• Korean Journal of Breeding Science
• /
• v.51 no.3
• /
• pp.214-221
• /
• 2019

'Aram' is a soybean cultivar developed for soy-sprout. It was developed from the crossing of 'Bosug' (Glycine max IT213209) and 'Camp' (G. max IT267356) cultivars in 2007. F₁ plants and F₂ population were developed in 2009 and 2010. A promising line was selected in the F₅ generation in 2011 using the pedigree method and it was evaluated for agronomic traits, yield, and soy-sprouts characteristics in a preliminary yield trial (PYT) in 2012 and an advanced yield trial (AYT) in 2013. Agronomic traits and yield were stable between 2014 and 2016 in the regional yield trial (RYT) in four regions (Suwon, Naju, Dalseong, and Jeju). Morphological characteristics of 'Aram' are as follows: determinate plant type, purple flowers, grey pubescence, yellow pods, and small, yellow, and spherical seeds (9.9 g 100-seeds^-1) with a light brown hilum. The flowering date was the 5^th of August and the maturity date was the 15^th of October. Plant height, first pod height, number of nods, number of branches, and number of pods were 65 cm, 13 cm, 16, 4.5, and 99, respectively. In the sprout test, germination rate and sprout characteristics of 'Aram' were comparable to that of the 'Pungsannamulkong' cultivar. The yield of 'Aram' was 3.59 ton ha^-1 and it was 12% higher than that of 'Pungsannamulkong' in southern area of Korea. The yield of 'Aram' in the Jeju region, which is the main region for soybean sprout production, was 20% higher than that of 'Pungsannamulkong'. The height of the first pod and the tolerance to lodging and pod shattering, which are connected to the adaptation to mechanized harvesting, were higher in 'Aram' compared to those in 'Pungsannamulkong'. Therefore, the 'Aram' cultivar is expected to be broadly cultivated because of its higher soybean sprout quality, and seed yield and better adaptation to mechanized harvesting. (Registration number: 7718)

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.470-476
• /
• 2014

The purpose of this study was to investigate the effects of sowing time on ecological responses, growth, and yields of cowpeas grown in plastic greenhouses in a southern region of South Korea. Experiments were carried out in Naju, Jeonnam Province (Latitude $35^{\circ}$ 04' N, Longitude $126^{\circ}$ 54' E) during 2012 and 2013. The intermediate-erect type strains used in this study were Jeonnam1 and Jeonnam2. Sowing was performed between mid-March and mid-August at intervals of one month. The days from sowing to emergence was significantly higher for the mid-March sowing (12 days) but no significant differences were observed among the other sowing dates (3 to 4 days). The days from sowing to first flowering were shorter for sowing dates between mid-March and mid-July because sowing time was delayed and then were lengthened again at mid-August sowing; the days were longest at mid-March sowing (around 75 days) and were shortest at mid-July sowing (30 days). The days from first flowering to harvesting were short for the sowing dates between mid-March and mid-May (24 to 28 days) but were relatively long for subsequent sowing dates (35 to 38 days). Stem and peduncle lengths were relatively long for the mid-April and mid-August sowing dates. Main-stem node number was highest for the mid-June sowing. Branch number per plant was highest for the mid-March sowing. The mid-March sowing displayed the highest number of pods per plant as well as the heaviest seed weight. Yield per 10 ares was highest for the mid-March sown Jeonnam1 and the Jeonnam2 strains (340 and 367 kg respectively), and then tended to decrease due to subsequent delays in sowing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.125-130
• /
• 2008

