• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.231-238
• /
• 1986

This field experiment was undertaken to assess the effects of three levels of inclination ($10^{\circ}$, $20^{\circ}$ and $30^{\circ}$) and four rates of $N-P_2O_5-K_2O$ (0-0-0, 14-10-10, 28-25-25, and 42-40-40 kg/10a) on the hilly pasture concerning to establishment, forage yield and quality, and botanical composition in the mixed grass-clover sward set up on a new reclaimed woodland by an oversowing method. This part was concerned with the concentration and mutual balance of mineral nutrients in relation to grass tetany hazard. The results obtained were summarized as follows: 1. Concentration of exchangeable Mg, relative proportions of Mg to CEC, K, and Ca in soil were considerably below the critical level for good forage growth and prevention of grass tetany. These properties were rather worsened by increasing the inclination grade and the NPK rate. 2. Compared with the critical level for the likelihood of tetany (Mg < 0.2%, K > 2.5%, and K/(Ca+Mg) equivalent ratio > 2.2 in forages in DM basis), mean concentration of Mg in mixed forages turned out to range from 0.09 to 0.14%. 2.6% of K concentration and 2.5 of K/(Ca+Mg) equivalent ratio were shown to be at a normal NPK rate. The likelihood of grass tetany was generally enhanced by increasing the inclination grade and the NPK rate. 3. The increasing of the inclination grade and NPK rate rather aggravated the low Mg concentration and unbalanced mutual ratios of mineral nutrients, from which resulted the grass tetany hazard and the depression of forage growth. To prevent these two resulted factors, Mg fertilization on grassland and/or extra Mg supplement to dairy cattle needed to be carried out. 4. The Ca/P ratios in the mixed forages ranging from 1.0 to 2.0 were reduced by the increased rate of NPK, whereas the difference due to inclination grade was yet to be recognized.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.7-15
• /
• 2019

Purpose: The purpose of this study is to evaluate beam delivery accuracy for small sized lung SBRT through experiment. In order to assess the accuracy, Eclipse TPS(Treatment planning system) equipped Acuros XB and radiochromic film were used for the dose distribution. Comparing calculated and measured dose distribution, evaluated the margin for PTV(Planning target volume) in lung tissue. Materials and Methods : Acquiring CT images for Rando phantom, planned virtual target volume by size(diameter 2, 3, 4, 5 cm) in right lung. All plans were normalized to the target Volume=prescribed 95 % with 6MV FFF VMAT 2 Arc. To compare with calculated and measured dose distribution, film was inserted in rando phantom and irradiated in axial direction. The indexes of evaluation are percentage difference(%Diff) for absolute dose, RMSE(Root-mean-square-error) value for relative dose, coverage ratio and average dose in PTV. Results: The maximum difference at center point was -4.65 % in diameter 2 cm size. And the RMSE value between the calculated and measured off-axis dose distribution indicated that the measured dose distribution in diameter 2 cm was different from calculated and inaccurate compare to diameter 5 cm. In addition, Distance prescribed 95 % dose($D_{95}$) in diameter 2 cm was not covered in PTV and average dose value was lowest in all sizes. Conclusion: This study demonstrated that small sized PTV was not enough covered with prescribed dose in low density lung tissue. All indexes of experimental results in diameter 2 cm were much different from other sizes. It is showed that minimized PTV is not accurate and affects the results of radiation therapy. It is considered that extended margin at small PTV in low density lung tissue for enhancing target center dose is necessary and don't need to constraint Maximum dose in optimization.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.357-386
• /
• 2007

