• 대기
• /
• 제18권3호
• /
• pp.159-169
• /
• 2008

The characteristics of the typhoon's extratropical transition (ET) over the western North Pacific area were investigated using the cyclone phase space (CPS) diagram method suggested by Hart (2003). The data used in this study were the global data assimilation prediction system (GDAPS) and NCEP data set. The number of typhoons selected were 75 cases during 2002 to 2007, and the three parameters were analyzed : the motion relative thickness asymmetry of the storm (B), the upper thermal wind shear and the lower thermal wind shear. Comparing the best-track data provided by the Regional Specialized Meteorological Center /Tokyo, the time of the ET based on CPS was 2~6 hours earlier than the best-track data. And it was shown that the 400- km and 30 kt wind radius of storm for the CPS method were better agreement than the previous suggested radius 500- km.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2028-2038
• /
• 2003

High-speed feed drive systems have been widely used in the manufacturing and semiconductor industries. Specifications for high-speed systems require more advanced capabilities than conventional feed drive systems. It is necessary to devise special design concepts to achieve the level of performance for high-speed feed drive systems. In this paper, an integrated design method is proposed for high-speed feed drive systems in which the interactions between mechanical and electrical subsystems ought to be considered simultaneously during the design process. Based on the integrated design method, a nonlinear optimal design procedure of mechanical subsystems considering the Abbe and radius errors is accomplished through the design process of electrical subsystems satisfying the control stability and the saturation condition of actuators as well as the relative stability. Both mechanical and electrical parameters are considered as design variables. Simulations and numerical case studies show that the integrated design method of high-speed feed drive systems creates results satisfying the desired performances of mechatronic systems.

• 천문학회보
• /
• 제37권2호
• /
• pp.73.1-73.1
• /
• 2012

We use hydrodynamic simulations to study the physical properties of gaseous structures in barred galaxies and their relationships with the bar strength. We vary the bar mass fbar relative to the spheroidal component as well as its aspect ratio. We derive expressions for the bar strength Qb and the radius where the maximum bar torque occurs. When applied to observations, these expressions suggest that bars in real galaxies are most likely to have fbar = 0.25-0.5. Dust lanes approximately follow one of x1-orbits and tend to be more straight under a stronger and more elongated bar. A nuclear ring of a conventional x2 type forms only when the bar is not so massive or elongated. The radius of an x2-type ring is generally smaller than the inner Lindblad resonance, decreases systematically with increasing Qb, evidencing that the ring position is not determined by the resonance but by the bar strength. Nuclear spirals exist only when the ring is of the x2-type and sufficiently large in size. Unlike the other features, nuclear spirals are transient in that they start out as being tightly-wound and weak, and then due to the nonlinear effect unwind and become stronger until turning into shocks, with an unwinding rate higher for larger Qb.

• Archives of Plastic Surgery
• /
• 제48권1호
• /
• pp.84-90
• /
• 2021

Vascularized bone grafts (VBGs) are widely employed to reconstruct upper extremity bone defects. Conventional bone grafting is generally used to treat defects smaller than 5-6 cm, when tissue vascularization is adequate and there is no infection risk. Vascularized fibular grafts (VFGs) are mainly used in the humerus, radius or ulna in cases of persistent non-union where traditional bone grafting has failed or for bone defects larger than 6 cm. Furthermore, VFGs are considered to be the standard treatment for large bone defects located in the radius, ulna and humerus and enable the reconstruction of soft-tissue loss, as VFGs can be harvested as osteocutaneous flaps. VBGs enable one-stage surgical reconstruction and are highly infection-resistant because of their autonomous vascularization. A vascularized medial femoral condyle (VFMC) free flap can be used to treat small defects and non-unions in the upper extremity. Relative contraindications to these procedures are diabetes, immunosuppression, chronic infections, alcohol, tobacco, drug abuse and obesity. The aim of our study was to illustrate the use of VFGs to treat large post-traumatic bone defects and osteomyelitis located in the upper extremity. Moreover, the use of VFMC autografts is presented.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.27-35
• /
• 1999

링 공진기의 반경은 공진 주파수에 의해서 결정된다. 실제적으로 파자아의 정수 배인 원주를 갖는 링 공진기는 설계하고자 하는 공진 주파수에 맞게 설계하기가 어렵다. 본 논문에서는 결합 갭을 갖는 링 공진기가 원하는 공진 주파수에서 공진할 수 있도록 설계하는 방법을 제시한다. 전송선로 해석법을 이용하여 갭 크기에 따라 반경을 줄일 수 있는 관계식을 유도하고, 유전율에 따라서 반경을 결정할 수 있는 조건식을 제시한다. 새로운 방법에 의해 설계된 링 공진기는 크기 면에서 초기의 공진 주파수에 의해 설계한 링 공진기 크기의 1/3정도의 크기를 갖고, 초기에 설계하고자 하는 정확한 공진 주파수를 갖는다. $S_{11}$이 통과대역에서 많이 감쇠하는 특성을 얻기 위해서 링 공진기와 인접하는 결합선로를 T형으로 설계한다. 이러한 병렬 결합 선로의 캐패시턴스는 갭 캐패시턴스 보다 훨씬 적기 때문에 공진 주파수에 영향을 주지 않는다.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.128-133
• /
• 2013

