, lack of check on standard assumption(such as standard distribution, equivariance, independence), and so on. Conclusions : We investigated the validity of statistical analysis methods in our journal by check list consisting of 34 items and suggested correct statistical analysis methods. We should practice the spread of education about statistical analysis methods and precis application, enhance objectivity and reliability of our thesis and further correspond with purpose of scientific study.

  • PDF

치과위생사들의 직무만족과 삶의 질에 관한 연구 (A Study on the Job Satisfaction and Quality of Life in Dental Hygienists)

  • 김영경
    • 한국치위생학회지
    • /
    • 제3권2호
    • /
    • pp.127-141
    • /
    • 2003
  • The present study conducted a survey on the correlation between job satisfaction of dental hygienists and their workplace satisfaction and quality of life. A total of 249 surveys eligible among all the collected surveys were used in the analysis. The survey consisted of 61 items; 35 items were about self-evaluations of their satisfaction with their tasks, occupation, and workplace, as well as the degree of self-affirmation and their family-related satisfaction; the rests were 26 WHOQOL-BREF items investigating the quality of life. Collected data were processed using the SPSS Ver. 10.0 calculating the reliability with the frequency, percentage, and Cronbach's ${\alpha}$. Besides, one-way ANOVA and linear regression analysis examined the correlation between the variables. The conclusion is as follows: 1. By Age: Job satisfaction and family-related satisfaction were highest in the subjects aged 30 or older($3.5377{\pm}0.6891$ at pF0.05 and $4.1789{\pm}0.5431$ at pF0.05, respectively), though the differences were not statistically significant). Workplace satisfaction and self-affirmation were also highest in those aged 30 or order($3.5753{\pm}0.4210$ at pE0.05 and $3.9695{\pm}0.4616$ at pE0.05, respectively). The differences were statistically significant. Quality of life was also highest in those aged 30 or older($3.4095{\pm}0.3529$, pF0.05). 2. By Types of Dental Institutions: Job satisfaction and workplace satisfaction were highest in the subjects who worked at the dental department in a general hospital($3.7431{\pm}0.5940$ at pF0.05 and $3.6615{\pm}0.4602$ at pF0.05. respectively), though without statistical significance. Self-affirmation was highest in those working in university hospitals($3.773{\pm}0.7151$, pF0.05), while family-related satisfaction was highest, though without statistical significance, in those working at the dental department in general hospitals($4.2500{\pm}0.5528$, pF0.05), who also showed highest quality of life with statistical significance($3.4046{\pm}0.4155$, pE0.05). 3. By Years at Work: The subjects who had worked as a dental hygienist for 12 years or more showed highest satisfaction or scores in all the variables investigated: job satisfaction($3.9326{\pm}0.6673$, pE0.05): workplace satisfaction($3.8316{\pm}0.4342$, pE0.05): self-affirmation($4.2000{\pm}0.4551$, pE0.05); family-related satisfaction($4.3778{\pm}0.4692$, pF0.5): and quality of life($3.5235{\pm}0.4323$, pF0.05). All but quality of life showed a difference with statistical significance. 4. Correlation between Quality of Life and Overall Job Satisfaction: Quality of life doesn't have a correlation with the subjects' satisfaction with their occupation or with their self-affirmation, while it does have a correlation with workplace satisfaction and family-related satisfaction(F=15.983, Sig=0.000, $R^2$=0.209). Besides, workplace satisfaction has a significant correlation with all the variables: job satisfaction, self-affirmation, family-related satisfaction, and quality of life(F=38.563, Sig=0.000, $R^2$=0.389). The above result shows that workplace satisfaction has a high correlation with job satisfaction, self-affirmation, family-related satisfaction and with quality of life. Consequently, to enhance satisfaction of dental hygienists with their workplace, it would be important to promote their autonomy and make desirable wokplace environments so that they can work efficiently with pride for their job.

  • PDF

포항분지 영일층군 이암층의 수리지질학적 차폐능 평가: 수은 모세관 압입 시험의 결과 분석을 중심으로 (Evaluation of Hydrogeologic Seal Capacity of Mudstone in the Yeongil Group, Pohang Basin, Korea: Focusing on Mercury Intrusion Capillary Pressure Analysis)

