• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.251-252
• /
• 2008

Throughput and quality-of-service (QoS) over multi-cell environments are two of the most challenging issues that must be addressed when developing next generation wireless network standards. Currently, multiple-input/multiple-output (MIMO), inter-cell coordination and multi-hop relay technologies are viable options for improving channel capacity or coverage extension. Nevertheless, severe QoS degradation occurs in the outer region of multi-cells due to significant interference from neighboring cells or relay stations, thereby limiting overall performance. Therefore, we propose a scheme which adapted to hybrid relaying.

• Journal of computational fluids engineering
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1996

A multiblock grid generation has been developed to be reliably used for a Navier-Stokes simulation of the turbomachinery flow-fields A multiblock structure simplifies the creation of structured H-grids about complex turbomachinery geometries and facilitate the creation of a grid in the tip flow region. The numerical algorithm adopts the combination of the algebraic and elliptic method to create the internal grids efficiently and quickly. The grid refinement process is enhanced by developing strategies to utilized Bezier curves and splines along with weighted transfinite interpolation technique and by formulating the grid-imbedding method for the viscous boundary-layer meshes. For purposes of illustration, the grid generator is applied to the high turning turbine rotor blades. Two different types of computational grids are provided to be compared with respect to the grid adaptation to the flow simulations. Extension to three-dimensions was done to show the possibility of its application to the tip-flow simulations. The grid quality of the multiblock structure is good in the passages, with gloval orthogonality and adequate smoothness.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.273-277
• /
• 2002

This paper describes an optimal synthesis method of binary neural network(BNN) for an approximation problem of a circular region and synthetic image having four class using a newly proposed learning algorithm. Our object is to minimize the number of connections and neurons in hidden layer by using a Newly Expanded and Truncated Learning Algorithm(NETLA) based on the multilayer BNN. The synthesis method in the NETLA is based on the extension principle of Expanded and Truncated Learning (ETL) learning algorithm using the multilayer perceptron and is based on Expanded Sum of Product (ESP) as one of the boolean expression techniques. The number of the required neurons in hidden layer can be reduced and fasted for learning pattern recognition.. The superiority of this NETLA to other algorithms was proved by simulation.

• Honam Mathematical Journal
• /
• v.35 no.1
• /
• pp.37-49
• /
• 2013

Consider a non-degenerate open convex cone C with vertex the origin in the $n$2-dimensional Euclidean space $E^n$. We study volume properties of strictly convex hypersurfaces in the cone C. As a result, for example, if the volume of the region of an elliptic cone C cut off by the tangent hyperplane P of M at $p$ is independent of the point $p{\in}M$, then it is shown that the hypersurface M is part of an elliptic hyperboloid.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.6
• /
• pp.459-466
• /
• 2005

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking defects, By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods, An extension of the SLS approach to map defects in microdevices is proposed by bringing both the generator and the receiver to the near-field scattering region of the defects, To facilitate near-field ultrasound measurement, silicon microcantilever probes are fabricated using microfabrication technique and their acoustical characteristics are investigated, Then, both the laser-generated ultrasonic source and the microcantilever probe are used to monitor near-field scattering by a surface-breaking defect.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.43-51
• /
• 2006

80-nm self-aligned n-and p-channel I-MOS devices were demonstrated by using a novel fabrication method featuring double sidewall spacer, elevated drain structure and RTA process. The fabricated devices showed a normal transistor operation with extremely small subthreshold swing less than 12.2 mV/dec at room temperature. The n- and p-channel I-MOS devices had an ON/OFF current of 394.1/0.3 ${\mu}A$ and 355.4/8.9 ${\mu}A$ per ${\mu}m$, respectively. We also investigated some critical issues in device design such as the junction depth of the source extension region and the substrate doping concentration.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2005

Continued scaling of MOS devices requires the formation of the ultra shallow and very heavily doped junction. The simulation and experiment results show that the degradation of pMOS performance in logic and SRAM pMOS devices due to the excessive diffusion of the tail and a large amount of dose loss in the extension region. This problem comes from the high-temperature long-time deposition process for forming the spacer and the presence of fluorine which diffuses quickly to the $Si/SiO_{2}$ interface with boron pairing. We have studied the method to improve the pMOS performance that includes the low-energy boron implantation, spike annealing and device structure design using TCAD simulation.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.477-486
• /
• 2012

This paper proposes a novel current control scheme for vector-controlled induction machine (IM) drives in the overmodulation (OVM) range, with which the voltage utilization of the voltage-source inverter (VSI) can be maximized. In the OVM region, the original voltage reference is modified by changing its magnitude and angle, which causes the motor current to be distorted, resulting in a deterioration of the current control performance. To meet with this situation, the harmonic components in the feedback currents should be eliminated before being input to the PI current controllers. For this, a composite observer is applied to extract the fundamental and harmonic components from the distorted currents, which gives a good performance without a delay and the effect of a fundamental frequency variation. In addition, through a detailed analysis of the response of the PI current controllers in the OVM range, the effectiveness of using the composite observer is demonstrated. Simulation and experimental results for a 3-kW induction motor drive are shown to verify the validity of the proposed method.

• The Korean Journal of Community Living Science
• /
• v.17 no.2
• /
• pp.105-112
• /
• 2006

The biodegradability test of bulking agents in feces composting process is conducted to increase the management efficiency for environment-friendly rural toilet developed by National Rural Resource Institute in 2001. In the case study through references and field study, ash, fallen leaves, and wood chips are commonly used in the ecological toilet. Extension officers and farmers prefer rice straw, fallen leaves, and chaff among the rural resources as a bulking agents in the aspect of getting and storage as the result of questionnaire survey. As the result of biodegradability test including the temperature change, $CO_2$ gas production, and C/N ratio change of composting pile under the condition of aerobic composting apparatus, rice straw and chaff are good bulking agents for environment-friendly rural toilet. It is recommended that easy getting materials among the above mentioned materials are used for bulking agents as the region and season in environment-friendly rural toilet.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.643-648
• /
• 2011

This paper deals with the ESM(equivalent source method) with the continuation of acoustic near-field for NAH(near-field acoustic holography) to overcome the finite measurement aperture effect and reconstruct the normal velocity on an arbitrarily shaped structure surface. The continuation method is an extension of the measured sound field into a region outside and is based on the Green's function relating acoustic quantities on the two conformal surfaces. This algorithm is not limited to planar surfaces and can be applied to arbitrarily shaped surfaces. The ESM is an alternative approach of BEM-based NAH for the reconstruction on a general structure. In ESM the acoustic field is represented by a set of point sources located over a surface that is close to the structure surface. The simulation results of this study shows that the reconstruction error of particle velocity on the source surface is 11% and 16% for planar and cylindrical sources separately.