• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.53-62
• /
• 2000

Under severe lateral loads, ductile moments-resisting reinforced concrete frames will be subjected to large loads and displacements. Thus, large deformation and shear stree are occurred at the beam-column joints which are the most critical region in ductile moments-resisting system. The purpose of this study was to investigate the shear strength of beam-column connection using high strength concrete. Four subassemblies were designed 2/3 scale of read structures and tested. The obtained results are as follows. 1) The transverse beams increase the shear resistance and ductility of joint, 2) The slab was contributed to increase of the flexural capacity of the beam, but was not contributed to increase the joint ductility under cyclic loads. 3) The shear stress factors. given by the ACI code would be modified in evaluating the shear strength of beam-column joints of frame which were constructed with high-strength concrete.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.416-425
• /
• 1993

To investigate the characteristics of the merged jet arising from the interaction of two opposing curved wall jets over a circular cylinder in still air, mean velocity, Reynolds stresses, triple moments and integral length scale were measured using hot-wire anenometry. The turbulent kinetic energy and shear stress budget were evaluated using the measured data. The variations of the Reynolds stresses, the triple moment and integral length scale are severe in the interaction region. The pressure diffusion terms are found to be very large when compared the other terms in the interaction region. The distributions of the Reynolds stress and the triple moment in the similar region are found to be similar to those of conventional plane jets.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.239-239
• /
• 2015

This study presents a bivariate extension of the goodness-of-fit measure for regional frequency distributions developed by Hosking and Wallis [1993] for use with the method of L-moments. Utilising the approximate joint normal distribution of the regional L-skewness and L-kurtosis, a graphical representation of the confidence region on the L-moment diagram can be constructed as an ellipsoid. Candidate distributions can then be accepted where the corresponding the oretical relationship between the L-skewness and L-kurtosis intersects the confidence region, and the chosen distribution would be the one that minimises the Mahalanobis distance measure. Based on a set of Monte Carlo simulations it is demonstrated that the new bivariate measure generally selects the true population distribution more frequently than the original method. An R-code implementation of the method is available for download free-of-charge from the GitHub code depository and will be demonstrated on a case study of annual maximum series of peak flow data from a homogeneous region in Italy.

• Journal of the Korean Statistical Society
• /
• 제22권2호
• /
• pp.235-247
• /
• 1993

The predictive density function of a potential future observation and its first four moments are obtained in this paper to study the effects of a non-normal prior of the unknown mean of a normal population. The derived predictive density function is modified to study changes in utility curves, used to choose the optimum treatment from a given set of treatments, at a given level of stimulus due to slight deviations from normality of the prior distribution. Numerical illustrations are provided to exhibit some effectsl.

• Journal of the Korean Statistical Society
• /
• 제30권1호
• /
• pp.115-125
• /
• 2001

We consider the threshold autoregressive moving average(TARMA) process and find a sufficient condition for strict stationarity of the proces. Given region for stationarity of TARMA(p,q) model is the same as that of TAR(p) model given by Chan and Tong(1985), which shows that the moving average part of TARMA(p,q) process does not affect the stationarity of the process. We find also a sufficient condition for the existence of kth moments(k$\geq$1) of the process with respect to the stationary distribution.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1187-1196
• /
• 1989

In this paper, a method for computing the capacitance parameter for a multi-interconnection line in a multilayered dielectric region is presented. The number of interconnection lines and the number of dielectric layers are arbitrary, and the interconnection lines are finite cross section or infinite cross section. The surface of lines and dielectric interface are divided into subsection. The surface charge density of each subsection is a constant step-pulse function for each subsection. After the solution of surface charge density is effected by the method of moments, capacitance parameter is calculated.

• 전자공학회논문지A
• /
• 제32A권7호
• /
• pp.23-29
• /
• 1995

A characteristic mode theory for longitudinal slot of arbitrary width in the outer conductor of coaxial waveguide is applied for calculating the characteristic magnetic currents, the characteristic fields, radiation patterns, and the fields evershere(inside and outside the guide, and in the aperture region). Numerical results of the equivalent magnetic currents and the radiation patterns are compared with those obtained by use of the method of moments.

