• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.2
• /
• pp.169-181
• /
• 1986

A numerical analysis has been conducted on the dehumidification phenomena of rotary absorptive dehumidifier. Parameters that affect the dehumidification efficiency, such as regeneration temperature, humidity, rotor angular velocity, air flow rate and regeneration section angle are studied and optimum driving conditions are determined from the results, Furthermore three new types of dehumidification method are developed to improve the efficiency They are named MODE 2, 3 and 4, while the present one MODE 1. Cooling zone has been constructed between regeneration and process Bone in MODE 2 and as a result exit temperature of the process air decreases. MODE 3 an improvement of MODE 2, recirculates the cooling air into the regeneration zone and regeneration input as well as exit temperature decreases. In MODE 4, some of tee regeneration air is recirculated and it cuts down the regeneration input. Among them MODE 3, showed the best dehumidification efficiency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.279-283
• /
• 2011

The immature embryos during seed development were examined to predict the suitable embryos for an efficient regeneration system. Five spring wheat genotypes and five winter wheat genotypes were tested using immature embryos as explants. Spring wheat genotypes showed much higher levels of plant regeneration than those of winter wheat genotypes. The highest frequencies of embryogenesis and regeneration were obtained when embryos at 13-14 days after anthesis (DAA) were used as explant and decreased using embryos at 21-22 DAA during seed development. Significant differences were also found for callus induction and regeneration as affected by immature embryo size. The regeneration efficiency was drastically decreased in spring and winter wheat genotypes when embryos larger than 2.0 mm of length were used. The optimum developmental stage and embryo length for regeneration efficiency were at 13-14 DAA and 1.0-1.5 mm, respectively. The selection of suitable embryos for the high frequencies of embryogenesis and regeneration leads us to efficient genetic improvement of wheat.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.3
• /
• pp.285-294
• /
• 1987

Parametric study on the efficiency of Rotary Solid Dehumidifer are reported. Experi-ments have been performed by varying regeneration temperature, regeneration humidity, flow rate of regeneration air, angular velocity of dehumidifer rotor and regeneration angle. To improve the energy efficiency, MODE 2,3 where coding zone is constructed and MODE 4, 5 where recirculating zone is constructed, were studied through experimental method $\ldots$. These results show that economical operating ranges exist in regeneration temperature, flow rate of regeneration air, angular velocity of dehumidifier rotor and regeneration angle. MODE 2,3 where cooling zone is constructed between regeneration Bone and process zone, is far better than MODE 1 in view of energy effiency, and optimum cooling angle and flow rate of cooling air exist. But MODE 4 and MODE 5, where recirculating zone is constructed, are similar to MODE 1.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.947-953
• /
• 2017

In this study, the regeneration efficiency of the amino acid salt absorbent which can be applied to carbon dioxide absorption / regeneration process was confirmed. The regeneration efficiency has a great influence on the economical judgment of the process. so, continuous regeneration experiment was conducted to establish economical process. The amino acid salts used in the experiments are Potassium L-lysinate and Potassium L-alaninate. Each amino acid and potassium hydroxide(KOH) were mixed at a 1: 2 molar ratio. In order to confirm the regeneration efficiency of the absorbent, carbon dioxide was absorbed in the two materials, and the carbon dioxide desorption experiment was carried out by heating. The initial reaction rate was L-alanine was faster. Over time, L-lysine, desorption higher concentrations of carbon dioxide. L-lysine showed higher regeneration efficiency than L-alanine, (L-alanine 47.26% and L-lysine 62.11%). As a result of the continuous regeneration experiment using the L-lysine having good absorption and regeneration efficiency, it was confirmed that the regeneration efficiency decreases as the number of regeneration increases.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.10-19
• /
• 2009

