• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.276-282
• /
• 2013

This paper proposes an ultrasonic method for measurement of linear and hysteretic interfacial stiffness of contacting surfaces between two steel plates subjected to nominal compression pressure. Interfacial stiffness was evaluated by the reflection and transmission coefficients obtained from three consecutive reflection waves from solid-solid surface using the shear wave. A nonlinear hysteretic spring model was proposed and used to define the quantitative interfacial stiffness of interface with the reflection and transmission coefficients. Acoustic model for 1-D wave propagation across interfaces is developed to formulate the reflection and transmission waves and to determine the linear and nonlinear hysteretic interfacial stiffness. Two identical plates are put together to form a contacting surface and pressed by bolt-fastening to measure interfacial stiffness at different states of contact pressure. It is found from experiment that the linear and hysteretic interfacial stiffness are successfully determined by the reflection and transmission coefficient at the contact surfaces through ultrasonic pulse-echo measurement.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.1-6
• /
• 1997

A transmission type phase shift attenuator has a poor reflection characteristics at an output port. And that is controlled by the current, its dynamic rnage decreases due to the current limitation. In this paper, to avoid such disadvantages, a reflection type low phase shift attenuator has been designed and measured. As a result, at a center frequency (1855MHz), the sreflection type low pahse shift attenuator has an attenuation of 30dB, within the limit of 3 phase shift and less than -17dB reflection characteristics at both input and output ports. And it demonstrates the peformance of the reflection type low phase shift attenuator is better than the transmission type phase shift attenuator with the same measurement specifications.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.73-80
• /
• 2007

This paper aims to develop the diffused reflection material in order to reduce the solar absorption coefficient, and to compare the thermal properties with the different roof structure system; one is using the diffused reflection material applied the upper side of the rigid sheet waterproof system and the other is using the conventional up-side down waterproof system on the roof. For this purpose two experimental test boxes were made of same iso-panel wall and floor with different roof system. The experiment was carried out under these process; measure the surface temperature exposed solar radiation of the variation of the reflection materials(cement paste, silica, galvanized steel and titanium dioxide(TiO2)), measure and analyze the variation of the temperature distribution of the each roof system and indoor air in order to evaluate the thermal properties according to the different roof system. The result shows clearly that using the titanium dioxide(TiO2) might be more effective to reduce the solar insolation.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.192-195
• /
• 2008

We report on the spatial information of a coupling laser transfer into a reflected probe laser; the transfer is achieved by means of electromagnetically induced transparency through a common excited state connected with $5S_{1/2}-5P_{1/2}(F=1{\rightarrow}F'=2)$ in the $^{87}Rb\;D_1$ line. When the coupling laser was spatially modulated as a stationary wave, the absorption of the probe laser was enhanced and the reflection of the probe laser was generated. When the coupling laser was spatially modulated by a mask, we observed that the reflection light of the probe laser was modulated as the shape of the mask. The Bragg reflection transferred the spatial information of the coupling laser. The reflection was approximately 7% of the incident power of the probe laser.

• Journal of Astronomy and Space Sciences
• /
• 제9권1호
• /
• pp.30-40
• /
• 1992

세 종류의 식쌍성에 대한 반사 효과를 Wilson과 Devinney의 모델과 Russell과 Merrill의 모델로 분석하였다. 반사 효과를 Wilson과 Devinney의 광도 곡선 프로그램을 이용하여 이론적인 광도 곡선에 여러가지 유형별로 나타내었다. 그후 반사효과가 나타난 이론적인 광도 곡선을 Russell과 Merrill의 방법으로 근접 효과를 보정하여 두 모델을 비교 분석하였다. 두 별의 온도 차이와 반사도의 차이가 작은 경우에만 반사 효과에 관한한 두 모델이 일치함을 보였다.

• 한국수자원학회논문집
• /
• 제35권1호
• /
• pp.91-96
• /
• 2002

본 연구에서는 경계요소법을 이용하여 비스듬히 입사하는 파랑의 반사에 대하여 다루었으며, 비스듬히 입사하는 파랑이 정현파형 지형을 통과하는 경우 그 때의 반사율과 Bragg반사에 대하여 조사하였다. 특히, 비스듬히 입사하는 파랑의 Bragg반사를 발생시키는 파수를 계산하여 이론적인 결과와 비교하였다. 해석결과의 검증을 위하여 고유 함수전개법에 의한 정현파형 지형의 반사율과 본 모형의 결과를 비교하였으며, 전체적으로 본 연구의 결과는 기존의 연구결과들과 비교적 양호하게 일치하였다.

• 한국수자원학회논문집
• /
• 제32권4호
• /
• pp.447-455
• /
• 1999

본 연구에서는 Boussinesq방정식으로부터 유도한 지배방정식을 수치 적분하여 정현파형 지형이 일정한 경사에 놓여 있는 해저지형을 통과하는 크노이드파인 Bragg반사를 해석하였다. 지배방식에 포함된 급변항의 효과와 비선형성의 크기에 따른 Bragg반사를 해석하였다. 또한, 다양한 경사에 따른 반사율의 변화를 계산하여 반사율은 경사에 따라 크게 변화하지 않음을 밝혀냈다.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.121-127
• /
• 2000

In this paper a new technique of inverse fairing problem for ship hull is proposed. Recently Lu solved the inverse fairing problem for automobile's body that was made by one surface element. In this system however hull surface is constructed by Gregory's composite surface interpolation method. So reflection line at boundary position is used as a tool of solving inverse problem in surface fairing. But the results are not good. The new concepts of Normal vector line and Constrained reflection line are introduced as an alternative tool. Energy minimization method for Normal Vector Line curve net and the inverse method for Constrained Reflection Line by using optimization technique are examined And the final lines from this proposed surface fairing method shows good fairness.

• International Journal of Advanced Culture Technology
• /
• 제10권4호
• /
• pp.148-152
• /
• 2022

The purpose of this study was to investigate whether there is a difference in self-reflection and insight according to the performance level of college athletes. A total of 395 (210 male, 185 female) college athletes from 6 universities were sampled. The level of performance was divided into upper, middle, and lower groups based on the results of matches played in the past 1 year. To measure self-reflection and insight, THE SELF-REFLECTION AND INSIGHT SCALE developed by Grant et al. [4] was used. As a result, there was a statistically significant difference according to the level of performance, and as a result of post-hoc(scheffe) analysis, the upper group of performance was higher than that of the middle group and the lower group.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.65-74
• /
• 2023

Compared to epifluorescence(EPI) microscopy which captures fluorescence from the entire depth of sample, total internal reflection fluorescence(TIRF) can selectively visualize only a single surface of it. TIRF uses a thin evanescent field generated by the total internal reflection of laser light on surface. However, conventional TIRF system are designed for total internal reflection to occur at the upper surface of sample, making them unsuitable for sessile droplet imaging. We designed a TIRF system suitable for a sessile droplet imaging by utilizing slide glass as a lightguide. We presented the details for constructing the TIRF system using a prism, slide glass, air slit, and optical trap. Then, we compared the TIRF with EPI by imaging the droplet with fluorescent particles during its drying process. As a result, TIRF allows us to distinctly visualize the drying pattern on the bottom surface of droplet.