• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.418-423
• /
• 2005

In designing underground structure such as tunnels, estimating geotechnical characteristics of the ground is one of the most important and difficult tasks. In this paper, a methodology that can identify geotechnical parameters using only field-measured relative convergence displacements is presented. By using only relative convergence measurement data, inevitable errors in absolute convergence estimation can be avoided and in turn the parameter estimation process can be simplified. The methodology utilizes sensitivity relationship between static displacement measurements and geotechnical parameters. The feasibility and applicability of the proposed methodology is verified via a 3-d numerical example of a tunnel structure.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.99-108
• /
• 2005

One of the most important and difficult tasks in designing underground structure is the estimation of engineering properties of the ground. The main purpose of this study is to propose a new back-analysis technique in tunnelling to estimate geotechnical parameters around a tunnel. In this study, the Extended Bayesian Method, which appropriately combines objective information with subjective one, is adopted to optimize engineering parameters. By using only relative convergence data measured during tunnelling as input values in back-analysis, inevitable errors in absolute convergence estimation are excluded and 3-dimensional numerical analysis is applied to consider a trend of relative convergence occurrence. Finally, 3-dimensional back-analysis technique using relative convergence is proposed and evaluated using a hypothetical site.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.792-802
• /
• 2008

If a tunnel is constructed below the groundwater level, the groundwater flow will occur inducing the seepage force toward the tunnel and will result in the increase of tunnel convergence. The longitudinal deformation during tunnel excavation will also be increased due to seepage pressure. A back-analysis methodology in underwater tunnel was proposed in this study based on the relative longitudinal deformation measured in-situ. Geotechnical parameters can be estimated utilizing the proposed method where the prior estimate as well as the measured convergence can be reasonably combined by adopting the Extend Bayesian Method.

• Communications of the Korean Mathematical Society
• /
• v.25 no.2
• /
• pp.313-325
• /
• 2010

General models for the relaxed proximal point algorithm using the notion of relative maximal accretiveness (RMA) are developed, and then the convergence analysis for these models in the context of solving a general class of nonlinear inclusion problems differs significantly than that of Rockafellar (1976), where the local Lipschitz continuity at zero is adopted instead. Moreover, our approach not only generalizes convergence results to real Banach space settings, but also provides a suitable alternative to other problems arising from other related fields.

• The Journal of Information Systems
• /
• v.24 no.2
• /
• pp.139-162
• /
• 2015

Purpose This study reviews technology acceptance research in the information system area and consumer behavior research in the marketing area, sets characteristics of convergence products, personality of consumers and communication channels as main concepts and demonstrates their effects on 'relative level of attraction' and 'intent to adoption. Design/methodology/approach The survey was conducted against potential consumers who have the intent to purchase electric communication media products that provides a variety of functions and service, such as a smart TV, a tablet PC and a smart watch. All items were adapted from previous literature and revised as appropriate the purpose of this study and measured on a 7-point Likert scale with answer choices ranging from "strongly disagree" (1) to (7) "strongly agree." Totally, 300 respondents participated in the survey. Out of the 276 respondents, incomplete or invalid 24 were discarded. With them, SPSS 18.0 and AMOS 20.0 for structural equation modeling were used for the analysis. Findings Main findings are as followed;- First, it is found that 'interrelationship of technology' and 'functional diversification' of convergence products has positive effects on relative level of attraction. Second, perceived behavior control has significant effects on the intent to adoption convergence products. Third, communication through mass media has positive effects on making potential consumers feel attraction about products while there is no relationship with the intent to a. On the other hands, it is demonstrated that there is no relationship influential relationship between communication through interpersonal channels and relative level of attraction while communication through interpersonal channels has significant effects on the intent to adoption.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.387-394
• /
• 2019

