• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.1
• /
• pp.60-69
• /
• 2005

Orthopedic rapid maxillary expansion(RME) has been a common treatment modality used to widen narrow maxillae in young children. However, since more skeletally matured adolescents or adults has closed midpalatal suture, the result of RME was undesirable because of dental tipping with little or no basal skeletal movement and resulted to many other complications. After such treatment, complications often occurred such as alveolar bending, compression of periodontal ligament, extrusion, buccal tipping, and severe relapse. Thus, surgically assisted rapid maxillary expansion(SA-RME) is required, especially for patients over 14 years old, to skeletally release maxillary expansion. We used two methods of maxillary expansion surgery. Surgically assisted rapid maxillary expansion(SA-RME) & surgically assisted posterior segmental expansion(SA-PSE) were used for narrow maxilla. The study was divided into two groups(SA-RME group and SA-PSE group). SA-RME group was consisted of 2 males and 4 females, and the ages of materials ranged from 15 years to 25 years with a mean of 20.2 years. SA-PSE group was consisted of 1 male and 5 females, and the ages ranged from 13 years to 23 years with a mean of 18.7 years. Dental study models were fabricated before starting the expansion and immediately after the expansion was completed. It was fabricated again 1 month later, 3 months later when the expansion device was removed, and 6 months later after the expansion was completed. A repeated measures analysis of variance(ANOVA) test was applied to assess changes between each groups over time. The amount of expansion and the amount of tipping movement each in both groups were compared by using paired t-test and it was also compared between each subjects within the group by using independent t-test. Both SA-RME and SA-PSE group showed stable results, but SA-PSE group showed statical significance in tipping movement of second premolar. We compared 6 patients who recieved SA-RME with 6 patients who received SA-PSE, and appraised the clinical usefulness.

• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.228-233
• /
• 2013

It has been continuously generated the requirement for the replacement of the main components such as a steam generator due to the deterioration of the nuclear power plant all around the world. Also, a large amount of radioactive metal was generated during the decommissioning in a short period. It is required to make an accurate measurement of the residual radioactivity for recycling the metal waste for releasing from regulatory control. In planning the measurement procedures, the influence of geometry, self-absorption, density and other relevant factors on the representativeness of the measurements should be considered for the decommissioning metal waste. In this study, the method for measurement procedures, the source term evaluation, the ways to secure representative samples, the measurement device for wide area and the self-absorption correction factors for different density were evaluated. The metal samples for measurement were prepared for securing the simple geometry and representative by melting process. The developed correction method for measuring the radioactivity a variety density of metal waste could improve the reliability of the evaluation results for clearance.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.31-41
• /
• 2012

This study collected 5,100 cases of gas accident occurred in Korea for 14 years from 1995 to 2008, established Database and based on it, analyzed them by detailed forms and reasons. As the result of analyzing the whole city gas accidents with Poisson analysis, the item of "Careless work-Explosion-Pipeline' showed the highest rate of accidents for the next 5 years. And, "Joint Losening and corrosion-Release-Pipeline" showed the lowest rate of accident. In addition, for the result of analyzing only accidents related to LPG vaporizer, "LPG-Vaporizer-Fire" showed the highest rate of accident and "LPG-Vaporizer-Products Faults" showed the lowest rate of accident. Also, as the result of comparing and analyzing foreign LPG accident accompanied by Jet fire, facility's defect which is liquid outflow cut-off device and heat exchanger's defect were analyzed as the main reason causing jet fire, like the case of Korea, but the number of accidents for the next 5 years was the highest in "LPG-Mechanical-Jet fire" and "LPG-Mechanical-Vapor Cloud" showed the highest rate of accidents. By grafting Poisson distribution theory onto gas accident expecting program of the future, it's expected to suggest consistent standard and be used as the scale which can be used in actual field.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.272-277
• /
• 2018