The working of diesel particulate filters(DPF) needs to periodically burn soot that has been accumulated during loading of the DPF. The prediction of the relation between an uniformity of gas velocity and soot regeneration efficiency with simulations helps to make design decisions and to shorten the development process. This work presents a comprehensive combined 'DOC+CDPF' model approach. All relevant behaviors of flow fluid are studied in a 3D model. The obtained flow fields in the front of DPF is used for 1D simulation for the prediction of the thermal behavior and regeneration efficiency of CDPF. Validation of the present simulation are performed for the axial and radial direction temperature profile and shows goods agreement with experimental data. The coupled simulation of 3D and 1D shows their impact on the overall regeneration efficiency. It is found that the flow non-uniformity may cause severe radial temperature gradient, resulting in degrading regeneration efficiency.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.449-458
• /
• 2023

As an adsorption technology for dissolved organic matter, the adsorption capacity of granular activated carbon, GAC, can be applied, but activated carbon whose adsorption capacity is significantly reduced by use is inevitably replaced or regenerated. However, due to the economics of replacement cost, thermal regeneration method is used commercially, but high energy cost and loss of activated carbon occur under high temperature conditions above 800℃. In this study, the Sono-Fenton method, a multi-oxidation technology that combines Fenton oxidation and ultrasonic oxidation, was applied to improve the regeneration efficiency of spent GAC used to treat dissolved organic matter in combined sewer overflows (CSOs), and the regeneration efficiency of spent GAC by oxidant and ultrasonic frequency was investigated. In the applied Sono-Fenton treatment, the highest regeneration efficiency of 68.5% was obtained under the regeneration conditions of Fe²⁺ 10 mmol/L, H₂O₂ concentration 1,000 mmol/L, ultrasonic treatment time of 120 min, and ultrasonic frequency of 40 kHz. And similar efficiency was also obtained at 750 kHz, while ultrasonic waves of other frequencies had poor regeneration efficiency, and the magnitude of frequency and GAC regeneration efficiency did not show a linear relationship. In the case of continuous operation of the GAC adsorption tower with CSOs prepared by diluting raw sewage, about 700 hours of operation without regeneration was possible, and as a result of applying one Sono-Fenton treatment, 40-70% COD_cr removal efficiency was obtained during a total of 1,000 hours of GAC adsorption operation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.349-353
• /
• 2004

Mature embryo and leaf base segment of Korean oat were used as materials in an experiment to check plant regeneration efficiency. MS media supplemented with 2,4-dichlorophenoxyacetic acid (2,4-D), kinetin, and picloram were used for callus induction from mature embryos and leaf base segments. Three mg/l of 2,4­D and 3 mg/l of picloram in callus induction medium showed high frequency for plant regeneration from mature embryos. Leaf base segments were transferred to callus induction medium and incubated at $25^{\circ}C$ in 16/8 hr light/dark cycle for 3 weeks. Callus induction from leaf base segments of Malgwiri showed high efficiency in medium containing 3 mg/l of 2,4-D and 1 mg/l of kinetin $(91.8\%)$. In case of Samhangwiri, the combinations of phytohormones did not show significant difference. Regeneration from leaf base segments showed high frequency in shoot medium containing 1 mg/l of antiauxin, tri-iodobenzoic acid (TIBA) and 1 mg/l of 6-benzyladenine (BA). Calli induced from leaf base segments of Samhangwiri and Malgwiri in media containing 3 mg/l of 2,4-D and 3 mg/l of picloram showed high regeneration frequency. It appears that the callus initiation medium may be an important factor for subsequent plant regeneration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.356-360
• /
• 2005

Mature embryos were aseptically excised with a scalpel and sliced in fragments measuring 0.5 mm in diameter (sliced mature embryo fragment; 4 ${\~}$ 5 fragments/one embryo). Sliced mature embryo fragments of six wheat cultivars were cultured to develop an efficient method of callus induction and plant regeneration. Callus derived from sliced mature embryo fragments showed a good capacity to embryogenesis and regeneration. Furthermore sliced mature embryo fragments decreased contamination from fungi and bacteria. The high efficiency of callus induction were obtained Keumkangmil and Bob­white. For plant regeneration, selected embryogenic calli were transferred to two types regeneration media. An average number of green spots per callus was 4 to 5 in regeneration media after about one week. Percentage of plant regeneration showed high in regeneration medium containing 0.1 mg/l 2,4-D and 5 mg/l zeatin. Especially, Keumkangmil ($27.5\%$) and Bobwhite ($33.3\%$) showed high regeneration efficiency. This regeneration system from sliced mature embryo fragments may provide an effective and convenient explant for plant transformation studies.

