• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.59-68
• /
• 1994

The effects of silt and clay, water temperature and salinity on the metabolic activities: rates of respiration, filtration and nitrogen excretion in the clam, Mactra veneriformis, were investigated in ranges of $0{\sim}250ppm,\;15{\sim}25^{\circ}C\;and\;10{\sim}30\%0$ respectively. The weight specific respiration rate decreased with shell length and significantly declined at lower temperatures and lower salinity levels. Average respiration rates, filtration rates and ammonia excretion rates of the clam groups declined as water temperature was lowered. The respiration rate(R) and the filtration rate(F) decreased as the concentration of silt and clay(C) increased, the relationships between the two parameters were expressed as a regression line, R=a+b LogC and LogF=a+b LogC, respectively. On the rearing experiment treated with 50ppm of silt and clay, the relationship between the accumulative mortality(M) and the elapsed day(T) was $M=0.0186T^{2.7965}$, and the median lethal time was calculated at 16.8 days. From the rearing experiment, both rate of respiration and ammonia nitrogen excretion of experimental groups and control groups decreased with elapsed days, the rates of experimental groups, especially declined more compared with those of the control groups.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.234-241
• /
• 1975

Reproductive cycle of Haliotis discus hannai Ino was studied based on the samples which were collected in Yeosu area from January, 1973 to December, 1974. Particular emphasis was paid on the seasonal variation of gonad maturity factor, coefficieot of gonad maturity, fatnesss, and relationship of gonad weight to growth of the abalone. seasonal fluctuation of water temperature and induction of artificial spawnings were also checked. The abalone of this area spawns twice a year: spring spawning(early May-late July) and Autumn spawning(early September-late November). peak spawning occurs from late May to middle of June for spring spawning: it occurs from late September to early November for Autumn spawning. Gonad maturity factor was closely related to the spawning seasons. For the spring spawning Gonad maturity factor reached to its maximum value as 18.84 in April; for the Autumn spawning it reached to its maximum value as 22.65 in September. Annual minimum value was 12.65 in January. Annual maximum values of coefficient of gonad maturity were 44.10 in May and 49.05 in September and the annual minimum was 10.09 in January. Fatnesswas highest in July as 0.221 and it was lowest in October as 0.1058. Ratios of shell length to gonad weight were formulated as follows : $$In\;September\;GW=0.000003710SL^{3.7860}$$ $$In\;January\;GW=0.000021198SL^{2.8564}$$ $$Annual\;mean\;GW=0.00000005013SL^{4.2273}$$ Relations of total weight to gonad weight were formulated as follows : In September GW=0.1918TW-4.9231 In January GW=0.0992TW-0.1759 Annual maan GW=0.1568UW-3.5256.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2016

The purpose of this study is to induce the ductile behavior of the Ultra High Perfomance Concrete Reinforced I beam by substituting the part of steel fiber for bundle of reinforcing bars. Experiment of flexural behavior of the Ultra High Performance Concrete I shaped beam with the combination of the steel fiber and bundle of reinforcement bars was carried out. The volume fractions of steel fiber are 0%, 0.7%, 1%, 2%. The bundle of reinforcing bars and prestressing wire are used to restrain the concrete in compression zone. Length of bundle of reinforcing bar and prestressing wire is the one of test factors. The 9 Reinforced UHPC I shaped beam were made with these test factors. Not only steel fiber but also bundle of longitudinal reinforcing bar has effect to induce the ductile behavior of Reinforced UHPC I beam. The combination of 0.7% or 1.0% steel fiber and bundle of reinforcing bar showed the effective ductile behavior of I beam. The relationship of load-deflection and the crack pattern indicate the usefulness of the bundle of the longitudinal bar which has small diameter with close arrangement each other.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.10-17
• /
• 2020

The recent earthquake in Korea caused large and small damages to many school building. School building is an important building that is used as a shelter in the event of disaster. Among the seismic retrofit methods, the internal steel braced frame type method is used for its relatively easy construction and excellent performance. In this study, the maximum shear force and displacement were compared and examined by applying the brace frame to existing concrete school buildings. As a result, we verified the adequacy of the analytical model and compared and examined the effect of brace-height ratio on the span of the existing school buildings. The adequacy of the maximum shear force and displacement relationship can be confirmed in the model with a length of 0.3. In addition, seismic frame was applied to the actual non-seismic reinforced concrete school building, and the seismic performance was evaluated by nonlinear static analysis(Push-over analysis) according to the ratio of brace-height. As a result, the increase of the brace-height according to the brace-height ratio has the effect of increasing the maximum shear force and maximum load at the performance point. But the collapse of the braced frame due to the increase in the lateral stiffness occurred, indicating that seismic retrofit according to the proper brace-height is necessary. Therefore, in the seismic retrofit design of brace frame of existing school building, it is necessary to select the proper brace-height after retrofit analysis according to the brace-height ratio.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.646-652
• /
• 2004