Background: Studying the ecosystem carbon cycle requires analysis of interrelationships between soil respiration (Rs) and the environment to evaluate the balance. Various methods and instruments have been used to measure Rs. The closed chamber method, which is currently widely used to determine Rs, creates a closed space on the soil surface, measures $CO_2$ concentration in the inner space, and calculates Rs from the increase. Accordingly, the method is divided into automatic or manual chamber methods (ACM and MCM, respectively). However, errors of these methods and differences in instruments are unclear. Therefore, we evaluated the characteristics and difference of Rs values calculated using both methods with actual data. Results: Both methods determined seasonal variation patterns of Rs, reflecting overall changes in soil temperature (Ts). ACM clearly showed detailed changes in Rs, but MCM did not, because such small changes are unknown as Rs values are collected monthly. Additionally, Rs measured using MCM was higher than that using ACM and differed depending on measured plots, but showed similar tendencies with all measurement times and plots. Contrastingly, MCM Rs values in August for plot 4 were very high compared with ACM Rs values because of soil disturbances that easily occur during MCM measurements. Comparing Rs values calculated using monthly means with those calculated using MCM, the ACM calculated values for monthly averages were higher or lower than those of similar measurement times using the MCM. The difference between the ACM and MCM was attributed to greater or lesser differences. These Rs values estimated the carbon released into the atmosphere during measurement periods to be approximately 57% higher with MCM than with ACM, at 5.1 and $7.9C\;ton\;ha^{-1}$, respectively. Conclusion: ACM calculated average values based on various Rs values as high and low for measurement periods, but the MCM produced only specific values for measurement times as representative values. Therefore, MCM may exhibit large errors in selection differences during Rs measurements. Therefore, to reduce this error using MCM, the time and frequency of measurement should be set to obtain Rs under various environmental conditions. Contrastingly, the MCM measurement is obtained during $CO_2$ evaluation in the soil owing to soil disturbance caused by measuring equipment, so close attention should be paid to measurements. This is because the measurement process is disturbed by high $CO_2$ soil concentration, and even small soil disturbances could release high levels into the chamber, causing large Rs errors. Therefore, the MCM should be adequately mastered before using the device to measure Rs.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.367-395
• /
• 2015

Mobile games have taken 80% of the market sales in smart device application industry that is highly regarded as one of the fast growing pool of cultural content after the distribution of smart devices. One of the most successful mobile games after the smart device's appearance is . created by Gung-ho Online entertainment under Softbank Japan, has gained the sales revenue of one trillion dollars after its release in 2012, just after one year of its exposure to the market. The game also has been the top rank by Worldwide Mobile Game Revenues for 2years achieving 40 million downloads worldwide in 2015. However, there is no place for a Korean game in world mobile game sales ranks yet. Even though the mobile game industry has been expanding every year, Korean games are losing its places in the market. Therefore, the analysis of a successful game such as is vital for diagnosing Korea's game content and its lack of direction. This study utilizes K. Masanao's Matrix for Creating Profit System for analyzing 's factors for its success. First, the game has incorporated puzzle and RPG contents for creating a new genre, which led various age groups to play the game. Second, the developers have applied 'limited time' in-game festivals and collaborations between the game and famous contents such as God Festival and Character Draw system to increase the profit revenue. Third, the company communicated with on and off line players to seek their needs for developing the game's better development. Consequently, the three success factors of deduced from this study not only reflect the related researches and academic values, but also contribute for the search in finding better ways to developing game contents for Korean mobile game industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1566-1573
• /
• 2006