• 대한전자공학회논문지SP
• /
• 제45권4호
• /
• pp.10-21
• /
• 2008

본 논문은 실시간 감시 시스템을 위한 웨이블릿(wavelet) 기반의 신경망과 불변 모멘트를 이용한 이동물체 인식과 추적 방법을 제안한다. 제안한 방법의 첫 번째인 움직임 후보영역 검출 단계에서는 연속된 두 프레임간의 차영상 분석 방법을 기반으로 하여 물체의 움직임에 의해 화소값 변화가 발생한 후보영역을 검출한다. 두 번째인 물체 인식 단계에서는 검출된 후보영역에 웨이블릿 신경망(wavelet neural network: WNN) 기반의 인식 방법을 사용하여 추적하고자하는 물체가 포함되어 있는지를 판별한다. 세 번째인 물체 추적 단계에서는 인식된 물체에 웨이블릿 불변 모멘트(invariant moments) 기반의 매칭 방법을 사용하여 인식된 이동 물체를 추적한다. 영상내에서 이동물체를 검출하기 위해 본 논문에서는 이전 영상과 현재 영상간의 화소밝기 차이에서 적응적 임계값(adaptive threholding)을 사용하여 주위 환경 변화에 강인한 이동물체 검출이 가능하였다. 또한 물체의 인식과 추적을 위해 웨이블릿 특징값을 사용함으로써, 계산 시간의 감소와 영상의 잡음에 의한 영향을 최소화시킬 수 있을 뿐만 아니라, 물체 인식 정확도가 향상되었다. 제안한 방법을 일반 도로에서 획득한 영상에서 실험한 결과, 자동차 검출율은 92.8%, 프레임당 처리 시간은 0.24초이다. 이것을 통해 제안한 방법은 실시간 지능형 교통 감시 시스템에 유용하게 적용될 수 있음을 알 수 있다.

• 한국수자원학회논문집
• /
• 제34권2호
• /
• pp.119-130
• /
• 2001

본 연구에서는 한강유역의 1일, 2일, 3일 연최대강우자료를 대상으로 L-모멘트법을 이용한 지점 빈도해석과 지역 빈도해석을 실시하여 그 결과를 비교하였다. 지역빈도해석을 실시하기 위하여 한강유역을 남한강, 북한강, 한강하류부 유역의 3개 소유역으로 분할하고, 각 유역에 대한 자료의 이산도 및 동질성을 검토하였으며, 각 소유역에 대하여 여러 분포형을 적용한 결과, 남한강유역과 한강하류부 유역은 lognormal 분포형, 북한강 유역은 gamma-3 분포형이 적정분포형으로 선정되었다. 지역빈도해석과 지점빈도해석을 통하여 선정된 확률분포형을 이용, Monte Carlo 모의를 수행하였으며, 재현기간에 따른 상대편의와 상대제곱근 오차를 산정하였다. 지역빈도해석과 지점빈도해석을 비교한 결과 상대제곱근오차에 있어서 지역빈도해석을 수행한 경우가 지점빈도해석에 비해 그 결과가 우수하였으며, 재현기간이 커질수록 그 차이는 현저하게 나타났다. 따라서, 한강유역의 강우량에 대해서 지역빈도해석 수행함이 지점빈도해석에 비해 우수하다는 결론을 얻게 되었다.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.799-808
• /
• 2002

This paper aims at selecting the multi-response design with γ responses minimizing the bias error caused by fitting inadequate models to responses, where the first order models are fitted to Ρ responses fearing the quadratic bias, while to other γ- Ρ responses, the quadratic models are fitted fearing the cubic biases in the cuboidal region of interest. Under the assumption of symmetric design, by minimizing the criterion which represents the amount of error caused by fitting inadequate models, the optimum design was found to be the one having the design moments of second order and the fourth order as 1/3 and l/5, respectively. Examples of the design meeting the required conditions are given for illustration.