  • 김선옥;왕수균;이민희
    • 자원환경지질
    • /
    • 제53권1호
    • /
    • pp.23-32
    • /
    • 2020
  • 이산화탄소 지중저장은 대규모로 포집된 이산화탄소를 지하 심부의 지질구조 내로 주입하여 대기중 방출을 제한하려는 지구온난화 대응기술이다. 본 연구에서는 국내 최초의 이산화탄소 지중주입 실증 연구 지역인 포항분지의 지하 800 m 이하에서 시추된 심부 코어 시료를 대상으로 FE-SEM, XRD, XRF, MICP 등 분석을 수행하여 덮개암층을 구성하는 이암의 광물학적 특성을 규명하고 이산화탄소 지중저장의 안정성과 신뢰성에 직접적인 영향을 미치는 수리지질학적 차폐능을 정량적으로 평가하고자 하였다. 광물학적 분석 결과 포항분지 영일층군 이암층은 주로 석영, K-장석, 사장석과 소량의 황철석, 방해석, 점토 광물로 이루어져 있는 것으로 나타났다. 수은 모세관 압입 시험 분석 결과, 시료는 대체적으로 균일한 입자 구성과 공극 분포를 가지고 있었으며, 산정된 공극률과 공기 투과도 사이에서 뚜렷한 상관관계는 나타나지 않았다. 산정된 공극진입압력과 돌파압력을 적용한 허용가능 CO2 기둥 높이는 이산화탄소 주입 대상층의 두께에 비해 현저하게 높은 것으로 나타났다. 이러한 결과는 포항분지 영일층군의 이암층이 이산화탄소 지중저장 주입실증 사업에서 시범 주입되는 이산화탄소의 누출을 억제하기에 충분한 차폐능을 보유하고 있음을 보여주었다. 그러나, 본 연구의 결과는 제한된 수량의 시료를 분석·평가한 것으로서 그에 상응하는 제한된 의미를 지닌다. 따라서, 실제적인 이산화탄소 지중저장 과정에서 수행되는 덮개암층의 차폐능 평가를 위해서는 지층 전체 규모에 대한 다수의 시료 채취와 그에 대한 다면적 분석과 평가가 이루어져야 할 것으로 판단된다.

정보보안이 안드로이드와 iOS 기반 스마트폰 소비자 선호에 미치는 영향 (A Study on the Influence of Information Security on Consumer's Preference of Android and iOS based Smartphone)

  • 박종진;최민경;안종창
    • 인터넷정보학회논문지
    • /
    • 제18권1호
    • /
    • pp.105-119
    • /
    • 2017
  • 현재 국내 인구의 85% 이상이 스마트폰을 사용 중이며, 개인의 사생활과 다양한 정보들이 스마트폰 내부에 저장되어 있다. 이러한 정보를 불법으로 취득하고자 악성코드와 스파이웨어 등을 유포하여 사용자에게는 금전적인 피해를 입히는 사례들이 증가하고 있다. 이에 따라 스마트폰을 이용하는데 있어 정보보안의 필요성은 불가피하며 사용자의 보안 인식이 중요시 되고 있다. 본 논문에서는 정보보안이 사용자들의 스마트폰 운영체제 선택에 어떠한 영향을 미치는지에 대해서 알아보고자 한다. 스마트폰 사용자를 대상으로 온라인 설문조사를 실시하여 수집한 응답지 218개를 샘플로 통계분석 프로그램 IBM SPSS Statistics 22를 사용하여 요인분석을 통한 공통성, 신뢰성 분석 그리고 회귀분석을 통해 가설을 검증하였다. 검증 결과, 하드웨어 환경에 따라 지각된 용이성에 영향을 주는 것을 알 수 있었다. 스마트폰의 사용을 통해 즐거움을 얻고 편하게 사용하고자 하는 소비자의 의도는 스마트폰의 하드웨어가 그 기능을 수행하기 위해 뒷받침되어야 함이 검증되었다. 또한 브랜드 영향력은 지각된 유용성과 지각된 용이성에 모두 영향을 미침을 알 수 있었다. 개인위험 감수정도에 따라 스마트폰 스파이웨어 위험성을 인지하는데 차이가 있다는 가설이 채택되었다. 또한 지각된 유용성, 지각된 용이성, 개인위험 감수정도, 스파이웨어 위험성이 스마트폰 구매의향에 유의한 영향을 준다는 것을 파악하였다. 한편 안드로이드와 iOS 운영체제(OS) 사용자의 집단간 차이분석 결과 두 집단 간에는 유의한 차이가 없음을 알 수 있었다. 본 연구의 결과는 국내 스마트폰 관련 기업 및 실무자에게 중요한 시사점을 줄 수 있고, 정보시스템 관련 분야 연구에 새로운 관점을 제시해 줄 수 있다는 점에서 유용성을 가진다.