At present, thirteen Buddhist bells of Unified Silla are known to the world: Six in Korea, five in Japan and two other bells, and three out of them are impossible to make out its original form. Therefore, we divided the form of Unified Silla Buddhist bells based on the ten other bells, and we tried out to prove the manufacturing technology by the comparison of the research material of Uncheon-dong bell and existing research materials of other bells, in other to find their linkage based on the alloy elemental composition. We divided Unified Silla Buddhist bell into two types: Type I has symmetric apsaras and regular patterns on its face and it was made in early Silla period; type II has asymmetric apsaras and irregular pattern arrangement and made in late Silla period. In particular, Uncheon-dong Buddhist bells is very similar to Komyoji[光明寺] temple bell from ninth century in Japan. It is peculiar that the apsaras on Uncheon-dong bell play vertical music instruments that are never seen in Unified Silla Buddhist bell. Most of Unified Silla Buddhist bell are compounded with Cu-Sn or Cu-Sn-Pb system. From eighth and ninth century, bells were cast with even composition of copper, tin and lead, and the bronze alloy ratio was similar to the record in Gogonggi[考工記], Jurye[周禮], a book from ancient China. Particularly, Uncheon-dong bell is in a rare case of Cu-Sn-Pb-As system. As had been rarely used in Unified Silla Buddhist bells, so we presented the relative research materials. As has the same nature as Pb. Because As easily volatilize at high temperature, it is hard to use. But it has its merit of solidity and durability. Pb enhances fluidity and thereby expresses the patterns more distinct; As makes the bell stronger. The result of lead isotope ratio could not exactly reveal a concrete producing center. However, over the analysis of our samples, hereby we suggest Uncheon-dong bell was made of materials from just one ore deposit.

• Tunnel and Underground Space
• /
• v.31 no.5
• /
• pp.374-384
• /
• 2021

In this study, we propose a new approach for automatic fracture detection in CT scan images of rock specimens. This approach is built on top of two-stage object detection deep learning algorithm called Faster R-CNN with a major modification of using rotated bounding box. The use of rotated bounding box plays a key role in the future work to overcome several inherent difficulties of fracture segmentation relating to the heterogeneity of uninterested background (i.e., minerals) and the variation in size and shape of fracture. Comparing to the commonly used bounding box (i.e., axis-align bounding box), rotated bounding box shows a greater adaptability to fit with the elongated shape of fracture, such that minimizing the ratio of background within the bounding box. Besides, an additional benefit of rotated bounding box is that it can provide relative information on the orientation and length of fracture without the further segmentation and measurement step. To validate the applicability of the proposed approach, we train and test our approach with a number of CT image sets of fractured granite specimens with highly heterogeneous background and other rocks such as sandstone and shale. The result demonstrates that our approach can lead to the encouraging results on fracture detection with the mean average precision (mAP) up to 0.89 and also outperform the conventional approach in terms of background-to-object ratio within the bounding box.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.299-308
• /
• 2021

Fe(II) released from mining activities is precipitated as various Fe(III)-oxyhydroxides when exposed to an oxidizing environment including mine drainage. Ferrihydrite, one of the representative precipitated Fe(III) minerals, is easy to adsorb heavy metals and other pollutants due to the large specific surface area caused by very low crystallinity. Ferrihydrite is transformed to thermodynamically more stable goethite in the natural environment. Hence, information on the transformation of ferrihydrite to goethite and the related mobility of heavy metals in the acid mine drainage is important to predict the behaviors of those elements during ferrihydrite to goethite transition. The behaviors of heavy metals during the transformation of ferrihydrite to goethite were investigated for core samples collected from an AMD treatment system in the Heungjin-Taemaek coal mine by using X-ray diffraction (XRD), chemical analysis, and statistical analysis. XRD results showed that ferrihydrite gradually transformed to goethite from the top to the bottom of the core samples. Chemical analysis showed that the relative concentration of As was significantly high in the core samples compared with that in the drainage, indicating that As was likely to be adsorbed strongly on or coprecipitated with iron oxyhydroxide. Correlation analysis also indicated that As can be easily removed from mine drainage during iron mineral precipitation due to its high affinity to Fe. The concentration ratio of As, Cd, Co, Ni, and Zn to Fe generally decreased with depth in the core samples, suggesting that mineral transformation can increase those concentrations in the drainage. In contrast, the concentration ratio of Cr to Fe increased with depth, which can be explained by the chemical bond of iron oxide and chromate, and surface charge of ferrihydrite and goethite.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.67-76
• /
• 2022

