• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.10
• /
• pp.867-875
• /
• 2018

Conventional nylon wire cutting-type holding and release mechanisms (HRMs) are limited to securely hold the solar panel under launch environment as the size of the panel increases because the nylon wire is tightened directly on the surface of the solar panel. In this study, we proposed a nylon wire cutting-type HRM for 6U CubeSat's solar panel applying elliptic-shaped bracket with a Ball & Socket interface. The proposed HRM has the advantage of higher holding capability along in-plane and out-of plane directions of solar panel and simplicity in tightening process of nylon wire. The design drivers of structural design of CubeSat's solar panel with the proposed HRM were defined by structural analysis under launch loads. In addition, The design effectiveness of the proposed HRM was verified through the functional tests according to the thickness of nylon wire and the number of wire winding under various temperature conditions.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.181-197
• /
• 2003

The Purpose of this study was to examine the kinematic analysis of the upper-limb motion of wheelchair basketball free throw shooting. Three-dimensional kinematic data were obtained from 8 male wheelchair basketball players performing a successful free throw. Players were divided into three groups, according to their IWBF classification(Group 1: 1 point players, Group 2: 2-2.5point players and Group 3:3.5-4 point players) Wheelchair basketball free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. Players from Group 1 and 2 tended to release the ball from a lower height, with greater velocity and release angle. Players from Group 1 showed greater shoulder horizontal adduction and horizontal abduction angle, wrist ulnar flexion and radial flexion angle, and trunk angle. but players from Group 2 appeared lower shoulder abduction. Upper limb angular velocity showed most greatly in hands from Group 1, upperarm from Group 2, and forearm from Group 3.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.125-139
• /
• 2008

The purpose of this study is to compare and analyze a kinematic characteristics of throwing performance among born visually impaired, postnatal visually impaired and visually correct people through their kinematic characteristics. Another purpose of this study is to prevent injury and improve blind's exercise leadership and physical abilities. Three video cameras were used and each camera's shooting velocity was 60field/sec. Then the longest thrown pose was collected and analyzed by using Kwon 3D ver. 3.1 program. The results obtained from this study were followings; 1. During release, the fastest speed of ball was visually corrected followed by postnatal visually impaired and then born visually impaired. 2. Visually corrected used wrist joint well and had wide body round range with similar motion patterns, however born visually impaired couldn't do this at all. 3. Visually corrected used waist to lead shoulder at Phase 2 while throwing ball, but some of born visually impaired and postnatal visually impaired couldn't use waist to lead shoulder. 4. Visually corrected looked at the way where ball would go, but blinds couldn't look where ball would go. 5. Not like visually corrected who show similar patterns, born visually impaired showed each different patterns and some postnatal visually impaired showed similar patterns with visually corrected. 6. While throwing ball, visually corrected showed flexible weight-movement, postnatal visually impaired were not good as visually corrected, and born visually impaired couldn't do weight-movement at all. Synthetically, this result showed that throwing motions are affected a lot by the time when people became blind.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.62-67
• /
• 2011

Launching tube is a kind of case to protect the guided weapons from external environments and conducted as a guide when they are fired. The guided weapons have been firmly kept at the launching tube and transferred, and would be separated at the required time when they are fired To meet the aim, it has been used explosive bolts which are reliable and efficient mechanical fastening devices having the special feature of a built-in release. The disadvantage of explosive bolt lies in that it is based on the high explosive effect of a pyrotechnic charge. When the explosive bolt is ignited, there are some bad effects; a flame, fragments and pyro-shock. Because of these bad effects there are many restriction to use bolt as joining devices to precision guided weapons. To solve these problems, the aim of the present work is to invent the ball-type separation bolt which is a pyrotechnically releasable mechanical linking device for two mechanical elements that does not suffer from such drawbacks. A standard pressure cartridge can moreover be easily integrated inside the device according to the present work and this with no modification to its structure. The present work was represented quantitatively the margin of separation safety and analysed separation mechanism in ball type separating bolt to perform the dynamic separation test.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.210-215
• /
• 2006

Mechanical alloying (MA) by high energy ball mill of pure copper and niobium powders was carried out under the Ar gas atmosphere. The supersaturated solid solution can be produced in the range up to $Cu_xNb_{100-x}$(x=5-30) by MA for 120 hrs, as demonstrated by X-ray diffraction, DSC analysis and the electronic studies through a change in the superconducting transition in the low-temperature specific heat. The $Cu_{30}Nb_{70}$ samples ball-milled for 120 hrs exhibit only a broad exothermic heat release. The total energy, ${\Delta}H_t$ accumulated during MA far the mixture of $Cu_{30}Nb_{70}$ powders increased with milling time and approached the saturation value of 7.5 kJ/mol after 120 h of milling. It can be seen that the free energy difference between the supersaturated solid solution and the mixture of $Cu_{30}Nb_{70}$ powders is estimated to be 7 kJ/mol by Miedema et al. Hence it is thermodynamically possible to assume the formation of a supersaturated solid solution phase in this system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.212-234
• /
• 1999