This study analyzed the growth, seed quality, and yield of major early-maturing soybean cultivars by comparing them in order to utilize the research results in the selection of early-maturing soybean cultivars in multi-cropping farms in the Southern area. This field trial was conducted at Naju region (latitude $35^{\circ}04'N$, longitude $126^{\circ}54'E$), Jeonnam, with planting on June 15. The maturing date for Keunol-kong and Hwaseong-put-kong was found to be around September 12, which was earlier than other cultivars. Thus, there were advantages to introducing a cropping system as well as having good seed quality and high yield. On the other hand, the maturing date for Saeol-kong and Sinrok-kong was found to be around September 20, which was a little bit late; however, the seed quality of the cultivars was good and they had a high yield. Therefore, if we want to sow the following crops of soybeans around mid-September, Keunol-kong and Hwaseong-put-kong are advantageous, while for the seeding around late September, Saeol-kong and Sinrok-kong would be good. This study was also performed to identify the limitation time for early harvesting by reviewing seed quality and yield of major early-maturing soybean cultivars according to early harvesting. When harvesting Keunol-kong on September 6, which was six days earlier than the optimal harvesting time (September 12), there was no difference in seed weight, yield, or seed quality than those of the harvested at the optimum maturing time. As for Saeol-kong, when harvesting on September 18, which was six days earlier than the optimal harvesting time (September 24), there was no difference in seed weight, yield, or seed quality than those of the harvested at the optimum maturing time. Therefore, the stable limitation time for early harvesting of Keunol-kong and Saeol-kong was concluded to be six days earlier than the optimal harvesting time.

• Korean Journal of Environment and Ecology
• /
• v.30 no.2
• /
• pp.165-172
• /
• 2016

Mallard and Spot-billed ducks that are typical wintering water birds use the wide rice field in the center of the water system as a wintering ground. I try to figure out the daily movement distance from Home-Range to wintering ground for mallard and spot-billed ducks in Mangyunggang, Dongjingang where located in central region. In 2015 wintering period by using a Cannon-net, I attached WT-300 to 5 mallard and 5 spot-billed ducks. Daily movement distance is an overall average 0.89km, the largest distance was 31.09km. Daily movement distance of mallard was 0.97km, the largest distance was 28.78km. Daily movement distance of Spot-billed ducks was 0.80km, the largest distance was 33.39km. Home-Range analysis is used by the SHP files that is compatible with GIS and ArcGIS 9.0 Animal Movement Extension, it was analyzed using the Minimum Convex Polygon Method (MCP) and the Kernel Density Estimation (KDE). The behavior rights of two kinds of ducks was $490.34km^2$ by Minimum Convex Polygon Method (MCP) ($SD=311.20km^2N=10$), an important habitats Kernel Density Estimation (KDE 50%) was $42.24km^2$. Home-Range of Mallard (MCP) was $568.02km^2$, it is wider than home-range(MCP) of spot-billed duck $397.13km^2$ relatively, the core habitats of mallard is $53.05km^2$, it is wider than mallard's core habitats(KDE 50%) $29.26km^2$ relatively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.753-759
• /
• 2007

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress under unilateral loading specially. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs under unilateral loading, using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1: Clasp-retained mandibular removable partial denture with unsplinted abutments Group 2: Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge. Group 3: Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm dose to the abutments. Two unilateral vertical experimental loadings (30N and 100N) were applied subsequently via miniature load cell that were placed at mandibular left first molar region. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Tukey test was used as post hoc comparisons. Results. The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Strain values increased as the applied load in increased from 30N to 100N (p<.05) except for right side in group 1. Under 30N loading, in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 100N loading in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 30N loading, group 2 and 3 showed higher strain values in right side than in left side. Under 100N loading, right side strain values were higher than left side ones for all groups. Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments under unilateral loading. Bar-retained removable partial denture showed the lowest strain of three groups, and compressive nature.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.9-26
• /
• 1999

