• International Journal of Ocean System Engineering
• /
• v.2 no.1
• /
• pp.50-56
• /
• 2012

This study investigates flow fields and energy dissipation due to regular wave interaction with a perforated vertical breakwater, through velocity data measurement in a two-dimensional wave tank. As the waves propagate through the perforated breakwater, the incoming wave energy is reflected back to the ocean, dissipated due to very turbulent flows near the perforations and inside the chamber, and transmitted through the perforations of the breakwater. This transmitted energy is further reduced due to the presence of the perforated back wall. Hence most of the energy is either reflected or dissipated in the vicinity of the structure, and only a small amount of the incoming wave energy is transmitted through the structure. In this study, particle image velocimetry (PIV) technique was employed to measure two-dimensional instantaneous velocity fields in the vicinity of the structure. Measured velocity data was treated statistically, and used to calculate mean flow fields, turbulence intensity and turbulent kinetic energy. For investigation of the flow pattern, time-averaged mean velocity fields were examined, and discussed using the cross-sections through slot and wall for comparison. Flow fields were obtained and compared for various cases with different regular wave conditions. In addition, turbulent kinetic energy was estimated as an approach to understand energy dissipation near the perforated breakwater. The turbulent kinetic energy was distributed against wave height and wave period to see the dependence on wave conditions.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.441-463
• /
• 2009

FTA is acting as a central axis to accomplish the worldwide trade liberalization as FTA has been globally spreading with competition. As the global economic depression and the trend of new protectionism are getting grave, and the trade liberalization of GATT and WTO is getting delayed, FTA is spread as an alternative. FTA is often called as RTA: Regional Trade Agreement(regional free trade agreement) which takes place mainly around the neighbor nations or regular districts, and these days, it is tending towards agreements between long distant nations, so, it's not limited to the regular districts. Among the FTA agreement items, in addition to the customs abolition, the opening and investment liberalization of service market like finance, communication etc., intellectual property rights are included in the government's target range. Korea also is actively proceeding FTA conclusion. Korean government has concluded the agreements with Singapore, european nations beginning from Chile concluded in 2003, and is proceeding more the negotiations with Japan, Canada, Mexico, India etc. Now in 2009, FTA of Korea-United States is actually waiting for just the passage of assembly ratification. But, if FTA becomes effective, because our domestic market should be entirely opened, it is expected that the blow against our domestic agricultural field which is weak, compared with that of the United States, a nation of worldwide agricultural products, is not an ordinary one. According to it, we need a whole plan to cope with, so, the purpose of this study is to suggest the strategy by comparing and analysing the Korean agricultural competitive power, and to find the other development stratagem.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.253-260
• /
• 2005

Recently, the storms which hit Korean Peninsula are getting bigger, and the damages from the storms are wide spreaded. Thus, and approach with disaster prebention to offshore area and/or opened island area is neccessary. The existing wave design parameter was calculated with linear regular wave models inputting deep water design wave or wind sources. so it wasn't able to deal with wind-induced waves, interactions with waves, and redistribution of wave energy simultaneously. In this study, we made numerical simulation with SWAN(Simulation Waves Nearshore) Model which can consider development of waves and winds and their interference. The result from this model shows much different with those from existing model's. so the result from this study, especially in this modeling area, could be used for harbor design and coastal disaster prevention field in the future.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.579-583
• /
• 2004

A new and extendable highway should be planned and budgeted by estimating the total construction cost on the basis of the precise cost data. However, the demolition or disjointing cost could not reflect construction site condition sufficiently because it was simply estimated by multiplying the highway structure installation cost by the regular ratio($10\~70\%$) specified in the Korea Standard Estimate. The regular ratio for estimating of demolition and disjointing cost was calculated by not actual construction cost data but subjective experiences of field manager. Therefore, the reliance of the estimated demolition or disjointing cost has been declined. The primary objective of this study is to purpose the standard for estimating proper demolition or disjointing cost of relevant items through various site analysis and survey, and to investigate on the propriety of ratio-unit price method for estimating demolition and disjointing cost.

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.19-32
• /
• 2001

The purpose of this study is to determine aesthetical characteristics of the Korean traditional wedding dress for women by analyzing such dresses'aesthetical senses. For the purpose, the study showed four types of the dress, jukyee, whalot, weonsam and private weonsam and their photographed stimuli to subjects and then obtained data using the seven scale measures of meaning differentiation consisting of 25 pairs of adjective words. Results of the study are described as follows; Aesthetical senses shown in the Korean traditional dressing dress for women included six factors in total, among which attractiveness was found as the main factor, followed by chastity. For the four types of the dress, whalot adpated revelation as its main factor while the remaining three types, or jukyee, weonsam and private weonsam were found having dignity as their main factors. Adjective words which largely accounted for aesthetical senses included uncomfortable, warn, chaste, intellectual, bright, unique, regular, luxurious, classical, ornamental and beautiful suggesting that the Korean traditional wedding dress for women is somewhat unfunctional, but high in attractiveness and aesthetic beauty and has a better classical harmonization of dignity and revelation. Aesthetical senses were most different according to nationality(Korean and Japan) when they were analyzed in terms of nationality, gender and whether of specialization or non-specialization. Japanese people had unique and interesting senses while Korean people, chaste, calm and delicate aesthetical senses. According to gender, men revealed free senses and women, classical ones. According whether of specialization or non-specialization those who specialized in a related field had more unique, straight, regular, luxurious and interesting aesthetical senses that those who did not specialize.

• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.26-31
• /
• 2013

In nuclear power plant, anchor bolts for pressurizer supports are sufficiently used in terms of safety reason, but field inspections have reported that some bolts exceed the limit of their allowable hardness. Because the high level of hardness may lead to failures due to the stress corrosion or fracture toughness, a regular inspection is required for the bolts in nuclear power plant. Thus, this research measures the hardness of bolts currently used in pressurizer supports and then estimates maximum allowable stresses preventing failures by stress corrosion and fracture toughness. Using the ANSYS program, the stresses of the bolts in the regular condition and accidental condition have been calculated, and the possible maximum stress has been compared with the estimated allowable stresses. From the results, the stresses of bolts in the accidental condition satisfy the allowable safety stress from the stress corrosion failure. However, in the future, it shall be needed to consider the reflection of the structure assembling method on the assembling procedure to ensure the pressurizer integrity during maintenance period time.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.179-202
• /
• 2014

This study was carried out to reduce the number of marine accidents on versatile small ships and to minimize the casualties. The study looked into the compulsory education systems regarding embarkation on small ships such as the Korean Marine Officers Act, conducted a survey targeting on the education receivers to suggest problems, and drew a conclusion. Conclusions are as follows. First, it is needed to give education opportunities in the system by increasing the recipients of the Ships Officers Act, and to simplify the compulsory education by separating similar courses from the education regulated by the Korean Marine Officers Act, and by establishing integrated courses suitable to each size and facility of ships. Second, in cases where the compulsory education courses of different purpose of ships by other legislations are similar, it is necessary to expand the scope of the inter-education so that corresponding year's education is exempted. Third, by classifying the education ares, the education courses should be based on case studies and the audiovisual or field education that correlates relevant expertise should be managed within a reasonable time frame. Fourth, it is needed to enhance the education effect by converting the regular education courses to practical courses by different ships for safe navigation, and is also needed to review the system so that special courses for safe navigation can be carried out in each region on a regular basis by expanding both human and financial support of special institutions.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.274-280
• /
• 2017

Generally, global performance analysis in offshore platforms is performed using potential-based numerical tools, which neglect hydrodynamic viscous effects. In comparison with the potential theory, computational fluid dynamics (CFD) methods can take into account the viscous effects by solving the Navier-Stokes equation using the finite-volume method. The open-source field operation and manipulation (OpenFOAM) C++ libraries are employed for a finite volume method (FVM) numerical analysis. In this study, in order to apply CFD to the global performance analysis of a hull-mooring coupled system, we developed a numerical wave basin to analyze the global performance problem of a floating body with a catenary mooring system under regular wave conditions. The mooring system was modeled using a catenary equation and solved in a quasi-static condition, which excluded the dynamics of the mooring lines such as the inertia and drag effects. To demonstrate the capability of the numerical basin, the global performance of a barge with four mooring lines was simulated under regular wave conditions. The simulation results were compared to the analysis results from a commercial mooring analysis program, Orcaflex. The comparison included the motion of the barge, catenary shape, and tension in the mooring lines. The study found good agreement between the results from the developed CFD-based numerical calculation and commercial software.

• The Plant Pathology Journal
• /
• v.32 no.5
• /
• pp.414-422
• /
• 2016

Eucalyptus dieback disease, caused by Cylindrocladium scoparium, has occurred in last few years in large Eucalyptus planting areas in China and other countries. Rapid, simple, and reliable diagnostic techniques are desired for the early detection of Eucalyptus dieback of C. scoparium prior to formulation of efficient control plan. For this purpose, three PCR-based methods of nested PCR, multiplex PCR, loop-mediated isothermal amplification (LAMP) were developed for detection of C. scoparium based on factor 1-alpha (tef1) and beta-tubulin gene in this study. All of the three methods showed highly specific to C. scoparium. The sensitivities of the nested PCR and LAMP were much higher than the multiplex PCR. The sensitivity of multiplex PCR was also higher than regular PCR. C. scoparium could be detected within 60 min from infected Eucalyptus plants by LAMP, while at least 2 h was needed by the rest two methods. Using different Eucalyptus tissues as samples for C. scoparium detection, all of the three PCR-based methods showed much better detection results than regular PCR. Base on the results from this study, we concluded that any of the three PCR-based methods could be used as diagnostic technology for the development of efficient strategies of Eucalyptus dieback disease control. Particularly, LAMP was the most practical method in field application because of its one-step and rapid reaction, simple operation, single-tube utilization, and simple visualization of amplification products.

• Smart Structures and Systems
• /
• v.25 no.3
• /
• pp.369-384
• /
• 2020

A wavefield sparse reconstruction technique based on compressed sensing is developed in this work to dramatically reduce the number of measurements. Firstly, a severely underdetermined representation of guided wavefield at a snapshot is established in the spatial domain. Secondly, an optimal compressed sensing model of guided wavefield sparse reconstruction is established based on l₁-norm penalty, where a suite of discrete cosine functions is selected as the dictionary to promote the sparsity. The regular, random and jittered undersampling schemes are compared and selected as the undersampling matrix of compressed sensing. Thirdly, a gradient projection method is employed to solve the compressed sensing model of wavefield sparse reconstruction from highly incomplete measurements. Finally, experiments with different excitation frequencies are conducted on an aluminum plate to verify the effectiveness of the proposed sparse reconstruction method, where a scanning laser Doppler vibrometer as the true benchmark is used to measure the original wavefield in a given inspection region. Experiments demonstrate that the missing wavefield data can be accurately reconstructed from less than 12% of the original measurements; The reconstruction accuracy of the jittered undersampling scheme is slightly higher than that of the random undersampling scheme in high probability, but the regular undersampling scheme fails to reconstruct the wavefield image; A quantified mapping relationship between the sparsity ratio and the recovery error over a special interval is established with respect to statistical modeling and analysis.