The objective of this study was to determine the acute effect of trimetazidine (TMZ) on the pre-fatigue, fatigue and post-fatigue contractile characteristics and tension-frequency relationships of isolated rat diaphragm muscle. Muscle strips were taken from the ventral-costal aspects of the diaphragm muscle of rats killed by decapitation. The muscle strips were suspended in organ baths containing Krebs solution, with a gas mixture of 95% $O_2$ and 5% $CO_2$ at $37^{\circ}C$ and pH 7.35-7.45. After determining the thermoregulation and optimum muscle length the muscles were subjected to direct supramaximal stimulation with 0.05 Hz frequency square pulses for periods of 0.5 msec to obtain control values. After adding $5{\times}10^{-6}{\;}and{\;}5{\times}10^{-5}$ M trimetazidine solution to the respective bath media, the contractile parameters of the muscles were recorded. The contractile parameters were also recorded for both the trimetazidine and tri-metazidine-free media after application of the high frequency fatigue protocols. Later, the tension-frequency relationship was determined by applying stimulating pulses of 10, 20, 50 and 100 Hz to the muscle strips. Whilst the twitch tension obtained from the $5{\times}10^{-6}{\;}and{\;}5{\times}10^{-5}$ M trimetazidine media showed numerical increases compared to that of the controls, these were not statistically significant (p>0.05). The contraction time exhibited a dose dependent increase (p<0.001), whilst the contraction and relaxation rates did not differ significantly. The isometric contraction forces obtained with the different stimulating frequencies showed a significant increase in the tetanic contraction only at 100 Hz (p<0.05). A comparison of the pre- and post-fatigue twitch tensions in the trimetazidine media showed the post- fatigue twitch tensions to be significantly higher than those of the pre-fatigue contraction forces (p<0.05). In the $5{\times}10^{-6}{\;}and{\;}5{\times}10^{-5}$ M trimetazidine media the increases in the post-fatigue contraction force were 22 and 30%, respectively. These results demonstrated that in isolated rat diaphragm muscle, TMZ significantly limited the mechanical performance decrease during fatigue. It is our opinion that trimetazidine contributed to the observed fatigue tolerance by eliminating the factors of fatigue, due to preservation of intracellular calcium homeostasis, provision of the ATP energy levels needed by ATPase dependent pumps and especially by keeping the intracellular pH within cer-tain limits.

• Korean Journal of Ichthyology
• /
• v.20 no.4
• /
• pp.263-271
• /
• 2008

The maturity and spawning of Korean flounder Glyptocephalus stelleri were investigated using samples randomly collected in the East Sea of Korea from May 2005 to September 2008. Gonadosomatic index began to increase in December and reached a maximum between March and May. After spawning it began to decrease from June. The spawning period was March to June, and the main spawning period was April to May. Annual reproductive cycles of this species can be divided into four successive stages; immature stage (July~November), maturing stage (December~February), mature stage (March~April) and spent stage (May~June). The fecundity ranged from 15,146 eggs at 24.1 cm (TL) to 101,491 eggs at 38.1 cm (TL). The relationship between total length (TL) and fecundity (F) can be expressed as $F=0.0004TL^{3.449}$ ($R^2=0.663$), with F increasing with TL. The TL at 50% group maturity ($TL_{50%}$) was estimated to be 25.6 cm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.4
• /
• pp.135-139
• /
• 2015

$Bi_2Te_3-Bi_2Se_3$ alloy which is typical n-type thermoelectric material were grown by traveling heater method (THM) technique. We investigate the effect of the composition of $100-x(Bi_2Te_3)-x(Bi_2Se_3)$ and doping of n-type dopants such as $SbI_3$ and $CdCl_2$. Maximum figure of merit of $Bi_2Te_3-Bi_2Se_3$ alloy was observed with $CdCl_2$ 0.1 wt% (Z: $2.73{\times}10^{-3}/K$) and $SbI_3$ 0.05 wt% (Z: $2.29{\times}10^{-3}/K$). Deviation along the length of $Bi_2Te_3-Bi_2Se_3$ ingot grown by THM method is low, which indicates that the ingot is very homogenized. Also we observed the close relationship of between anisotropy ratio and dopant in the $90(Bi_2Te_3)-10(Bi_2Se_3)$ alloys. And we confirmed the fact that anisotropy ratio exerts thermoelectric performance in $Bi_2Te_3$ based n-type thermoelectric material.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.4
• /
• pp.641-662
• /
• 2010

