• 제목/요약/키워드: Relative Acceleration

검색결과 279건 처리시간 0.024초

Recovery of spectral absolute acceleration and spectral relative velocity from their pseudo-spectral counterparts

  • Papagiannopoulos, George A.;Hatzigeorgiou, George D.;Beskos, Dimitri E.
    • Earthquakes and Structures
    • /
    • 제4권5호
    • /
    • pp.489-508
    • /
    • 2013
  • Design spectra for damping ratios higher than 5% have several important applications in the design of earthquake-resistant structures. These highly damped spectra are usually derived from a 5%-damped reference pseudo-acceleration spectrum by using a damping modification factor. In cases of high damping, the absolute acceleration and the relative velocity spectra instead of the pseudo-acceleration and the pseudo-velocity spectra should be used. This paper elaborates on the recovery of spectral absolute acceleration and spectral relative velocity from their pseudo-spectral counterparts. This is accomplished with the aid of correction factors obtained through extensive parametric studies, which come out to be functions of period and damping ratio.

EFFICIENT COMPUTATION OF THE ACCELERATION OF THE CONTACT POINT BETWEEN ROTATING SURFACES AND APPLICATION TO CAM-FOLLOWER MECHANISM

  • LEE K.
    • International Journal of Automotive Technology
    • /
    • 제7권1호
    • /
    • pp.115-120
    • /
    • 2006
  • On a rotating contact surface of arbitrary shape, the relative velocity of the contact point sliding between the surfaces is computed with the basic geometries of the rotating surfaces, and the acceleration of the contact point between the contact surfaces is computed by using the relative velocity of the contact point. Thus the equation for the acceleration constraint between the contact surfaces in muitibody dynamics is not coupled with the parameters such as the relative velocity of the contact point. In case of the kinematic analysis, the acceleration of the contact point on any specific instant may also be efficiently computed by the present technique because the whole displacement of a full cycle need not be interpolated. Employing a cam-follower mechanism as a verification model, the acceleration of the contact point computed by the present technique is compared with that computed by differentiating the displacement interpolated with a large number of nodal points.

해양플랜트산업 경쟁력 강화를 위한 조선기자재산업 고도화에 관한 연구 (A Study on Accelerating Marine Equipments Industry for Enforcing Competitiveness of the Offshore Plants Industry)

  • 하창승;정대현
    • 수산해양교육연구
    • /
    • 제27권5호
    • /
    • pp.1369-1379
    • /
    • 2015
  • This study attempted an AHP analysis through interview with experts in the industries and questionnaire survey on recognition of organization members and future strategic development direction in order to upgrade shipbuilding equipment industries to marine plant equipment industries. Key research results are as follows. First, according to analysis on relative priority between three aspects on acceleration of shipbuilding equipment industries, importance was shown in the order of acceleration of internal competence, acceleration of manufacturing technology, and acceleration of supply chain, which means that the aspect on acceleration of internal competence had relatively higher importance. Second, as for relative importance of detailed item evaluation per respective aspect, it was found that development of core competencies was high from the aspect on acceleration of internal competence, higher value-addition was high from the aspect on acceleration of manufacturing technology, and IT infrastructure construction was high from the aspect on acceleration of supply chain.

개수로흐름 해석에서 운동량방정식의 특성 (Characteristics of the Momentum Equation in Open Channel Flow)

  • 전민우;조용수
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.1111-1115
    • /
    • 2008
  • The relative magnitudes of the individual terms of the momentum equation are analyzed and compared by the analytical methods in open channel flow. The temporal variations of each term(local acceleration term, convective acceleration term, pressure force term, gravity force term, and friction force term) are analyzed for the influence factors to runoff expressed by the parameters of the momentum equation, stream slopes and roughness coefficients. The magnitudes of each term vary with the channel characteristics, especially when the roughness coefficients are dominant or for the mild stream slopes the pressure term can not be negligible. As a result of the characteristics of momentum equation in open channel flow, the acceleration terms are very small compared with the other terms. The magnitudes of local acceleration and convective acceleration offsets each other. The peak time of each term except the gravity term coincides with inflection point of the hydrograph rising limb each other.

