• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.14-25
• /
• 1995

The main contribution of this paper can be summarized in two items as follws. Firstly, a modelling of mobile communication channel with Rayleigh fading characteristics is presented. Actual signal environments can be approximated as being real measurements by a proper mathematical representation of fluctuation of channel parameters due to Doppler effect, that is determined by the relative speed between transmitter and receiver, and noises, that vary at each sampling time. Secondly, an alternative procedure of synthesizing an adaptive equalizers is presented for recovering original signals that have been corrupted through the modelled channel. In order to compute the optimal tap coefficients for a high speed data(512 k symbol/sec) on a real-time basis, the CGM that guarantees fast and stable convergency is adopted during the training period of each frame. The coefficients obtained by the CGM are used as initial values for the LMS algorithm to trace the optimal coefficients during the data period that vary at each sampling time due to the mobility and noise at the receiver. Using the modelling presented in this paper, distributions of received signal power in various signal environments are demonstrated. The performance of the eqalizer proposed in this paper is shown as a function of BER under the various signal circumstances of mobile communications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.730-740
• /
• 1996

Boiling heat transfer coefficients of pure refrigerants (R22, R32, R134a, R125, R290, and R600a) and refrigerant mixtures (R32/Rl34a, R290/ R600a, and R32/R125) are measured experimentally and compared with Chen's correlation. The test section is a seamless stainless steel tube with inner diameter of 7.7mm and uniformly heated by applying electric current directly to the tube. Heat fluxes range from 10 to 30kW$^2$. Mass fluxes are set to 424 ~ 742kg/m$^{2}$s for R22, R32, R134a, R32/R134a, and R32/Rl25 ; 265 ~ 583kg/m$^{2}$s for R290, R600a, and R290/R600a. Heat transfer coefficients depend strongly on heat flux at a low quality region and become independent as quality increases. Convective boiling term in the Chen's correlation predicts experimental data of the pure refrigerants fairly well (relative error of 12.1% for the data of quality over 0.2). The correlation for pure substances overpredicts the heat transfer coefficients for nonazeotropic refrigerant mixtures.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.381-386
• /
• 2008

Adatom kinetics on the surfaces of Co overlayers, prepared on the W(110) surface, was studied with scanning tunneling microscopy. By counting the number-density of the adatom-islands, we estimated the ratio of adatom diffusion coefficients. The ratio $D_{W(110)}:D_{1ML\;Co}:D_{2ML\;Co}$ was measured to be 1 : 125 : 33000 at room temperature, where $D_{W(110)},\;D_{1ML\;Co}$, and $D_{2ML\;Co}$ are the diffusion coefficients on bare W(110) surface, on one-monolayer Co overlayer, and on two-monolayers Co overlayers, respectively. An increased diffusion coefficient on two-ML Co overlayers, relative to that on one-ML Co overlayers, was explained with the heteroepitaxial strain effect.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.609-614
• /
• 2002

Watermarking is embedding a digital signal called as watermark into images to claim the ownership. In this paper, a new digital watermarking algorithm based on DCT (Discrete Cosine Transform) which enhances invisibility and robustness is proposed to improve contentional digital watermarking method using DCT. In the proposed method, it is possible to enhance invisibility and robustness using watermark reordering in which the relative significance of original DCT coefficients can be preserved in watermarked DCT coefficients, and the distortions of original DCT coefficients can be minimized. The experimental results show that the proposed method improves invisibility approximately 9～12[dB] and is more robust to various attacks than the conventional method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.373-376
• /
• 2000

We investigate some properties of commonly used residual plots in linear regression and provide some systematic insight into the relationships among the plots. We discuss three issues of linear regression in this stream of context. First of all, we introduce two graphical comparison methods to display the variance inflation factor. Secondly, we show that the role of a suppressor variable in linear regression can be checked graphically. Finally, we show that several other types of standardized regression coefficients, besides the ordinary one, can be obtained in residual plots and the correlation coefficients of one of these residual plots can be used in ranking the relative importance of variables.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.8 no.2
• /
• pp.45-56
• /
• 1983