Through the comparative studies on Korean and Chinese ethnobanks in the U.S., this research finds the difference in the social capital between Korean and Chinese American economy and reinterprets the social capital in overseas Chinese. In many ethnic studies, the ethnobanks in the U.S. are thought as the main drive of the economic prosperity in the ethnic communities. For the success of these ethnobanks, the relationship banking of these ethnobanks are contrasted with the arms-length banking of the mainstream U.S. banks. However there are the differences both in performance and business strategies even among different ethnobanks. Contrary to the Korean ethnic banks having much portion of business loans, Chinese ethnic banks have stressed real-estate loans in their loan portfolio. This research regards the differences of business strategies and performance of these ethnobanks as the result of the different social, cultural contexts in each ethnic community. From these finings, we can improve the understanding of the concept of social capital in overseas Chinese economy.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.15-24
• /
• 2001

In order to achieve a desirable tooth movement, it is of great importance to control the M/F ratio and to know the location of the center of resistance. The purpose of this study was to locate the center of resistance and the axis of rotation, and to estimate the stress distribution in the periodontal ligament with experimental model. After preparing a model of an upper canine with a simulated periodontal ligament and alveolar bone, the force and moment were applied. The tooth movement was traced using measuring device with LVDTs(Linear variable differential transformers) that can measure three dimensional tooth movement in real time. The results were as follows. 1. The location of center of resistance by transverse force was $29\%$ of root length measured from alveolar crest to apex regardless of force magnitude. The position of the center of resistance is more coronal than that of two-dimensional model($42\%$). 2. The center of resistance and the axis of rotation coincide when couple moment was applied. 3. As the magnitude of moment increases, tooth tends to extrude irrespective of the direction of the moment. 4. The relationship between location of force and axis of rotation (a x b = $49.6\;mm^2$) was obtained. A tooth movement can be predicted through this formula. 5. The centers of rotation by transverse force were plotted linearly.

• Journal of Korean Academy of Nursing
• /
• v.11 no.1
• /
• pp.45-63
• /
• 1981

This study was done to determine the relationship between the anxiety levels of hospitalized psychiatric patients and various influencing variables. The purpose of this study was to determine factors that may help hospitalized psychiatric patients to experience lower levels of anxiety in relation to changing situations and provide the basic data for a dynamic approach which is important in the field of modern psychiatric nursing that understands and analyses the meaning of patients behavior. The anxiety may produce stress, which is a common experience among all human beings. Patients may merely feel uncomfortable in the state of mild anxiety, however, the severe state could be an obstacle to treatment and recovery from disease. The anxiety of the psychiatric patient is a factor which greatly influencing the patient's behavior, so his disorderd behavior is an expression of defence or pathologically fixed behavior. According the psychiatric patient's anxiety at the time of admission is the concern of the health team. The nurse's special concern has to do with understanding and supporting the patient and meeting his individual needs by frequent close contact during the entire hospitalization period, compared to other teamembers the nurse's responsibility in this regard is greated. So this study emphasizes the necessity of creating conditions these, but above all the psychiatric nurse should create a therapeutic environment by not only regarding the patient's behavior or symptoms but understanding the meaning of them. The subjects of this study were 57 psychiatric patients selected from the K neuropsychiatric hospital located in Kunsan city. Data were collected twice from the same patients within a 24 hour period after admission and 10 days after admission. (September 18th to November 8th, 1980). The data collected method was through direct interview, and the interview time was 20 minutes for each patient. Data analysis included Item Analysis & Internal Consistency Reliability Tests, Percentages, t-test, analysis of variance and stepwise multiple regression analysis. The findings of this study were as follows. A. Test of Hypothesis a. Hypothesis 1 :“The anxiety level of psychiatric patients within 24 hours after admission will be higher than those of the same patients 10 days after admission,”was accepted. (t = 3. 15 ; p < 0.005) b. Hypothesi 2:“The more the number of admissions the higher the level of anxiety related to two categories”, was accepted. (affective anxiety: F = 5.50, p < 0.005, Somatic anxiety: F = 9.12, p <.