• 제목/요약/키워드: Reject

검색결과 601건 처리시간 0.027초

Gabor 특징에 기반한 이동 및 회전 불변 지문인증 (Translation- and Rotation-Invariant Fingerprint Authentication Based on Gabor Features)

  • 김종화;조상현;성효경;최홍문
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
    • /
    • pp.901-904
    • /
    • 2000
  • A direct authentication from gray-scale image, instead of the conventional multi-step preprocessing, is proposed using Gabor filter-based features from the gray-scale fingerprint around core point. The core point is located as a reference point for the translation invariant matching. And its principal symmetry axis is detected for the rotation invariant matching from its neighboring region centered at the core point. And then fingerprint is divided into non-overlapping blocks with respect to the core point and features are directly extracted form the blocked gray level fingerprint using Gabor filter. The proposed fingerprint authentication is based on the Euclidean distance between the corresponding Gabor features of the input and the template fingerprints. Experiments are conducted on 300${\times}$300 fingerprints obtained from a CMOS sensor with 500 dpi resolution, and the proposed method could lower the False Reject Rate(FRR) to 18.2% under False Acceptance Rate(FAR) of 0%.

  • PDF

달걀, 사과 및 배 섭취가 음성의 음향학적 파라미터에 미치는 효과 (The effects of egg, apple, and pear consumption on voice - acoustic measurements -)

  • 안종복;정옥란
    • 대한음성학회:학술대회논문집
    • /
    • 대한음성학회 2002년도 11월 학술대회지
    • /
    • pp.145-149
    • /
    • 2002
  • This study was performed to find out changes in acoustic measurements of voice after eating egg, apple and pear. Ten college students vocalized /a/ before and after eating egg, apple and pear. Dr. Speech was utilized to obtain changes of subjects's acoustic measurements. A t-test was peformed to determine acoustic changes of voice before and after eating egg, apple and pear. No significant difference was observed in acoustic measurements before and after eating egg, apple and pear. However, the subjects seemed to show some improvements in Jitter, HNR, and NNE in the order of egg, apple, and pear even though they did not reach a statistical significance. It was concluded that a more systematic research paradigm is needed in order to objectively reject or substantiate a variety of conceptions on food items and their effects on voice.

  • PDF

중학생이 지각한 가족체계유형과 분리개별화 (Family System Types and The Separation-Individuation Procedures Recognized Middle School Students)

  • 이희자;최수경
    • 대한가정학회지
    • /
    • 제37권8호
    • /
    • pp.15-28
    • /
    • 1999
  • This research was carried out to examine the family system types and the separation-individuation procedures, which seriously affect the mental development of middle school students. The research analysed the rate of separation-individuation in each family system types, as well. The resets of this study are as follows: 1. The midrange family was 61.1% among the four family system types, recognized by the middle school students. 2. Most of the middle school students were suffering from the separation-individuation procedures. And the most afflicted hardship was the dependency denial, which was followed by the reject expectancy and self-centeredness. 3. The girl students were more deeply affected by the family system types than boyhood. Therefore girl students were much more intimate with family and made very stagnant progress on the separation-individuation procedures .

  • PDF

Remarks on correlated error tests

  • Kim, Tae Yoon;Ha, Jeongcheol
    • Journal of the Korean Data and Information Science Society
    • /
    • 제27권2호
    • /
    • pp.559-564
    • /
    • 2016
  • The Durbin-Watson (DW) test in regression model and the Ljung-Box (LB) test in ARMA (autoregressive moving average) model are typical examples of correlated error tests. The DW test is used for detecting autocorrelation of errors using the residuals from a regression analysis. The LB test is used for specifying the correct ARMA model using the first some sample autocorrelations based on the residuals of a tted ARMA model. In this article, simulations with four data generating processes have been carried out to evaluate their performances as correlated error tests. Our simulations show that the DW test is severely dependent on the assumed AR(1) model but isn't sensitive enough to reject the misspecified model and that the LB test reports lackluster performance in general.

외장형 HEAT PIPE 가 장착된 정지궤도 위성 패널의 열해석 (THERMAL ANALYSIS OF SURFACE HEAT PIPE INSTALLED PANEL OF GEOSTATIONARY SATELLITE)

  • 전형열;김정훈
    • 한국전산유체공학회지
    • /
    • 제11권3호
    • /
    • pp.8-13
    • /
    • 2006
  • The north panel of a geostationary satellite is used as one of the main radiators, on which communication equipment or bus equipment are installed. The thermal control of panel is designed by using embedded heat pipes and surface heat pipes (or external heat pipes) to spread out heat dissipated from equipment all over the radiator evenly and finally to reject the heat to the space through the radiator efficiently. This panel is also divided by several areas based on the operating temperature and dissipation of equipment in order to increase heat rejection capability of radiator. The thermal analysis is carried out for the hot case, Winter Solsitce EOL (End Of Life), in order to validate thermal design of the panel utilized 6 surface heat pipes and 8 embedded heat pipes. The sensitivity studies for the heat pipe failure case and no heat pipe case are performed and compared to its normal state. The heat transport capability of heat pipe is also obtained from these calculations.