This paper presents an analytical study on the strength and stiffness of various types of truss structures. The applied models are triangular-like opened truss-wall triangular model (OTT), closed truss-wall triangular model (CTT), opened solid-wall triangular model (OST), and hypercube models defined as core-filled or core-spaced cube. The models are analyzed by numerical model analysis using DEFORM 2D/3D tool with AISI 304 stainless steel. Then, the ideal solutions for stiffness and strength are defined. Finally, the relative elastic modulus of the core-spaced model is obtained as 0.0009, which is correlated with the cancellous bone for the relative density range of 0.029-0.03, and the relative elastic modulus for the core-filled model is obtained as 0.0015, which is correlated with cancellous bone for the relative density range of 0.035-0.036. For the relative compressive yield strength, the OTT reasonably agrees with the cancellous bone for the relative density of 0.042 and the relative compressive strength of 0.05. The CTT and OST are in good agreement at the relative density of 0.013 and the relative compressive yield strength of 0.002. The hypercube models can be used for the cancellous bone for stiffness, and the triangular models can be used for the cancellous bone for strength. However, none of the models can be used to replace the compact bone because it requires much higher stiffness and strength. In the near future, compact bone replacement must be further studied. In addition, previously mentioned models should be developed further.

• Environmental and Resource Economics Review
• /
• v.19 no.3
• /
• pp.571-595
• /
• 2010

This research applies an panel data stationarity and stochastic convergence test developed by Carrion-i-Silvestre et al. (2005), which has the advantage of considering multiple structural breaks and the presence of cross-section dependence in order to investigate the hypothesis that relative emission $CO_2$ per capita stochastically converge for 11 Asian countries from 1971~2007. We find that relative emission $CO_2$ per capita is stationary after the structural breaks and cross-section dependence are introduced into the model. We also investigate whether Environmental Kuznets Curve (EKC) hypothesis exists in 11 Asian countries. For EKC test, using the panel cointegration tests of Banerjee and Carrion-i-Silvestre (2006) and Westerlund and Edgerton(2007), we find that relative emission $CO_2$ per capita and relative GDP per capita are cointegrated. However EKC hypothesis in 11 Asian countries is not supported.

• East Asian Economic Review
• /
• v.21 no.3
• /
• pp.201-230
• /
• 2017

This paper studies the long-run behavior of relative price dispersion among cities in Korea with a special emphasis on heterogeneous transitional patterns of price level dynamics. Formal statistical tests indicate considerable evidence for rejecting the null of relative price level convergence among the majority of cities over the sample period of 1985-2015. The analysis of gravity model suggests that the effect of transportation costs on intercity price level differentials is limited, while other socioeconomic factors, such as income, input factor prices, demographic structure, and housing price growth, play key roles in accounting for persistent regional price level disparities. Individual price levels are found to be better explained by a multiple-component model, and the deviations from PPP may be attributed to distinct stochastic common trends that are characterized by income and demographic structure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.287-291
• /
• 2010

Purpose: The aim of this study was to compare binocular functions such as near point of convergence (NPC), AC/A ratios, heterophoria, accommodation, accommodation lag, positive relative accommodation (PRA), negative relative accommodation (NRA), positive relative convergence (PRC), negative relative convergence (NRC) in normal subjects and convergence insufficiency. Methods: 86 subject (male n=45, female n=41, mean $age{\pm}SD=23.27{\pm}2.85$ years) without amblyopia, strabismus, and ocular pathology were studied. Forty three patients each group were classified as normal subjects and convergence insufficiency group based on AC/A ratio and far and near phoria. Binocular function of the two groups was measured using phoropter. r. Results: The values between normal subjects and convergence insufficiency were 5.71 cm and 7.07 cm for NPC, 5.28 and 2.81 for Heterophria AC/A, 0.92 exo/3.36 exo and 2.17 exo/10.84 exo for far and near phoria, 15.49/23.30/13.30 and 13.50/20.02/9.09 for PRC, respectively. However, there were no significant differences between normal subjects and convergence insufficiency for accommodative amplitude, accommodative lag, PRA, NRA, BI vergence test, BO vergence test, NRC. Conclusions: Both groups were a significant difference for cover test, NPC, Heterophria AC/A, far and near phoria, break point of PRC, and recovery point of PRC.

• Journal of applied mathematics & informatics
• /
• v.22 no.1_2
• /
• pp.351-360
• /
• 2006

In this paper, we develop an inexact-Newton method for solving nonsmooth operator equations in infinite-dimensional spaces. The linear convergence and superlinear convergence of inexact-Newton method under some conditions are shown. Then, we characterize the order of convergence in terms of the rate of convergence of the relative residuals. The present inexact-Newton method could be viewed as the extensions of previous ones with same convergent results in finite-dimensional spaces.