• 한국주조공학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2002

To improve the reliability of solder joints, a composite solder which consists of solder matrix and intermetallic reinforcements was manufactured by a new method. The cast ingot of Sn-6.9Cu-2.9Ag alloy had primary Cu6Sn5 intermetallics in the form of dendrites. After rolling the ingot, the intermetallic dendrites were crushed into fine particles and distributed uniformly throughout the solder matrix. As the rolled strips became thinner, the average size of the crushed particles reached a critical size which did not decrease any more by further rolling. The critical size was nearly the same as the average width of intermetallic dendrite trunk. The crushed intermetallic particles did not melt and remained in solid state during reflow soldering due to their high meltingterm-perature. The coarsening and gravitational segregation of the particles were observed during reflow soldering.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.104-107
• /
• 2007

An aspheric microlens array to improve the properties of multi optical probes was designed and fabricated. To generate multi optical probes with good qualities, a microlens array with the minimum spherical aberration was designed by ray tracing. Using the reflow process, a master pattern of aspheric microlens array was made and finally with the ultraviolet-imprinting (UV-imprinting) method, the aspheric microlens array was replicated. The reflow condition was optimized to realize the master pattern of the microlens array with the designed aspheric shape. The intensity distribution of the optical probes at the focal plane showed a diffraction-limited shape.

• 한국표면공학회지
• /
• 제35권1호
• /
• pp.47-52
• /
• 2002

Intermetallic compound on the soldered interface plays important role on the bondability and mechanical properties of soldered joint. The formation of intermetallic compounds are influenced by many factors such as temperature, holding time, base metals and so on. On this study the effect of number of reflow times on the intermetallic growth was investigated. For the experimental materials, Sn-3.5Ag-0.7Cu solder ball of 0.3mm diameter and RMA-type flux were used. Thickness of intermetallic compound of solder ball by 2nd reflow showed nearly 60% higher than that of 1st reflow, and shear strength showed 10% higher value. Thickness and shear strength according to the position of interface such as upper side or lower side between two substrates were also investigated.

• 마이크로전자및패키징학회지
• /
• 제19권1호
• /
• pp.17-24
• /
• 2012

Recently, flip chip interconnection has been increasingly used in microelectronic assemblies. The common Flip chip interconnection is formed by reflow of the solder bumps. Lead-Tin solders and Tin-based solders are most widely used for the solder bump materials. However, the flip chip interconnection using these solder materials cannot be applied to temperature-sensitive components since solder reflow is performed at relatively high temperature. Therefore the development of low temperature bonding technologies is required in these applications. A few bonding techniques at low temperature of $150^{\circ}C$ or below have been reported. They include the reflow soldering using low melting point solder bumps, the transient liquid phase bonding by inter-diffusion between two solders, and the bonding using low temperature curable adhesive. This paper reviews various low temperature bonding methods.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.49-53
• /
• 2002

The Sn-Cu eutectic solder bump formation ($140{\mu}{\textrm}{m}$ diameter, $250{\mu}{\textrm}{m}$ pitch) by electroplating was studied for flip chip package fabrication. The effect of current density and plating time on Sn-Cu deposit was investigated. The morphology and composition of plated solder surface was examined by scanning electron microscopy. The plating thickness increased with increasing time. The plating rate increased generally according to current density. After the characteristics of Sn-Cu plating were investigated, Sn-Cu solder bumps were fabricated on optimal condition of 5A/dm$^2$, 2hrs. Ball shear test after reflow was performed to measure adhesion strength between solder bump and UBM (Under Bump Metallization). The shear strength of Sn-Cu bump after reflow was higher than that of before reflow.

• 마이크로전자및패키징학회지
• /
• 제19권1호
• /
• pp.47-53
• /
• 2012

무연 리플로우 공정 횟수에 따른 organic solderability preservative(OSP) 표면처리 두께변화 및 열화현상을 분석하였다. 무연솔더 접합부의 접합강도에 미치는 OSP 표면처리의 열화특성을 SnPb 표면처리 경우와 비교하여 조사하였다. 또한 리플로우 pass에 따른 무연솔더 접합강도 열화분석을 위해 OSP 및 SnPb 표면처리된 FR-4 재질 PCB를 각각 1-6회 리플로우 처리하였다. 이후 각 리플로우를 거친 PCB 위에 2012 칩 저항기를 실장한 후 접합강도 변화를 측정하였다. 그 결과, 리플로우 공정 중 열 노출에 의해 OSP 코팅두께가 감소되는 것이 관찰되었고, 코팅두께의 변화 및 OSP 코팅 층의 산화를 유발함으로써, 솔더의 젖음성이 감소될 수 있음을 확인할 수 있었다. OSP 열화에 따른 솔더 접합강도는 SnPb 표리처리시 평균 62.2 N 이였으며, OSP의 경우는 약 58.1 N 이였다. 리플로우 공정 노출에 따라 OSP 코팅 층은 열분해 되지만, 솔더 접합부의 접합강도 측면에서는 산업적으로 적용 가능성을 확인할 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제16권3호
• /
• pp.11-17
• /
• 2009

휴대폰 및 휴대기기의 낙하 충격에 대한 관심이 증가되고 있는 상황에서 솔더 볼 접합부의 낙하 충격특성은 패드의 종류와 리플로우 횟수에 영향을 받게 되어 이에 따른 신뢰성 평가가 요구된다. 이와 관련한 평 가법으로 일반적으로는 JEDEC에서 제정한 낙하충격 시험법을 사용하고 있으나 이 방법은 고 비용과 장시간이 소모되는 문제가 있어 본 연구에서는 낙하충격 특성을 간접적으로 평가하는 시험항목인 고속 전단시험을 실시하여 리플로우 횟수에 의해 성장하는 금속간 화합물 층과 OSP(Organic Solderability Preservative), ENIG(Electroless Nickel Immersion Gold) 및 ENEPIG(Electroless Nickel Electroless Palladium Immersion Gold) 등 표면처리에 따른 고속 전단특성을 비교, 분석하였다. 그 결과 리플로우 횟수가 증가함에 따라 IMC 층의 성장으로 고속 전단강도와 충격 에너지 값은 점차 감소하였다. 리플로우 횟수가 1회일 때는 ENEPIG, ENIG, OSP 순으로 고속 전단강도와 충격 에너지 값이 높았고 8회일 때는 ENEPIG, OSP, ENIG 순으로 충격 에너지 값이 높게 측정되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.205-206
• /
• 2006

The microstructural evolutions and shear properties of the pure Sn solder bumps with Ni UBMs were investigated during multiple reflows and high temperature storage(HTS) tests. Only a $Ni_3Sn_4$ IMC was found at the bump/Ni UBM interface after 1 reflow. The layer thickness of these IMCs increased with increasing reflow number and testing time. The solder bumps showed a good reliability during multiple reflows and HTS tests.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.361-362
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.134-134
• /
• 2004

LCD-BLU의 고효율 광특성을 유도하기 위한 도광판의 초미세패턴 형상가공기술, 미세사출성형기술과 미세형상패턴 광학해석기술 및 전광특성 측정 및 보완기술이 요구된다. 이러한 기술들을 바탕으로 LCD-BLU의 고단가의 주요요인인 기능성 광학 sheet(prism sheet 등)를 연차적으로 제거 및 도광판에 기능을 결합하는 기술개발이 본 연구의 목적이다.(중략)