This study aimed to determine the photosynthesis and growth characteristics of Peucedanum japonicum T. grown under aquaponics in a plant factory (AP) by comparing those grown under hydroponic cultivation system (HP). The AP system raised 30 fishes at a density of 10.6 kg·m^-3 in a 367.5 L tank, and at HP, nutrient solution was controlled with EC 1.3 dS·m^-1 and pH 6.5. The pH level ranged from 4.0 to 7.1 for the AP system and 4.0 to 7.4 for the HP system. The pH level in the AP began to decrease with an increase in nitrate nitrogen (NO₃-N) and lasted bellower than pH 5.5 for 15-67 DAT. It was found that ammonium nitrogen (NH₄-N) continued to increase even under low pH conditions. EC was maintained at 1.3 to 1.5 dS·m^-1 in both systems. The concentration of major mineral elements in the fish tank was higher than that of the hydroponics, except for K and Mg. There was no significant difference in the photosynthesis characteristics, but the PIABS parameters were 30.4% lower in the AP compared to the HP at the 34DAT and 12.0% lower at the 74DAT. There was no significant difference in the growth characteristics, but the petiole length was 56% longer in the leaf grown under the AP system. While there was no significant difference in the fresh and dry weights of leaf and root, the leaf area ratio was 36.43% higher in the AP system. All the integrated results suggest that aquaponics is a highly-sustainable farming to safely produce food by recycling agricultural by-products, and to produce Peucedanum japonicum as much as hydroponics under a proper fish density and pH level.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.999-1009
• /
• 2022

The Chuncheon Mullori area is an underprivileged area for water welfare that does not have a local water supply system. Here, water is supplied to the village by using a small-scale water supply facility that uses underground water and underground water as the source. To solve the problem of water shortage during drought and to prepare for the increasing water demand, a sand dam was installed near the valley river, and this facility has been operating since May 2022. In this study, in order to evaluate the reliability of water supply when a sand dam is assumed during a drought in the past, groundwater runoff simulation results using MODFLOW were used to generate inflow data from 2011 to 2020, an unmeasured period. After performing SWAT-K basin hydrologic modeling for the watershed upstream of the existing water intake source and the sand dam, the groundwater runoff was calculated, and the relative ratio of the monthly groundwater runoff for the previous 10 years to the monthly groundwater runoff in 2021 was obtained. By applying this ratio to the 2021 inflow time series data, historical inflow data from 2011 to 2020 were generated. As a result of analyzing the availability of water supply during extreme drought in the past for three cases of demand 20 m³/day, 50 m³/day, and 100 m³/day, it can be confirmed that the reliability of water supply increases with the installation of sand dams. In the case of 100 m³/day, it was analyzed that the reliability exceeded 90% only when the existing water intake source and the sand dam were operated in conjunction. All three operating conditions were evaluated to satisfy 50 m³/day or more of demand based on 95% reliability of water supply and 30 m³/day or more of demand based on 99% of reliability.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.371-388
• /
• 2023

A stratum with a complex composition and a distributed low-permeability soil layer is difficult to remediate quickly because the soil remediation does not proceed easily. For efficient purification, the permeability should be improved and the soil remediation agent (H₂O₂) should be injected into the contaminated section to make sufficient contact with the TPH (Total petroleum hydrocarbons). This study analyzed a method for crack formation and effective delivery of the soil remediation agent based on pneumatic fracturing, plasma blasting, and vacuum suction (the PPV method) and compared its improvement effect relative to chemical oxidation. A demonstration test confirmed the effective delivery of the soil remediation agent to a site contaminated with TPH. The injection amount and injection time were monitored to calculate the delivery characteristics and the range of influence, and electrical resistivity surveying qualitatively confirmed changes in the underground environment. Permeability tests also evaluated and compared the permeability changes for each method. The amount of soil remediation agent injected was increased by about 4.74 to 7.48 times in the experimental group (PPV method) compared with the control group (chemical oxidation); the PPV method allowed injection rates per unit time (L/min) about 5.00 to 7.54 times quicker than the control method. Electrical resistivity measurements assessed that in the PPV method, the diffusion of H₂O₂2 and other fluids to the surface soil layer reduced the low resistivity change ratio: the horizontal change ratio between the injection well and the extraction well decreased the resistivity by about 1.12 to 2.38 times. Quantitative evaluation of hydraulic conductivity at the end of the test found that the control group had 21.1% of the original hydraulic conductivity and the experimental group retained 81.3% of the initial value, close to the initial permeability coefficient. Calculated radii of influence based on the survey results showed that the results of the PPV method were improved by 220% on average compared with those of the control group.

• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.159-169
• /
• 2023

This study analyzed the factors affecting the opinions of life-sustaining treatment among the elderly in Korea. The study subjects were 10,097 people who responded to the survey on the condition of the elderly (2020), and using the SPSS 25.0 program, first, the demographic characteristics of the research subjects were identified through descriptive statistics and the average and normality of major variables were identified. Second, the chi-square was analyzed by conducting a cross-analysis of opinions on life-sustaining treatment according to the characteristics of the elderly. Third, a correlation analysis was performed to analyze the correlation between major variables. Fourth, the relative influence on the life-sustaining treatment of the elderly was identified through multiple regression analysis. The main research findings are as follows. First, 8,565 (84.8%) of the elderly were opposed to medical treatment (life-sustaining treatment) to save them even if they were unconscious or difficult to live. Second, as a result of cross-analysis on life-sustaining treatment for the elderly, the 𝑥² values of education level, health status, living together with children, and cost of living in old age were found to be significant. Third, the educational level of the elderly, living together with children, and the cost of living in old age were found to have statistically significant negative effects on life-sustaining treatment. Such research results indicate that the elderly with a high level of education oppose life-sustaining treatment compared to those with a low level of education. In addition, in the case of the elderly with traditional values who responded that one of their children should live with the elderly (parents), the ratio of people in favor of life-sustaining treatment was high, and in the case of the elderly with modern values who responded that they did not have to live together, the ratio of opposition to life-sustaining treatment was high. appeared to be high. In addition, in the case of the elderly with traditional values who responded that the burden of living expenses in old age should be shared between the state and society and their children, the proportion in favor of life-sustaining treatment was high. This high figure expressed the desire for well-dying. Based on these research results, the value system was re-examined as a factor influencing the elderly's opinion on life-sustaining treatment, and basic data for welfare policies for the elderly were provided.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1779-1790
• /
• 2023

Satellite-based fog detection algorithms are being developed to detect fog in real-time over a wide area, with a focus on the Korean Peninsula (KorPen). The GEO-KOMPSAT-2A/Advanced Meteorological Imager (GK2A/AMI, GK2A) satellite offers an excellent temporal resolution (10 min) and a spatial resolution (500 m), while GEO-KOMPSAT-2B/Geostationary Ocean Color Imager-II (GK2B/GOCI-II, GK2B) provides an excellent spatial resolution (250 m) but poor temporal resolution (1 h) with only visible channels. To enhance the fog detection level (10 min, 250 m), we developed a fused GK2AB fog detection algorithm (FDA) of GK2A and GK2B. The GK2AB FDA comprises three main steps. First, the Korea Meteorological Satellite Center's GK2A daytime fog detection algorithm is utilized to detect fog, considering various optical and physical characteristics. In the second step, GK2B data is extrapolated to 10-min intervals by matching GK2A pixels based on the closest time and location when GK2B observes the KorPen. For reflectance, GK2B normalized visible (NVIS) is corrected using GK2A NVIS of the same time, considering the difference in wavelength range and observation geometry. GK2B NVIS is extrapolated at 10-min intervals using the 10-min changes in GK2A NVIS. In the final step, the extrapolated GK2B NVIS, solar zenith angle, and outputs of GK2A FDA are utilized as input data for machine learning (decision tree) to develop the GK2AB FDA, which detects fog at a resolution of 250 m and a 10-min interval based on geographical locations. Six and four cases were used for the training and validation of GK2AB FDA, respectively. Quantitative verification of GK2AB FDA utilized ground observation data on visibility, wind speed, and relative humidity. Compared to GK2A FDA, GK2AB FDA exhibited a fourfold increase in spatial resolution, resulting in more detailed discrimination between fog and non-fog pixels. In general, irrespective of the validation method, the probability of detection (POD) and the Hanssen-Kuiper Skill score (KSS) are high or similar, indicating that it better detects previously undetected fog pixels. However, GK2AB FDA, compared to GK2A FDA, tends to over-detect fog with a higher false alarm ratio and bias.