The study was conducted on 30 true acyclic Sahiwal cows (15 cows, ${\geq}90$ days postpartum; 15 postpubertal heifers, ${\geq}30$ months of age) and a similar 20 untreated controls (10 cows, 10 heifers). An 'Eazi' breed Controlled Internal Drug Release (CIDR) device (containing 1.38 g progesterone) was inserted intravaginally for 7 days (days 0 to 7) followed by 500 IU eCG i.m. at CIDR removal in all the treated animals. Heifers also received 5 mg oestradiol valerate i.m at CIDR insertion. The reproductive performance of these animals was recorded in terms of oestrus induction response, conception and pregnancy rates. Plasma progesterone ($P_4$) and oestradiol-$17{\beta}$ ($E_2$) profiles of 4 representative animals from each treatment group before, during and after CIDR treatment were also monitored. An oestrus induction response of 100% was observed in treated cows and heifers. The majority of cows (53.3%) and heifers (60%) were induced to oestrus within 24-36 and 36-48 h, respectively after CIDR withdrawal; with mean intervals of $44{\pm}3.18$ and $48{\pm}2.35h$, respectively. The conception rate at induced oestrus was higher in cows (40%) than heifers (20%). The final pregnancy rates after 2 subsequent oestruses were 80 and 60% in cows and heifers, respectively (overall 70% for all treated animals). In comparison, only 10% of control animals (2 cows only, 2/20) showed oestrus and become pregnant (10%) during theentire study period. The pretreatment (day 0) mean plasma P4 levels were statistically (p>0.05) similar in cows and heifers ($0.40{\pm}0.04$ and $0.49{\pm}0.11ng/ml$, respectively). The peak $P_4$ levels were observed on day 1 in cows ($13.94{\pm}1.41ng/ml$) and day 2 in heifers ($19.15{\pm}3.30ng/ml$) with a progressive decline up to the day of CIDR withdrawal ($3.35{\pm}0.92$ and $8.79{\pm}1.71ng/ml$, respectively). Mean $P_4$ levels on day 9 and 10 in cows and heifers did not differ significantly from their respective day 0 values and the lowest values were recorded on day 10 both in cows and heifers ($0.13{\pm}0.03$ and $0.14{\pm}0.02ng/ml$, respectively). Wide variations in individual pretreatment $E_2$ levels were observed both in the cows (range = 4-26, mean = $13.00{\pm}4.65pg/ml$) and heifers (range = 10-14, mean = $11.50{\pm}0.96pg/ml$). Thereafter also, $E_2$ levels in cows showed variation and reached a peak level ($53.50{\pm}2.99pg/ml$) on day 8. In heifers, peak mean $E_2$ level ($111.25{\pm}39.81pg/ml$) was recorded on day 1, followed by a non-significant decline on day 2, a significant fall on day 6 and a non-significant increase on day 9 and 10. However, mean $E_2$ levels on days 7 (p<0.05), 8 and 9 (p<0.01) were significantly higher in cows compared to heifers. The post-CIDR withdrawal mean highest $P_4$ and lowest $E_2$ levels coincided with the period when the majority of animals were induced to oestrus. CIDR and eCG treatment resulted in effective induction of oestrus with satisfactory pregnancy rates in true acyclic Sahiwal cows and heifers.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.281-302
• /
• 2014

Human beings have advanced to release instinctive desire. Among the human desires, sexual desire is classed as a basic desire with appetite and has been expressed in many ways from prehistoric times to present. Despite the social and ethical restriction, expression of sexual image has been evolved with change of time and medium's development. Thanks to inventing the photograph technique, Change of pornographic image has showed a dramatic aspect since early 20th century. The video which delivers message more directly than the picture boosted this change, and the animation has experimented the expression methods and techniques numerously exceeding the limit of realistic image which reappeared by the device. In this thesis, I want to discuss how human beings express sexual desire in animation based on society's sex culture, and analyzed Japanese pornographic animation as its obvious cases. Japanese pornographic animation should be interpreted as the result of culture and society system's history. Through Heian, Edo and early Meiji period, Japanese sex culture has been kept very openly and preposterously. Transformation, metamorphosis, pedophilia, tentacle sex and exposure of specific body parts that are frequently appear in Japanese animation can be interpreted by ancient Japanese open sex culture like Wakashu, polygamy, sleeping in mixed sex group and pederasty. These Japanese odd sex culture is hard to find elsewhere and settled as intrinsic sexual expression in Japanese animation. This situation was institutionally severed by European Modernization's force at the end of World War II in 20th century. However, it seems they have been keeping their influence in a proper form until now. In this study, I discussed that pornographic animation should be interpreted in a frame of cultural phenomenon by researching the series of procedure that ancient Japanese open sex culture has been changed by the system. Sexuality which is found in general Japanese animation was started from their history, and the dichotomous expression about women can be understood that it is bent by institutionally regulated sexual opinion. Japanese history and culture can be understood that it is transformed to the dichotomy that are simultaneously according freedom of eroticism to the pornographic animation, and the fear and irresistible temptation about the woman's body as the other.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.9 no.1
• /
• pp.9-16
• /
• 2023