LCC 기법을 통한 가축분뇨처리시설의 경제성 분석 (Economic Analysis of the Livestock Manure Treatment System Using Life-Cycle Cost Technique)

  • 김재환;조승희;곽정훈;최동윤;정광화;정의수;정만순;박성균
    • 한국축산시설환경학회지
    • /
    • 제17권sup호
    • /
    • pp.61-68
    • /
    • 2011
  • 본 연구는 가축분뇨 처리시설의 평가 및 최적 선택의 의사결정에 있어서, 시설물은 내구성이 있는 자산이므로 내용연수 전 기간에 걸친 비용측면에서의 경제성이 고려되어야 하는 바, 이를 위하여 LCC (Life Cycle Cost) 기법의 적용 가능성을 검토하고자 수행하였다. 경제성의 비교 분석을 위해 양돈 분뇨 1일 100톤 처리규모의 공동자원화시설 설치 공법들 중 4개 공법에 대한 시설투자 및 연간 운영비를 조사하였는데, 초기 투자비는 2,699~3,202 백만원 수준으로 T 공법이 가장 높았고 E 공법이 가장 낮았다. 연간 운영비에 있어서는 378~498 백만원 수준으로 T 공법, J 공법, E 공법, B 공법 순으로 유리한 것으로 조사되었다. LCC 분석을 위해 한국은행 및 통계청의 10년간 ('00~'09) 자료를 이용하여 이자율 (4.7%), 물가상승율 (3.13%), 실질 할인율 (1.52%)를 기준하고, 현가계수 산정을 위해 내용연수를 토목 건축 (30년), 기계 (10년), 전기계장 (15년) 으로 기준하였다. 이를 바탕으로 한 분석 결과, 톤당 운영비로 보면 17,570~18,998원/톤 수준으로서 E공법이 17,570원/톤으로 가장 낮은 반면, B 공법이 20,661원/톤으로 가장 높아 상대적으로 가장 비경제적이었다. 특히 초기투자비가 높더라도 연간 운영비가 낮은 T 공법이 초기투자비는 T 공법보다 낮으나 연간 운영비가 상대적으로 높은 B 공법에 비해 LCC가 낮게 평가되었다. 따라서 가축분뇨 처리시설의 경제적 측면에서의 공법 선택에 있어서는 초기시설투자비 또는 연간 운영비 중 어느 한쪽만 평가하여 결정하기 보다는 LCC 분석을 적용하여 평가하는 것이 합리적임을 알 수 있다. 또한 경제성 분석에 있어서, 불확실성에 따른 LCC 분석 결과의 변화를 파악하기 위해 '00~'09년 간의 할인율 변동폭을 적용하여 민감도분석을 실시한 결과, 변동범위 안에서 변화하더라도 각 대안별 비용우위에 대한 변화는 달라지지 않아 안정적이라고 할 수 있다. 따라서 LCC를 이용한 경제성 평가는 가축분뇨 처리시설의 선택을 위한 의사결정에 유용한 평가 지표가 될 수 있으리라 판단된다. 향후 분석의 신뢰성 제고와 활성화를 위해서는 각 비용요소들에 대해 공신력 있는 데이터베이스 구축이 대단히 중요하며, 아울러 시설평가 시 정성적인 요인도 고려할 수 있는 연구가 추가적으로 이루어져야 할 것이다.

AHP를 활용한 가축분뇨 처리시설 및 관련기술 평가지표 가중치 설정 (The Weight Analysis of Evaluation Indicators for Assessing Livestock Manure Treatment System and its Technology by AHP)

  • 김재환;조승희;곽정훈;최동윤;정광화;천동원;이성현;김진호;소규호;박치호
    • 한국축산시설환경학회지
    • /
    • 제17권sup호
    • /
    • pp.51-60
    • /
    • 2011
  • 본 연구는 '가축분뇨의 관리 및 이용에 관한 법률'에 의거 '08년부터 농촌진흥청에서 수행하고 있는 '가축분뇨 처리시설 및 관련기술 평가' 사업의 효과나 평가 절차 및 방법 등에 대해 점검해 보고, 각 평가항목 간의 AHP (Analytic Hierarchy Process, 계층분석법)를 통하여 가중치의 타당성 검토와 제도운영의 개선방안을 마련하고자 직접적 이해관계자인 평가를 받은 30개 업체의 전문가를 대상으로 우편 설문조사를 실시하여 분석하였다. 본 평가사업의 종합평가 결과는 시설업체 및 축산농가 등에 가축분뇨 처리시설에 대한 신뢰성 확보에 도움이 되었으며, 평가의 주요 항목인 '업체의 능력', '기술력', '시설의 처리효율', '시설의 편이성', '경제성'에 대해서는 평가결과의 객관성 측면에서 70% 이상이 보통 이상이라 응답하고 있으나 객관적 평가 또는 매우 객관적이라 응답한 비율은 각각 46.4%, 46.4%, 57.1%, 53.6%, 35.7%로써 경제성 평가분야가 가장 낮아 이에 대한 보완이 필요함을 나타내었다. 또한 가축분뇨 처리시설에 대한 종합평가시 평가 항목간 합리적 가중치를 부여하기 위하여, AHP를 실시한 결과 공법 선택의 기준 중 기술성과 경제성에 대한 가중치는 0.425, 0.575로서 경제성의 비중이 높았다. 기술성 요소로 대표되는 '기술의 현장 적용성'과 '시설의 관리 용이성' 및 '처리 효율성'에 대한 가중치는 각각 0.226, 0.375, 0.399로서 '처리 효율성'이 가장 높았으며, '기술의 현장 적용성'이 가장 낮게 평가 되었다. 이러한 결과를 바탕으로 현재의 가중치와 비교해 보면 현재는 기술성 특히 처리효율에 대해 과대 평가되고 있어 개선이 필요하다. 따라서, 추후 가축분뇨 처리시설 종합평가시 AHP를 이용한 각 항목별 가중치를 적용한 기술성 평가를 종합적으로 고려할 경우 평가의 객관성 확보와 평가사업의 신뢰도를 높이는데 크게 기여할 것으로 판단되며, 향후 다수의 계층적 요인과 기술 수요자도 포함하여 분석 범위를 확대할 필요가 있다.