The Ulleung Basin (Tsushima Basin) in the southwestern East Sea (Japan Sea) is floored by a crust whose affinity is not known whether oceanic or thinned continental. This ambiguity resulted in unconstrained mechanisms of basin evolution. The present work attempts to define the nature of the crust of the Ulleung Basin and its tectonic evolution using seismic wide-angle reflection and refraction data recorded on ocean bottom seismometers (OBSs). Although the thickness of (10 km) of the crust is greater than typical oceanic crust, tau-p analysis of OBS data and forward modeling by 2-D ray tracing suggest that it is oceanic in character: (1) the crust consists of laterally consistent upper and lower layers that are typical of oceanic layers 2 and 3 in seismic velocity and gradient distribution and (2) layer 2C, the transition between layer 2 and layer 3 in oceanic crust, is manifested by a continuous velocity increase from 5.7 to 6.3 km/s over the thickness interval of about 1 km between the upper and lower layers. Therefore it is not likely that the Ulleung Basin was formed by the crustal extension of the southwestern Japan Arc where crustal structure is typically continental. Instead, the thickness of the crust and its velocity structure suggest that the Ulleung Basin was formed by seafloor spreading in a region of hotter than normal mantle surrounding a distant mantle plume, not directly above the core of the plume. It seems that the mantle plume was located in northeast China. This suggestion is consistent with geochemical data that indicate the influence of a mantle plume on the production of volcanic rocks in and around the Ulleung Basin. Thus we propose that the opening models of the southwestern East Sea should incorporate seafloor spreading and the influence of a mantle plume rather than the extension of the crust of the Japan Arc.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.26-32
• /
• 2014

'Dahan' (Avena sativa L.), a winter oat cultivar for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute Crop Science (NICS), Rural Development Administration (RDA) in 2011. It was derived from an original cross between $F_1$[Sprinter/73625] and 'Gwiri26'. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon. A line, 'SO99027-GB-B-113-4-4-3', was selected for cold tolerance and good agronomic characteristics and as a line name of 'Gwiri75'. The line 'Gwiri75' was subsequently evaluated for cold tolerance and forage yield during 3 years in four region such as Yesan, Iksan, Kimjae, and Jeju, from 2009 to 2011 and finally named as 'Dahan'. Though similar in heading date to the check cultivar Samhan, 'Dahan' had tall plant length and lodging resistance. It's average forage dry matter yield harvested at milk-ripe stage was 15.6 ton $ha^{-1}$, compared with 14.1 ton $ha^{-1}$ of check cultivar. Cultivar 'Dahan' was lower to the check cultivar 'Samhan' in protein content (8.4% and 9.9%, respectively), while it was superior to the check cultivar in total digestible nutrients (TDN) (60.8% and 59.3%, respectively), and in TDN yield $ha^{-1}$ (9.5 ton and 8.4 ton, respectively). Fall sowing of 'Dahan' is recommended only in the areas where daily minimum mean temperatures are averaged higher than $-7^{\circ}C$ in January, and excluded in mountain area where frost damage is presumable.

• Korean Journal of Microbiology
• /
• v.49 no.2
• /
• pp.131-136
• /
• 2013

This study was conducted to select rhizobia from hairy vetch (Vicia villosa Roth) with nodulation and excellent nitrogen-fixing ability. Hairy vetch root was collected from 7 of cultivation region of all over the country, rhizobia were isolated from the root nodules. Isolates were re-inoculated into a hairy vetch separately and studied nodulation and nitrogen-fixing ability. As a result, total of 52 Rhizobium isolates were isolated from the hairy vetch root nodules, among these, 16 isolates were Rhizobium which show good growth at more than 0.5% NaCl concentration. These 16 isolates were re-inoculated separately, 8 weeks after, good root nodule formation was observed from Rhizobium sp. RH1, RH3, RH81, RH82, RH84, and RH93 strain treated samples. Six isolates were positive for nitrogen fixing ability, the highest acetylene reduction activity was shown by Rhizobium sp. RH84. Results suggest that the Rhizobium sp. RH84 could be used as the possibility of its application as a green manure crop of hairy vetches in nonuniform salt distribution reclaimed land.