본 논문에서는 RFIC 설계에 응용 가능한 인덕터의 Quality factor 및 Effective inductance를 비교 분석하기 위해 Octagonal 인덕터를 90nm CMOS 공정을 이용하여 제작하였다. 내부반경을 설계변수로 갖는 인덕터의 경우 내부반경이 증가함에 따라 Quality factor가 감소하고 Effective inductance의 값이 증가하였다. 회전수를 설계변수로 갖는 인덕터의 경우 금속의 회전수가 증가함에 따라 Quality factor의 값이 감소하고 Effective inductance의 값이 증가하는 것을 확인하였다. 따라서 RFIC 회로 설계에 있어서 인덕터의 구조는 Q-factor 및 inductance 각각의 상대적 중요도에 따라 선택 되어져야 된다고 할 수 있다.

• 대한치과교정학회지
• /
• 제20권1호
• /
• pp.111-122
• /
• 1990

To investigate the relationship of skeletal maturity among the normal occlusion group and each malocclusion groups, the author used hand and wrist X-ray of 133 Korean 13 year old boys (normal occlusion 30, Class I malocclusion 35, Class II malocclusion 35 and Class III malocclusion 33) and assessed their skeletal maturity. In this study, fourteen skeletal maturity stages were selected from; Radius, Hamate, Pisiform, Ulnar sesamoid of the metacarpophalangeal joint of the first thumb, proximal phalanges of the first, second and third finger, middle and distal phalanx of the third finger. The difference of skeletal maturity of each malocclusion groups in relative to normal occlusion group and that of each malocclusion groups were analyzed. The findings of this study can be summerized as follows: 1. Average skeletal maturity stage of each groups were MP3cap stage in normal occlusion group, H-2 stage in Class I malocclusion group, midstage between S and H-2 stage in Class II malocclusion group, MP3cap stage in Class III malocclusion group. 2. There was no significant difference in skeletal maturity of Class I malocclusion and Class III malocclusion groups in relative to normal occlusion group. 3. There was significant retardation of skeletal maturity in Class II malocclusion group in relative to normal occlusion group. 4. There was no significant difference in skeletal maturity between Class I and Class II malocclusion groups. 5. There was no significant difference in skeletal maturity between Class I and Class III malocclusion groups. 6. There was significant retardation of skeletal maturity in Class II malocclusion group in relative to Class III malocclusion group.

• 한국진공학회지
• /
• 제21권6호
• /
• pp.295-300
• /
• 2012

지름이 각각 10 mm와 20 mm인 피스톤과 진공장치를 이용해서 발생된 유량과 이온게이지의 압력을 측정하여 비교하는 방법으로 개발 중인 오일유량계의 성능을 예비 평가하였다. 큰 피스톤의 유량 발생 범위는 $1{\times}10^{-1}Pa{\cdot}L/s{\sim}1.2Pa{\cdot}L/s$이었고 작은 피스톤의 유량발생 범위는 $5.3{\times}10^{-1}Pa{\cdot}L/s{\sim}1.05Pa{\cdot}L/s$이었으며, 이 구간에서의 반복성과 직선성은 비교적 좋았다. 개발 중인 오일유량계는 국가 리크표준기로서 앞으로 표준리크를 교정하는데 활용할 계획이다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.65-86
• /
• 2000

Rare earth-doped ceria powders with a composition of Ce0.8R0.2O1.9(R=Yb, Y, Gd, Sm, Nd and La) were prepared by heating the oxalate coprecipitate. The green compacts began to shrink at 600$^{\circ}$-700$^{\circ}C$. The relative density after the sintering at 1200$^{\circ}$ and 1400$^{\circ}C$ became higher for the higher green density. The samples were densified above 98% relative density by the sintering ant 1600$^{\circ}C$ for 4 h and the grain sizes (4.7-7.6$\mu\textrm{m}$) showed a tendency to become larger with increasing ionic radius of doped-rare earth element. In the intial stag of sintering at 700$^{\circ}$-800$^{\circ}C$, the dominant mass transport process changed from lattice diffusion to grain boundary diffusion to grain boundary diffusion with heating time. The porosity during the intermediated and final stage of the sintering at 1200$^{\circ}$ and 1400$^{\circ}C$ decreased by the mass transport through lattice diffusion with grain growth.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.161-168
• /
• 1999

A series of centrifuge model tests were performed in order to investigate the behaviors of various tunnel linings. A 1/100-scaled aluminum and hydrostone horseshoe tunnel linings with a radius km, height km were buried in a depth of C/D=3 with dry Joomunjin standard sand, the relative density of which was 86%. Bending moments and thrusts along the tunnel circumference were measured by 12 strain gages. Earth pressures in soil and on lining were estimated by pressure transducers, ground surface settlements at center and edges by using LVDTs. Average Ko(coefficient of earth pressure at rest) was 0.39 for the model sand. The structural behaviors of lining depended on its damaged conditions. But, as a rule, on the crown, the tensile circumferential strain of lining occurred at the inner surface, and the compressive at the outer surface, then positive bending moment was created at the crown. The circumferential strain of the inner surface on the springline was tensile, and the outer compressive, so negative bending moment was measured at the springline. For hydrostone linings, cracks initiated at the inner surface on the crown, and the outer on the springline over average 40g.