• Title/Summary/Keyword: Reflection Ratio

Search Result 417, Processing Time 0.026 seconds

Novel SAW-based pressure sensor on $41^{\circ}YX\;LiNbO_3$ ($41^{\circ}YX\;LiNbO_3$ 기반 SAW 압력센서 개발)

  • Wang, Wen;Lee, Kee-Keun;Hwang, Jung-Soo;Kim, Gen-Young;Yang, Sang-Sik
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.1 s.343
    • /
    • pp.33-40
    • /
    • 2006
  • This paper presents a novel surface acoustic wave (SAW)-based pressure sensor, which is composed of single phase unidirectional transducer (SPUDT), three reflectors, and a deep etched substrate for bonding underneath the diaphragm. Using the coupling of modes (COM) theory, the SAW device was simulated, and the optimized design parameters were extracted. Finite Element Methods (FEM) was utilized to calculate the bending and stress/strain distribution on the diaphragm under a given pressure. Using extracted optimal design parameters, a 440 MHz reflective delay line on 41o YX LiNbO3 was developed. High S/N ratio, shan reflection peaks, and small spurious peaks were observed. The measured S11 results showed a good agreement with simulated results obtained from coupling-of-modes (COM) modeling and Finite Element Method (FEM) analysis.

Genetic Variation in Growth and Body Dimensions of Jersey and Limousin Cross Cattle. 1. Pre- Weaning Performance

  • Afolayan, R.A.;Pitchford, W.S.;Weatherly, A.W.;Bottema, C.D.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.15 no.9
    • /
    • pp.1371-1377
    • /
    • 2002
  • During a 5-yr period, 1994-1998, pre-weaning and weaning data were collected on 591 calves produced by mating either straightbred Jersey, straightbred Limousin or $F_1$ (Limousin${\times}$Jersey) bulls to mature purebred Jersey or Limousin cows. Traits recorded included birth and weaning weight, height, length, girth, fat depth and a measure of muscle (ratio of stifle to hip width expressed as a percentage). All traits were analyzed assuming a model with sire and dam random effects that included effects of year and date of birth, sex, breed and year${\times}$sex interaction. Main effects were generally significant with few exceptions. Direct genetic effects were large for weight, height, girth and muscle with a breed trend from purebred Jersey (small) to purebred Limousin (large). At weaning, the maternal effect of the Jersey dam was positive for weight (10.9${\pm}$4.9 kg), girth (3.7${\pm}$1.0 cm) and muscle (6.0${\pm}$0.9%). Heterosis was highly significant and positive only for fat depth (1.5${\pm}$0.2 mm) with the $F_1$ progeny being the fattest, followed by the backcrosses, then purebred Jersey and purebred Limousin. Also, significant (p<0.001) but negative heterosis was observed for weight, girth and muscle. The change in ranking for fat depth relative to other traits is a reflection of the large heterotic effects relative to direct effects on fat depth. Epistatic effects were not significant on any trait at birth or weaning. This study has indicated the possibility of exploiting the positive heterotic and maternal effects for fat depth and muscularity to meet specific meat quality and quantity demand by consumers.

A Study on the Fabrication of the Low Noise Amplifier Using a Series Feedback Method (직렬 피드백 기법을 이용한 저잡음 증폭기의 구현에 관한 연구)

  • 김동일;유치환;전중성;정세모
    • Journal of the Korean Institute of Navigation
    • /
    • v.25 no.1
    • /
    • pp.53-60
    • /
    • 2001
  • This paper presents the fabrication of the LNA which is operating at 2.13 ~ 2.16 GHz for IMT-2000 front-end receiver using series feedback and resistive decoupling circuit. Series feedback added to the source lead of a GaAs FET keeps the low noise characteristics and drops the input reflection coefficient of a low noise amplifier simultaneously. Also, it increases the stability of the LNA. Resistive decoupling circuit is suitable for input stage matching because a signal at low frequency is dissipated by a resistor in the matching network. The amplifier consists of GaAs FET ATF-10136 for low noise stage and VNA-25 which is internally matched MMIC for high gain stage. The amplifier is fabricated with both the RF circuits and self bias circuit on the Teflon substrate with 3.5 permittivity. The measured results of the LNA which is fabricated using the above design technique are presented more than 30 dB in gain, PldB 17 dB and less than 0.7 dB in noise figure, 1.5 in inputㆍoutput SWR(Standing Wave Ratio).