• Current Research on Agriculture and Life Sciences
• /
• v.24
• /
• pp.1-8
• /
• 2006

When tea trees were introduced to Korea peninsular from China? Historically, Mr. Taeryum, an envoy of Shilla dynasty brought tea seeds from China during Tang dynasty and the seeds were planted at Jiri Mt. by the order of King Heungduk at AD828. During Koryo Dynasty(918 1392), Buddhism spread rapidly all over the country and the tea culture reached its highest stage of prosperity. At the Chosun Dynasty, however, the ceremonial drinking of tea vanished almost completely due to the flourishing Confucian tradition, a kind of substitution of Buddhism. But a few people have supported the traditional tea culture by themselves. Since the independence of Korea soon after the World War II at 1945, Korean War have been exploded at 1950. After economic evolution have been succeeded at 1980, the cultivation area of tea trees has been increased about 2,000ha and the cultural tradition of tea drinking has become popular again at a tea consume quantities amounted to 100g per capita at 2004. The northern limited area of tea plant is lined on the southern part of Korea peninsular. It is very small region compared to China about one million ha and to Japan over 60 thousand ha. It is problem not only the area of tea fields but also the methodology of tea cultivation, for examples without clonal cultivars and mechanical systems. WTO treatments was discussing with Korea, China and Japan government at 2005. Green tea custom is very high at 514% in Korea. If three countries will be agreed the imported tax will be cut off, the Korean tea farmers will be confused because of unstable situation of tea markets. All most of tea farmers should be made the tea fields by seeding not clonal propagation. Because of clonal cultivars have not developed in Korea, there have not been the research institutes for tea plants and manufactures before 1992. Now there are three research institute of tea in Korea; Tea Experiment Station at Bosung of Jeonnam Agricultural Research & Extension Services, Mokpo Experimental Station of National Institute of Crop Science, and Green Tea Cluster Institute of Hadong. Mokpo and Hadong Research Station were established at 2004 and at 2005 but Bosung Station was established at 1992. Seven clonal tea cultivers were selected at Bosung Station; Bohyang, Myngsun, Chanlok, Sunhyang, Mihyang, Jinhyang and Ohsun until 2004. Mokpo Experimental Institute was started the tea provenance testing about 4 provenances: Kangwon-do, Jeonlabuk-do, Jeonlanam-do, and Kyungsangnam-do. Korean new tea cultivers should be selected because Koran wild tea population have been high genetic variation. If tea breeding research will be successful to select new clonal cultivers, the tea farmers of Korea will be stable after WTO treatment with each country.

• Korean Journal of Plant Resources
• /
• v.29 no.4
• /
• pp.504-510
• /
• 2016

This study was investigated to find the effects of sowing time on growth and yields of cowpea grown in a southern region of South Korea. Experiments were carried out in Naju, Jeonnam Province (Latitude 35° 04' N, Longitude 126° 54' E) during 2013 and 2014. The intermediate-erect type strains used in this study were Jeonnam1 and Jeonnam2 (Okdang). Sowing time was performed between middle-April and middle-August at intervals of one month. The days from sowing to emergence was significantly higher in the middle-April sowing (12 days) time but there was no significant differences other sowing dates (5 to 3 days). The days from sowing to first flowering were shorter for sowing dates between middle-April and middle-July because sowing time was delayed and then were lengthened again at middle-August sowing; the days were longest at middle-April sowing (around 62 days) and were shortest at middle-July sowing (35 days). The days from first flowering to harvesting were short for the sowing dates between middle-April and middle-July (17 to 15 days) but were relatively long for middle-August sowing date (24 days). Stem length was relatively long for the middle-May and middle-June sowing dates. Peduncle length was relatively long for the middle-April sowing date. Main-stem node number was highest for the middle-July sowing. Branch number per plant was highest in the middle-April sowing. Seed yields were highest for the middle-April sown Jeonnam1 and the Jeonnam2 (Okdang) strains showing, 199 and 211 kg/10a, respectively, and then followed by sowing in middle-July, 191 and 195 kg/10a, respectively.