This paper presents a generalized fuel choice model in which restrictive constraints on cross-price coefficients as Baughman-Joskow-FEA Logit Model need not be imposed, but all demand elasticities are uniquely determined. The model is applied to estimating aggregate energy demand and fuel choices for the residential and commercial sector. The structural equations are estimated by a generalized least squares procedure using national-level EPB, KDI, BK, KRIS, MOER data for 1965 and 1980, and other related reports. The econometric results support the argument that “third-price” and “fourth-price” coefficients should not be constrained in estimating relative market share models. Furthermore, by using this fuel choice model, it has forecasted energy demands by fuel sources in, the residential and commercial sector until 1991. The results are turned out good estimates to compare with existing demands forecasted from other institutes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.183-190
• /
• 1993

For the efficient control of photochemical smog materials, the researches on the change patterns of photochemical smog precursors are indispensable. In this study, a time-series analysis was performed for the auto-monitoring data of Kwanghwamun and Jamsil stations in 1990, and the change patterns of photochemical smog materials were studied. Especially, auto-correlation coefficients were analyzed to investigate the cyclic characteristics of pollutants in question and cross-correlation coefficients to investigate the correlations between pollutants adjusted for time lag and between $O_3$ and meteorological factors. Results of researches are as follows: First, in the case of NO and $NO_2$ intimately related to human activities, 12-hour cycle was prevalent. But $O_3$ showed 24-hour cycle. Second, NO showed a relatively high correlation with $O_3$ and usually developed into $O_3$ 5 to 7 hours later. Third, temperature, insolation intensity, and wind speed showed a positive correlation with $O_3$ while relative humidity a negative correlation.

• Computers and Concrete
• /
• v.10 no.6
• /
• pp.587-607
• /
• 2012

The purpose of this research is to propose a design technique of concrete mix proportions satisfying service life through genetic algorithm (GA) and neural network (NN). For this, thirty mix proportions and the related diffusion coefficients in high performance concrete are analyzed and fitness function for diffusion coefficient is obtained considering mix components like w/b (water to binder ratio), cement content, mineral admixture (slag, flay ash and silica fume) content, sand and coarse aggregate content. Through averaging the results of 10 times GA simulations, relative errors to the previous data decrease lower than 5.0% and the simulated mix proportions are verified with the experimental results. Assuming the durability design parameters, intended diffusion coefficient for intended service life is derived and mix proportions satisfying the service life are obtained. Among the mix proportions, the most optimized case which satisfies required concrete strength and the lowest cost is selected through GA algorithm. The proposed technique would be improved with the enhancement of comprehensive data set including wider the range of diffusion coefficients.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.1
• /
• pp.10-18
• /
• 2002

The objective of present study is to analyze a concentric triple-passage heat exchanger for an optimal design of a continuous hot steel-tube cooling system, where a hot-steel tube line is passing through an antioxidant gas with a constant speed. Velocities and temperatures of the inert gas flowing between inner and outer tubes are calculated theoretically for laminar and numerically for turbulent flow regimes. From their profiles Nusselt numbers and friction factors are calculated (or various ratios of inner/outer tube radii and relative velocities. With these Nusselt numbers triple-passage heat exchangers are investigated for their thermal characteristics. It is shown that heat transfer coefficients based on ratios of average heat fluxes from inner and outer tubes might result in great errors for the temperature distributions of the flows, since local heat transfer coefficients for flows through an annulus are dependent on local wall heat flux ratios.

• Communications for Statistical Applications and Methods
• /
• v.7 no.1
• /
• pp.37-46
• /
• 2000

We investigate some properties of commonly used residual plots in linear regression and provide some systematic insight into the relationships among the plots. We discuss three issues of linear regression in this stream of context. First of all we introduce two graphical comparison methods to display the variance inflation factor. Secondly we show that the role of a suppressor variable in linear regression can be checked graphiclly. Finally we show that several other types of standardized regression coefficients besides the ordinary one can be obtained in residual plots and the correlation coefficients of one of these residual plots can be used in ranking the relative importance of variables.