Liposomes as drug delivery system have proved useful carrier for various disease, including cancer. In addition, perfluorocarbon cored microbubbles are utilized in conjunction with high-intensity focused-ultrasound (HIFU) to enable simultaneous diagnosis and treatment. However, microbubbles generally exhibit lower drug loading efficiency, so the need for the development of a novel liposome-based drug delivery material that can efficiently load and deliver drugs to targeted areas via HIFU. This study aims to develop a liposome-based drug delivery material by introducing a substance that can burst liposomes using ultrasound energy and confirm the ability to target tumors using PET imaging. Liposomes (Lipo-DOX, Lipo-DOX-Au, Lipo-DOX-Au-RGD) were synthesized with gold nanoparticles using an avidin-biotin bond, and doxorubicin was mounted inside by pH gradient method. The size distribution was measured by DLS, and encapsulation efficiency of doxorubicin was analyzed by UV-vis spectrometer. The target specificity and cytotoxicity of liposomes were assessed in vitro by glioblastoma U87mg cells to HIFU treatment and analyzed using CCK-8 assay, and fluorescence microscopy at 6-hour intervals for up to 24 hours. For the in vivo study, U87mg model mouse were injected intravenously with 1.48 MBq of ⁶⁴Cu-labeled Lipo-DOX-Au and Lipo-DOX-Au-RGD, and PET images were taken at 0, 2, 4, 8, and 24 hours. As a result, the size of liposomes was 108.3 ± 5.0 nm at Lipo-DOX-Au and 94.1 ± 12.2 nm at Lipo-DOX-Au-RGD, and it was observed that doxorubicin was mounted inside the liposome up to 52%. After 6 hours of HIFU treatment, the viability of U87mg cells treated with Lipo-DOX-Au decreased by around 20% compared to Lipo-DOX, and Lipo-DOX-Au-RGD had a higher uptake rate than Lipo-DOX. In vivo study using PET images, it was confirmed that ⁶⁴Cu-Lipo-DOX-Au-RGD was taken up into the tumor immediately after injection and maintained for up to 4 hours. In this study, drugs released from liposomes-gold nanoparticles via ultrasound and RGD targeting were confirmed by non-invasive imaging. In cell-level experiments, HIFU treatment of gold nanoparticle-coupled liposomes significantly decreased tumor survival, while RGD-liposomes exhibited high tumor targeting and rapid release in vivo imaging. It is expected that the combination of these models with ultrasound is served as an effective drug delivery material with therapeutic outcomes.

• Journal of the Korean Society of Radiology
• /
• v.82 no.5
• /
• pp.1258-1273
• /
• 2021

Purpose The balloon-stent technique (BST) has certain strengths as an assisted technique for the treatment of complex aneurysms. After Atlas release, the BST can be executed without an exchange maneuver of the balloon to the stent-delivery catheter. The purpose of this article is to share our experience with the BST using the Scepter-Atlas combination. Materials and Methods Device inspection led us to a simple method to avoid failure in loading Atlas to the Scepter. From March 2018 to December 2019, 57 unruptured distal internal carotid artery (dICA) aneurysms were treated with coil embolization; among which, 25 aneurysms in 23 patients were treated with BST. Clinical and angiographic data were retrospectively collected and reviewed. Results The technical success rate of the Scepter-Atlas combination increased from 50% to 100% after careful inspection. BST angiographic results were comparable to the stent-assisted coil (SAC) group treated during the immediately post-embolization same period (modified Raymond-Roy classification [MRRC] 1 & 2 84% in BST, 96.3% in SAC) and during short-term follow-up (MRRC 1 & 2 95.8% in BST, 88.4% in SAC). A small number of patients showed periprocedural complications, but none had clinical consequences. Conclusion BST using the Scepter-Atlas combination can provide an effective and safe method for the treatment of dICA aneurysms. Scepters can be used as delivery catheters for Atlas.