  • PDF

노면가진소음의 전달경로 파악;다중기여도함수 및 연결부위의 상대가속도 이용 (Transfer Path Identification of Road Noise;Using Multiple Coherence Function and Relative Acceleration)

  • 김영기;배병국;김양한;김광준;김명규
    • 한국자동차공학회논문집
    • /
    • 제5권4호
    • /
    • pp.84-92
    • /
    • 1997
  • Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

  • PDF

HDD에서 상대습도, 디스크 가속도, 정지시간이 슬라이더-디스크 인터페이스의 마찰대전 발생에 미치는 영향 (Effect of Relative Humidity, Disk Acceleration, and Rest Time on Tribocharge Build-up at a Slider-Disk Interface of HDD)

  • 황정호;이대영;이재호;좌성훈
    • Tribology and Lubricants
    • /
    • 제22권2호
    • /
    • pp.59-65
    • /
    • 2006
  • In hard disk drives as the head to disk spacing continues to decrease to facilitate recording densities, slider disk interactions have become much more severe due to direct contact of head and disk surfaces in both start/stop and flying cases. The slider disk interaction in CSS (contact-start-stop) mode is an important source of particle generation and tribocharge build-up. The tribocharge build-up in the slider disk interface can cause ESD (electrostatic discharge) damage. In turn, ESD can cause severe melting damage to MR or GMR heads. The spindle speed of typical hard disk drives has increased in recent years from 5400 rpm to 15000 rpm and even higher speeds are anticipated in the near future. And the increasing disk velocity leads to increasing disk acceleration and this might affect the tribocharging phenomena of the slider/disk interface. We investigated the tribocurrent/voltage build-up generated in HDD, operating at increasing disk accelerations. In addition, we examined the effects with relative humidity conditions and rest time. We found that the tribocurrent/voltage was generated during pico-slider/disk interaction and its level was about $3\sim16pA$ and $0.1\sim0.3V$, respectively. Tribocurrent/voltage build-up was reduced with increasing disk acceleration. Higher humidity conditions $(75\sim80%)$ produced lower levels tribovoltage/current. Therefore, a higher tribocharge is expected at a lower disk acceleration and lower relative humidity condition. Rest time affected the charge build-up at the slider-disk interface. The degree of tribocharge build-up increased with increasing rest time.

An absolute displacement approach for modeling of sliding structures

  • Krishnamoorthy, A.
    • Structural Engineering and Mechanics
    • /
    • 제29권6호
    • /
    • pp.659-671
    • /
    • 2008
  • A procedure to analyse the space frame structure fixed at base as well as resting on sliding bearing using total or absolute displacement in dynamic equation is developed. In the present method, the effect of ground acceleration is not considered as equivalent force. Instead, the ground acceleration is considered as a known value in the acceleration vector at degree of freedom corresponding to base of the structure when the structure is in non-sliding phase. When the structure is in sliding phase, only a force equal to the maximum frictional resistance is applied at base. Also, in this method, the stiffness matrix, mass matrix and the damping matrix will not change when the structure enters from one phase to another. The results obtained from the present method using absolute displacement approach are compared with the results obtained from the analysis of structure using relative displacement approach. The applicability of the analysis is also demonstrated to obtain the response of the structure resting on sliding bearing with restoring force device.

상대 가속도를 이용한 기초 가진을 받는 다자유도 기계 시스템의 동적 해석 (Dynamic Analysis for Mechanical Systems with Multi-Degree of Freedom under Base Excitation Using Relative Acceleration)

  • 이태원
    • 한국기계가공학회지
    • /
    • 제19권3호
    • /
    • pp.36-41
    • /
    • 2020
  • Mechanical systems installed in transport devices, such as vehicles, airplanes, and ships, are mostly subject to translational accelerations at the joints during operations. This base acceleration excitation has a large influence on the performance of the system, therefore, its response must be well analyzed. However, the existing methods for dynamic analysis of structures have some limitations in use. This study presents a new numerical method using relative acceleration to solve these limitations. If the governing equation of motion is linear and the mass matrix, the damping matrix, and the stiffness matrix are constant over time in the finite element analysis, the proposed method can be applied to the transient behavior analysis and the harmonic response analysis of the structure. Because it is not necessary to introduce a virtual mass and the rigid body motions are removed from the analysis, it is possible to use not only the direct integration method in the time domain but also the mode superposition method to obtain the dynamic responses. This paper demonstrates with three examples how the present method is suitable for the dynamic analysis of a structure with multi-degree of freedom.