A Study on an Anti-Rolling System Design of a Ship with the Flaps

  • Kim, Young-Bok
    • Journal of Mechanical Science and Technology
    • /
    • 제18권8호
    • /
    • pp.1312-1318
    • /
    • 2004
  • Roll stabilization systems for ships are employed to increase comfort for passengers, maintain full working capabilities for members of the crew and prevent cargo damage. In this paper, we have investigated the usefulness of active stabilizing system to reduce ship rolling under disturbances, using varied reaction of the flaps. In the proposed anti-rolling system for a ship, the flaps as the actuator are installed on the stern to reject rolling motion induced by disturbances such as wave. The action induced by flaps depends on power of disturbances and can take the ship balance. Especially, in this study we define the system parameters under the given system structure and design the controller to evaluate the usefulness of the proposed system.

수중 음향 측정을 위한 새로운 임계치 함수에 의한 TI 웨이블렛 잡음제거 기법 (Translation-invariant Wavelet Denoising Method Based on a New Thresholding Function for Underwater Acoustic Measurement)

  • 최재용
    • 한국소음진동공학회논문집
    • /
    • 제16권11호
    • /
    • pp.1149-1157
    • /
    • 2006
  • Donoho et al. suggested a wavelet thresholding denoising method based on discrete wavelet transform. This paper proposes an improved denoising method using a new thresholding function based on translation-invariant wavelet for underwater acoustic measurement. The conventional wavelet thresholding denoising method causes Pseudo-Gibbs phenomena near singularities due to the lack of translation-invariant of the wavelet basis. To suppress Pseudo-Gibbs phenomena, a denoising method combining a new thresholding function based on the translation-invariant wavelet transform is proposed in this paper. The new thresholding function is a modified hard-thresholding to each node according to the discriminated threshold so as to reject unknown external noise and white gaussian noise. The experimental results show that the proposed method can effectively eliminate noise, extract characteristic information of radiated noise signals.

자기부상열차 시스템에서 적분형 슬라이딩 모드 제어기를 이용한 부상억제력 제거 (Suppression of the Disturbance Force in The Magnetically Levitated Train System Using Integral Sliding Mode Controller)

  • 이준호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.722-726
    • /
    • 2007
  • In this paper we deal with a design of the integral sliding mode controller to suppress the disturbance force acting on the suspension system of the magnetically levitated train system. One of the important factors that cause the disturbance force acting on the suspension system comes from the low propulsion speed of linear induction motor. In this paper integral sliding mode controller is employed to reject the disturbance force produced by the propulsion system of the linear induction motor. In order to show the effectiveness of the designed controller a dynamic simulation is utilized and the sliding mode controller without integral compensator is compared with the proposed integral sliding mode controller to suppress the disturbance force.

  • PDF

이중 학습에 의한 선형동기모터의 위치제어 (Position Control of Linear Synchronous Motor by Dual Learning)

  • 박정일;서성호;울루구벡
    • 한국정밀공학회지
    • /
    • 제29권1호
    • /
    • pp.79-86
    • /
    • 2012
  • This paper proposes PID and RIC (Robust Internal-loop Compensator) based motion controller using dual learning algorithm for position control of linear synchronous motor respectively. Its gains are auto-tuned by using two learning algorithms, reinforcement learning and neural network. The feedback controller gains are tuned by reinforcement learning, and then the feedforward controller gains are tuned by neural network. Experiments prove the validity of dual learning algorithm. The RIC controller has better performance than does the PID-feedforward controller in reducing tracking error and disturbance rejection. Neural network shows its ability to decrease tracking error and to reject disturbance in the stop range of the target position and home.

형광 공초점 주사 현미경의 측정 강도 향상을 위한 반사 광학계의 제안 및 설계 (Proposal and design of reflecting optical system to improve detection intensity in fluorescence confocal scanning microscopy)

  • 강동균;서정우;권대갑
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.187-190
    • /
    • 2002
  • Confocal microscopy is very popular technology in bio-medical inspection due to its ability to reject background signals and to measure very thin slide of thick specimens, which is called optical sectioning. But intensity of detected signal in fluorescence type confocal microscopy is so small that only 0.2% of emitted fluorescence light can be detected in the best case. In this paper, we proposed the reflecting optical system to improve the detection intensity and designed the optical system by optimal design method. At the end of the paper, we analyzed the characteristics of the proposed reflecting optical system.

  • PDF