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1163-1170
• /
• 2015

This study carried out continuous column test for estimating the regeneration efficiency with regeneration times and temperatures. More times regenerated granular activated carbon (GAC) has more ash in the GAC and has less apparent density. Two times regenerated GAC ($2^{nd}$ re-GAC) could removed the Trihalomethanes (THMs) in the water for the first two week after starting continuous column test, on the other hand five times regenerated GAC ($5^{th}$ re-GAC) did not have adsorption capacity. The THMs concentration in the effluent was almost equal or higher than that of influent at the first time of continuous column test. $2^{nd}$ re-GAC showed much more DOC adsorption capacity than $5^{th}$ re-GAC and the GAC which was regenerated with $700^{\circ}C$ had highest DOC removal efficiency among the GACs with 600, 700, 800, $900^{\circ}C$ regeneration temperatures. It is anticipated the cost of GAC regeneration could be saved more 100 million won by reducing the furnace temperature of 3rd~4th and 5th~6th about $150^{\circ}C$ compared to the current regeneration condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.2
• /
• pp.93-100
• /
• 2002

Comparison results of callus formation ratio from seed explants, callus sizes, regeneration ratios from callus and regeneration efficiency [calculated by following formular; callus formation ratio(%) ${\times}$ regeneration ratio(%)/100] for 27 ochardgrass (Dactylis glomerata L.)varieties imported and Hapsung 2 developed in Korea are as follows; 1. Among ochardgrass varieties showing more than 50% callus formation ratios, the descending order of callus formation ratio after bedding the seed explants for 4 weeks was 93M>Sparta> Pizza>Condor>Lidaglo>Glorus>Hapsung 2>Frode. 2. The callus sizes after bedding for 4 weeks were in the range of $\Phi$ 0.43cm~4.2cm in which there was 10 times size difference between the largest one and the smallest one but most of them were between ${\Phi}2.5cm~4cm$. 3. The regeneration ratio from callus among varieties were in the range of 0~36% and descending order of the upper 6 varieties was Plano>Akimidori>Justus>Lidacta>Currie>Hall mark. 4. The regeneration efficiency which is calculated by the ratios of regeneration from seed explant numbers was between 0 to 17.4% among which Justus showed the highest value in the 4-week treatment. 5. The correlation between callus formation ratios and the callus sizes, callus formation ratios and regeneration efficiency, and callus sizes and regeneration efficiency were r=0.5765, r=0.6365 and r=0.6246, respectively in 4-week callus and all the correlations were significant on the 1% level. 6. In 6-week callus, the descending order callus formation ratios from seed explants fur the best 6 varieties was Condor>Sparta>93 M>Justus>Potomac>Lidaglo>Frode. 7. The callus sizes formed were between ${\Phi}1.5~5.7cm$ in which Sparta, the largest one of ${\Phi}5.7cm$ was five times larger than the smallest one. The callus size of the control variety, Hapsung 2 was ${\Phi}3.8cm$, which belonged to a larger size. 8. Regeneration ratio showed a great deviation among varieties from 6-week old calli by showing from 0% to 100% in which all the calli were regenerated in Piano while no callus was regenerated in Juno. 9. The range of regeneration efficiency was between 0~28% among varieties in which the values from 6-week callus treatment were larger than those from 4-week callus treatment. Especially, the value of Potomac in 6-week was 3 times larger than that in 4-week. 10. The correlation between callus formation ratios and the callus sizes, callus formation ratios and regeneration efficiency, and callus sizes and regeneration efficiency were r=0.5369, r=0.6683 and r=0.5937. respectively in 6-week callus, and all the correlations were significant on the 1% level.