Dental restorative materials must have the physical properties to withstand wear and corrosion. Base metal alloys possess better mechanical properties and lower price than the gold alloys. For these reasons such alloys have largely replaced the precious metal alloys. One aspect to con-sider is the release of metal substances to oral environment. The release of elements from dental alloys is a continuing concern because the elements may have the potentially harmful biological effects on local tissues. The purpose of this study was to minimize metal release on the nonprecious metal surfaces by ion beam assisted deposition(IBAD) of titanium nitride (TiN) Ni-Cr-Be alloys with and without TiN coatings were secured in an wear test machine opposing ruby ball to determine their relative resistance to wear with loom, 200m, 300m and 400m sliding distance. And the corrosion behavior of the Ni-Cr-Be alloys with and without TiN coatings and 3 dental noble alloys have been studied. Potentiodynamic curves were used to analyse the corrosion characteristics of the alloys. The measurement of the released Ni and Cr ions was conducted by analysis of the electrolyte solution with atomic absorption spectroscopy. The results were as follows : 1. The critical sliding distance that wore down TiN coatings of $2.5{\mu}m$ thickness in this study condition was 300m. 2. Ion beam assisted deposition of TiN showed a good surface modification with respect to the properties of wear and corrosion resistance. 3. X-ray diffraction showed that the strongest peak of TiN is TiN(111) in the coatings. 4. The release of Ni and Cr ions from alloys measured by means of atomic absorption spectroscopy was reduced by ion beam assisted deposition of TiN.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.4
• /
• pp.437-443
• /
• 1984

Muscular exercise induced by electrical stimulation of femoral nerves in perfused rat hindquarters(5 contractions per sec) in the presence of insulin and glucose effected a rapid increase(c. a. two-fold) in the level of citric acid cycle intermediates. The highest values were found within one minute of stimulation. The tissue concent ratios of lactate, pyruvate and alanine increased rapidly on initiation of exercese. Release of lactate also increased rapidly, whereas that of pyruvate was only moderately elevated. In the course of three minute exercese, the sum of alanine, glutamate and aspartate was only transiently elevated. A fall in creatine-p and ATP in the stimulated muscle was accompanied by increases in tissue level of AMP and release of ammonia into perfusing medium. However, the changes in glutamine were small. It is concluded that the pool of citric acid cycle intermediates is expanded during muscular work due (a) to an elevated level of pyruvate, leading to shifts in the levels of alanine and cycle intermediates vie trans-amination reactions and (b) to stimulation of the purine nucleotide cycle due to elevated AMP, resulting in generation of cycle intermediates and ammonia at the expense of aspartate.

• Journal of Hydrogen and New Energy
• /
• v.20 no.3
• /
• pp.188-193
• /
• 2009

Fuel cell vehicles are equipped with Pressure Relief Devices(PRDs) installed in pressure tank cylinder to prevent the explosion of the tank during a fire. PRDs are safety devices that perceive a fire and release gas in the pressure tank cylinder before it is exploded. But if the PRD does not actuate, because either the PRD fails or can't be surrounded by the flame of a fire, the tank will rupture and produce a blast wave and hydrogen fire ball. In this paper, we observed the fire behavior of actual fuel cell vehicle, comparing with that of gasoline vehicle.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.7-12
• /
• 2015

In this paper, we report a non-explosive separation device for a small satellite which utilize a shape memory alloy actuator and spring clamp. In order to increase the preload, the proposed device employs spring clamp that can generate high toque when the shape memory alloy actuator makes the cylinder key unlatch a holding ball effectively. Owing to simple design of separation device configuration, we could obtain good repeatability(up to 30 times activation). Conclusively, we could develop a non-explosive separation device which can reliably activate within 1.2 sec under high preload(up to 300kgf).

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.67-75
• /
• 2009

The purpose of this study is to analyze the effects of target position on the bowling motion. Four female high school athletes with more than four years of bowling experiences were recruited to this study. The major results of this study are as follows; When a subject treats the 1st pin, The spin angle of a coxa for the target position is largely kept from the downswing to the backswing peak point. When a subject treats the 7th pin, As the 7th pin exists at the left side for the right shoulder axis of the thrower, the movement of the ball center of the thrower from side to side is the lowest. In addition, the time required and horizontal speed appear the highest in the release section. The slant angle of a shoulder is largely increased as she moves from the backswing peak point to the release section. The twist angle of a shoulder also appears small as a throw motion is made toward the left side. When a subject treats the 10th pin, The spin angle of a shoulder and the twist angle of a body in motion appear the largest in the release section. So, there are the effects of target position on the bowling motion.