건조사질토의 동적거동 -수직진동에 의한 연구 (The Behavior of Dry Sand under Dynamic Loading -A Study on the Vertical Vibration)

  • 김수일;정상섬;안영훈
    • 한국지반공학회지:지반
    • /
    • 제11권4호
    • /
    • pp.37-48
    • /
    • 1995
  • 본 연구에서는 수직가속도를 일으키는 진동실험을 통하여 정규진동 및 무작위 진동시의 건조 사질토에 대한 동적거동을 분석하였다. 실험결과로부터 진동가속도와 상대밀도의 관계곡선을 제안하였으며, 여러가지 상재하중하에서의 거동특성을 규명하였다. 실험에는 완전건조된 사질토를 사용하였으며, 입경별로 4개의 시료로 나누고, 현장입경상태를 재현한 시료를 더하여 총 5개의 시료를 사용하였다. 정규진동실험의 경우, 진동진폭은 0.4mm~0.6mm로 유지하고 진동주파수를 3~40Hz 범위에서 변화시키면서 가속도에 따른 시료의 상대밀도 변화를 측정하였다. 무작위진동실험의 경우, 무작위파 발생기를 이용하여 무작위진동파와 10~50Hz 범위의 정규진동파가 조합된 합성파를 발생시키고, 가속도센서로 가속도를 측정하면서 상대밀도의 변화를 측정하였다. 본 연구결과, 수직가속도만으로 사질토를 94%~99%의 상대밀도까지 다질 수 있었으며, 최대 상대 밀도를 발생시키는 수직가속도는 시료가 최소 건조 단위 중량일 때의 간극비와 최대 건조 단위 중량일 때의 간극비 차이에 비례하는 것을 알 수 있었다. 또한, 상재하중을 가하지 않은 경우가 상재하중을 가한 경우보다 시료의 상대밀도변화가 크게 나타탔으며, 상재하중이 클수록 상 대밀도의 변화가 일어나는 가속도가 커짐을 알 수 있었다.

  • PDF

주행패턴의 상대 가속도에 따른 중소형 자동차의 온실가스 및 대기오염물질 배출 특성 (Greenhouse Gas and Pollutant Emission from Light-Duty Vehicles Regarding the Relative Positive Acceleration)

  • 이태우;길지훈;박경균;박준홍;박용희;홍지형;이대엽
    • 한국자동차공학회논문집
    • /
    • 제18권4호
    • /
    • pp.31-39
    • /
    • 2010
  • Although driving patterns strongly influence greenhouse gas and air pollutant emission rate from light duty vehicles, emission measurements have been mainly based on chassis dynamometer testing with one standard driving pattern. And there has been limited work on quantifying the independent effect of driving parameters on emission rate because of multidimensional nature of real-world driving pattern. The objective of this study is to obtain the quantitative effect of relative positive acceleration (RPA) on vehicle emission rate. RPA has been used to define the occurrence of acceleration demanding large amounts of power in certain driving distance and shown to be a significant affecting parameter for real-world emission rate. 40 driving patterns have been developed with fixed driving parameters to investigate independent effect of RPA. For the same values of average vehicle speed and power, the trend in carbon dioxide emission rate and fuel consumption with respect to RPA is very clear. Emission rate of nitrogen oxide and particulate matter also increase with respect to RPA, but the trend is less clear. Carbon dioxide emission from diesel vehicle appear to be more affected by high accelerations compared to that from gasoline vehicle because of high intake air restriction during acceleration caused by turbocharger and intercooler. The results have implications for the possible reduction of environmental effects through better traffic planning and management, driver education and car design.