폴리에틸렌 배관 버트융착부 열용융거리 측정에 대한 연구 (A study for detection of melt flow zone about polyethylene butt fusion joints)

  • 길성희;김영구;조영도;이연재
    • 에너지공학
    • /
    • 제25권4호
    • /
    • pp.103-109
    • /
    • 2016
  • 폴리에틸렌(Polyethylene) 배관은 가요성이 좋고 부식이 되지 않는 등의 장점으로 가스배관 뿐만 아니라 원자력 발전소의 배수관, 석유화학 및 정유사 공정배관 등으로 그 사용범위가 점차 확대되고 있다. 그러나 폴리에틸렌 배관의 연결부를 직접적으로 검사할 수 있는 검사방법이 개발되지 않아서 사용범위를 확대하는데 제한을 받고 있다. 폴리에틸렌 배관의 연결방법은 전기융착 방법과 버트융착 방법으로 구분할 수 있는데 이 중에서 가장 많이 사용하는 방법은 버트융착이다. 버트융착은 배관과 배관을 열판에 맞닿게 하고 일정한 온도 및 압력을 가한 후 열판을 제거하고 용융된 배관의 말단부를 서로 연결하는 방법으로서 별도의 연결구가 필요하지 않아 가장 많이 사용하고 있는 연결방법이다. 버트융착 시에 열판으로부터 열이 용융된 후 압력을 가하면 용융부는 비드를 형성하는 부분과 연결부를 형성하는 부분으로 분리되고 냉각과정을 거쳐 버트융착부가 된다. 본 연구는 연결부를 형성하는 부분에서 열판으로부터 열이 전파되어 용융된 거리를 측정하고 이 결과를 연결부에 대한 건전성 평가 방법 중의 하나로 제시하고자 한다. 외경 225mm, 두께 20.5mm의 중밀도 폴리에틸렌 가스용 1호관의 초음파 속도를 측정한 결과 2,200m/s 였다. 열용융 거리를 측정하기 위하여 열판으로부터 열이 전파되어 폴리에틸렌을 가열하는 시간을 0%~130%까지 변화시켜 시험편을 제작하였다. 또한 정상적인 가열시간(100%의 가열)을 제공하고 스크레핑 처리를 하지 않은 시험편과 토양을 삽입한 시험편 그리고 자갈을 삽입한 시험편과 비닐류를 삽입한 시험편을 제작하였다. 총 20개의 시험편에 대한 열용융 거리를 측정하기 위하여 3.5MHz 및 5.0MHz 센서를 이용하였으며 1개의 시험편에 대하여 총 3곳에서 초음파 탐상을 실시하였다. 열용융 신호를 명확하게 구분하기 위하여 모든 탐상 결과에 대하여 동일한 post image processing을 수행하였고 이미지 레벨, contrast, sharpen 및 threshold를 적용하였으며 결과 탐상은 가장 직관적으로 파악할 수 있는 gray scale로 표현하였다. 탐상 결과 가열시간이 짧은 시험편일수록 융착이 이루어지지 않아 멀티플 에코가 반사되는 영역이 증가하였으며 이 부분을 최대한 배제할 수 있는 위치에서 데이터를 획득하였다. 정상적인 가열시간의 80%인 168초의 시간을 가한 시험편부터 열용융 거리에 대한 반사신호가 뚜렷이 구분되었으며 이 시험편부터 거리 측정을 실시하였다. 가열시간이 정상가열시간의 7%인 15초의 가열시간을 가한 시험편부터 더 낮은 가열시간을 가한 시험편의 경우 융착이 이루어지지 않아서 3곳 모두 데이터 영상을 획득할 수 없었다. 위 실험 결과로 위상배열초음파를 통해 폴리에틸렌 배관 버트융착부에서 열이 용융되어 전파된 거리 측정이 가능함을 확인하였으며 또한 열이 용융되어 전파된 거리 측정을 통해 정상적인 융착과 불완전 융착을 구분할 수 있음을 확인할 수 있었다.