  • PDF

CHEMICAL COMPOS IT80N OF AHCIENT CH INESE COINS RICOVIRID FROM THI SHINAN SHIPWRECK (신안침몰선 인양 중국 동전의 화학조성)

  • Lee, Chang-Kun;Kang, Dai-lll
    • 보존과학연구
    • /
    • s.10
    • /
    • pp.1-40
    • /
    • 1989
  • Between 1976 and 1984 approximately 26.7 tons of Chinese coins were recovered from a shipwreck which was found at the seabed of the Shin an area in the south-western coast of the Korean peninsula. Elements, Cu, Pb, Sn, Fe, Sb, As, Zn, Ag, Ni, Co and Mn, of 54 pieces of the coins were determined by Inductively Coupled Plasma Atomic Emission Spectroscopy(ICP-AIS). The result shows that Ch, Pb, and Sn were found to be major elements roughly the coins with the ratio of 7 : 2 : 1, respectively. Trace elements were classified into 3 levels according to the avarage concentration : Fe,As and Sb(0.1-0.5%), Ag, Mi, Co and Zn(100-1000ppm) and Mn(10ppm). Some systematic tendencies are observed in the composition change with a function of their minting ages .The Wuzhu coins(오수전) from the Eastern Han dynasty(A.D.25-219 )are much more abundant in Cu than the coins of Tang dynasty(A.D.618-907) and later periods. Major element compositions of the Kai -tong Vuan-Bao(개통원보) coins from the Tang dynasty, were remarkably variable. In general, however, the Tang dynasty coins were much more abundant in Cu than the Song dynasty(A.S.S60-1279) coins. The amount of major elements Cu and Sn decreases while that of Pb in creasesby passage of age from the Bei Song dynasty(A.D.960-1127) to later Nam Song dynasty (A.D.1127-1279 ). It means that the quality of coins mere degraded. The amounts of trace elemends(Fe, As, Co, Hn) increases with the above age. High amounts of trace elements are supposed to be a reflection of immaturity of minting techniques or use of impurity-rich raw materials. The Jin dynasty(A.D.1125-1234) coins are found to be rich in Sn and thus contain Pb as the third component. It is quite different from the coins of the Song dynasty. The Zhi-dai Tong-Bao(지대통보) coins of the Yuan dynasty from A.0.1310 are much more abundant in Cu and Sn than those of the Nam Song dynasty .

  • PDF

Analysis on Opportunity-to-learn context-based tasks provided by 'Probability and Statistics' textbooks ('확률과 통계' 교과서에 제시된 맥락 기반 과제의 학습기회 분석)

  • Choi, Heesun
    • Journal of the Korean School Mathematics Society
    • /
    • v.22 no.3
    • /
    • pp.241-256
    • /
    • 2019
  • In this paper, we analyzed the types of tasks presented in the 'Probability and Statistics' textbooks and how the cognitive competences required to perform the tasks provide students with opportunity-to-learn. To this end, the analysis of the 9 books of the 'Probability and Statistics' test textbooks according to the 2015 revised mathematics curriculum showed that the context-based tasks(CF type, RE type) ranged from 67.5% to 78.0% of the total number of tasks in each textbook, but the ratio of relevant and essential tasks related to real life is from 0.4% to 2.0%, it was found that most of the context-based tasks presented in the textbooks were disguised as real life materials. The cognitive competences of context-based tasks ranged from 29.6% to 50.0% in reproduction category, from 33.8% to 54.3% in connection category, and from 8.8% to 20.0% in reflection category. As a result, there was not enough opportunity-to-learn for students to experience reflective cognitive processes.

Effects of the Length and Diameter of Shock Tube on the Shock Train Phenomenon (충격파관의 길이와 직경이 Shock Train 현상에 미치는 영향)

  • Kim, Dong Wook;Kim, Tae Ho;Yoon, Young Bin;Kim, Heuy Dong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.41 no.9
    • /
    • pp.615-622
    • /
    • 2017
  • A normal shock wave is initially formed in the shock tube that migrates towards the closed end of the tube, which, in turn, leads to the reflection of shock. Due to the interaction of the reflected shock with the boundary layer, bifurcation of the shock wave takes place. A shock train will be generated after the bifurcated shock wave approaches the contact surface. Until now, only a few studies have been conducted to investigate this shock train phenomenon inside the shock tube. For the present study, a CFD analysis has been performed on a two dimensional axisymmetric model of a shock tube using unsteady, compressible Navier-Stokes equations. In order to investigate the detailed characteristics of the shock train phenomenon, quantitative studies have been performed by varying shock tube length, diameter under fixed diaphragm, and pressure ratio inside a shock tube.

Improvement of resistance performance of the 4.99 ton class fishing boat (4.99톤 어선의 저항성능 개선)

  • JEONG, Seong-Jae;AN, Heui-Chun;KIM, In-Ok;PARK, Chang-Doo
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.53 no.4
    • /
    • pp.446-455
    • /
    • 2017
  • The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

Prestack Reverse Time Migration for Seismic Reflection data in Block 5, Jeju Basin (제주분지 제 5광구 탄성파자료의 중합전 역시간 구조보정)

  • Ko, Chin-Surk;Jang, Seong-Hyung
    • Economic and Environmental Geology
    • /
    • v.43 no.4
    • /
    • pp.349-358
    • /
    • 2010
  • For imaging complex subsurface structures such as salt dome, faults, thrust belt, and folds, seismic prestack reverse-time migration in depth domain is widely used, which is performed by the cross-correlation of shot-domain wavefield extrapolation with receiver-domain wavefield extrapolation. We apply the prestack reverse-time migration, which had been developed at KIGAM, to the seismic field data set of Block 5 in Jeju basin of Korea continental shelf in order to improve subsurface syncline stratigraphy image of the deep structures under the shot point 8km at the surface. We performed basic data processing for improving S/N ratio in the shot gathers, and constructed a velocity model from stack velocity which was calculated by the iterative velocity spectrum. The syncline structure of the stack image appears as disconnected interfaces due to the diffractions, but the result of the prestack migration shows that the syncline image is improved as seismic energy is concentrated on the geological interfaces.

Analysis of Home Economics Textbooks for High School (고등학교 가정 교과서 분석 연구)

  • 윤인경
    • Journal of Korean Home Economics Education Association
    • /
    • v.10 no.2
    • /
    • pp.87-99
    • /
    • 1998
  • The purposes of the study are to see as to how much of changes has occurred in the newly revised high school Home Economics Textbooks required by the 6th Curriculum and to seek future policy directions which can be improved even better, if any, for further revision. To implement this proposal, the study employs 6 different textbooks published in 1996 geared for the 6th Curriculum for data base. The components of the contents divides into two major parts. The first part faUs into a category of holistic analysis of the textbooks, which gives a general perspective of the changes in the textbook revised. It includes those areas of changes in the total number of pacover page, illustrations, table of contents, appendices, unit cover, introductory remarks, summary and evaluation, etc. It also covers the information on authors of textbook. The latter part consists of several specific areas of major changes occurred in the textbooks for the 6th Curriculum. It covers such areas of changes in the composition of category and its weigh laboratory experiences, and illustrations and tables. To conclude the study, there found followings key features : 1) The new textbooks have adopted more of varieties in physical appearances and contents per se as to the older ones. And yet, there still found a weakness in numbers of authors participated to a full reflection of contents variety. In addition, the background of authors reflected on an unrealistic idealism which lacks the on-site information provided by the school teachers. 2) The content area consists of 3 major areas of Human Development & Family Relationship. Food and Nutrition. Clothing and Textiles with ratio of 23.8%, 23.1%, and 21.9% respectively. 3) Human Development & Family Relationship area ranked first with 71 times in the numbers of laboratory activities for each content area. followed by Food and Nutrition with 56 and Family Resorces & Consumerism with 54. These increased numbers of laboratory activities in textbooks represent the changing contents of Home Economics and imply the desirable and positive directions of Home Economics education in Korea. numbers of laboratory activities for each content area. followed by Food and Nutrition with 56 and Family Resorces & Consumerism with 54. These increased numbers of laboratory activities in textbooks represent the changing contents of Home Economics and imply the desirable and positive directions of Home Economics education in Korea.

  • PDF

Design and Performance Evaluation of MIMO Antenna for Handheld Devices (휴대 단말형 MIMO 안테나 설계 및 성능 평가)

  • Moon, Hyo-Sang;Jun, Kye-Suk;Lee, Bom-Son
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.12A
    • /
    • pp.1233-1241
    • /
    • 2008
  • We design, fabricate, and measure a MIMO antenna system mountable on a small PCB (such as UMPC). The proposed antenna system accommodates three radiation elements on the PCB area of $40mm\;{\times}\;100mm$. Two of them employ a slot type and one uses a modified monopole with an inverted L shape expecting high isolation and polarization purity. The bandwidth of each proposed MIMO antenna ranges from 80MHz and 200MHz at the center frequency of 1.8 GHz. The isolations between ports have been found to be greater than 10dB over the interested frequency band. Besides, the proposed MIMO system has been evaluated in terms of ARC(Active Reflection Coefficient, TARC(Total ARC), correlation, MEG, and etc. The envelope correlation is calculated to be much less than 0.04 and the ratio of the mean effective gain(MEG) between the antennas is found to be close to unity.