• 제목/요약/키워드: Reference signals

검색결과 613건 처리시간 0.03초

변형 비적 적응 필터의 수렴 특성 개선에 관한 연구 (A Study on the Convergence Characteristics Improvement of the Modified-Multiplication Free Adaptive Filer)

  • 김건호;윤달환;임제탁
    • 한국통신학회논문지
    • /
    • 제18권6호
    • /
    • pp.815-823
    • /
    • 1993
  • 본 논문에서는 곱셈연산이 필요치 안은 변형 비적 적응필터(MMADF : Modified Multiplication-free adaptive Filter) 알고리즘을 제안하고 수렴특성을 해석하였다. 제안한 구조는 DPCM(Differential Pulse Code Modulation)과 Sign 알고리듬을 이용한 MADF 구조에서 1차 필터를 첨가한 구조이다. 해석방법은 계수 비정렬벡터와 그 자기상관행렬의 수렴을 유도하였다. 수렴특성을 평가하기 위하여 분할등기(FSE : Fractionally Spaced Equallizer)에 적용하였으며, Sign 알고리듬, MADF 알고리듬, MMADF 알고리듬을 사용하여 정상상태오차와 수렴속도로 특성을 비교평가 하였다. MMADF 알고리듬을 FSE에 적용한 결과 안정된 수렴특성을 나타내었으며, 동일한 정상상태오차를 갖는 조건에서 시뮬레이션한 결과 기존의 Sign 및 MADF 알고리듬에 비해 신호특성 및 수렴속도가 개선 되었다.

  • PDF

A Novel Control Strategy of Three-phase, Four-wire UPQC for Power Quality Improvement

  • Pal, Yash;Swarup, A.;Singh, Bhim
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권1호
    • /
    • pp.1-8
    • /
    • 2012
  • The current paper presents a novel control strategy of a three-phase, four-wire Unified Power Quality (UPQC) to improve power quality. The UPQC is realized by the integration of series and shunt active power filters (APF) sharing a common dc bus capacitor. The realization of shunt APF is carried out using a three-phase, four-leg Voltage Source Inverter (VSI), and the series APF is realized using a three-phase, three-leg VSI. To extract the fundamental source voltages as reference signals for series APF, a zero-crossing detector and sample-and-hold circuits are used. For the control of shunt APF, a simple scheme based on the real component of fundamental load current (I $Cos{\Phi}$) with reduced numbers of current sensors is applied. The performance of the applied control algorithm is evaluated in terms of power-factor correction, source neutral current mitigation, load balancing, and mitigation of voltage and current harmonics in a three-phase, four-wire distribution system for different combinations of linear and non-linear loads. The reference signals and sensed signals are used in a hysteresis controller to generate switching signals for shunt and series APFs. In this proposed UPQC control scheme, the current/voltage control is applied to the fundamental supply currents/voltages instead of fast-changing APF currents/voltages, thus reducing the computational delay and the required sensors. MATLAB/Simulink-based simulations that support the functionality of the UPQC are obtained.

직접법에 의한 이산시간 기준모델 적응제어 시스템 설계에 관한 연구 (A Design of Discrete-Time Model Reference Adaptive Control System by Direct Method)

  • 김성덕
    • 한국통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.258-265
    • /
    • 1985
  • 이 論文은 SISO 離散時間 基準모델 適應制御시스템에 대한 設計問題를 다루었다. 基準모델과 未知시스템의 入·出力端에 狀態變數필터를 도입하므로서, 可用信號들로 구성된 아주 간단한 適應시스템을 구성할 수 있다. 未知시스템의 相對次數가 1 또는 2 이상인 경우의 設計法은 多數 발표되었으나, 構造가 매우 복잡하거나 設計理論이 일반화하지 못하였다. 본 論文에서는 相對次數가 2이상인 경우에 간단한 線型필터를 도입하므로서 適應構造를 간단히 구성할 수 있음을 證明하였다.

  • PDF

Output feedback-based model reference adaptive control for MIMO plants

  • Takahashi, Masanori;Mizumoto, Ikuro;Iwai, Zenta
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
    • /
    • pp.181-184
    • /
    • 1996
  • This paper deals with the design problem of model reference adaptive controllers for MIMO plants with unknown orders. A design scheme for an adaptive control system based on CGT theorem, which has hierarchical structures derived from backstepping strategies, is proposed for MIMO plants with unknown orders but with known relative MacMillan degrees(relative degrees for SISO plants). It is also shown that all the signals in the resulting control system are bounded, and that the asymptotic tracking is achieved in the case where reference inputs are step.

  • PDF

단상 전원 고조파 제거 시스템을 위한 기준전류 생성회로에 대한 연구 (A Study of the Current Reference Signal Generation Circuit for Single-Phase Harmonic Elimination Systems)

  • 정동열;박종연;김상훈;최원호
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권7호
    • /
    • pp.335-342
    • /
    • 2005
  • This paper presents a circuit to generate the current reference signal for single-phase harmonic elemination systems. Some of conventional methods for the current reference signal generation based on neural network algorithms. It requires complex circuitry to implement. the simplest method is to use analog filters. but it is difficult to obtain good current reference signals. So, we propose the harmonic detection circuit using GIC(Generalized Impedance Converter) for the purpose of low cost ,simple circuitry and high performance, Simulation and experimental results verify that the proposed circuit has better harmonic detection performance than conventional circuit.

미지입력을 포함한 시스템의 관측기 기반 견실고장진단 및 재구성 적응제어 (Observer-Based Robust Fault Diagnosis and Reconfigurable Adaptive Control for Systems with Unknown Inputs)

  • 최재원;이승우;서영수
    • 제어로봇시스템학회논문지
    • /
    • 제8권11호
    • /
    • pp.928-934
    • /
    • 2002
  • A natural way to cope with fault tolerant control (FTC) problems is to modify the control parameters according to an online identification of the system parameters when a fault occurs. However. due to not only difficulties Inherent to the online multivariable identification in closed-loop systems, such as modeling errors, noise or the lack of excitation signals, but also long time requirement to identify the post-fault system and implemeutation of control problems during the identification process, we propose an alternative approach based on the observer-based fault detection and isolation (FDI) and model reference adaptive control (MRAC). The proposed robust fault diagnosis method is based on a bank of observers. We also propose a model reference adaptive control with changeable reference models according to the occurred faults. Simulation results of a flight control example show the validity and applicability of the proposed algorithms.

Measurement and Analysis of the Korean NDGPS Radiation Spectrum

  • Kim, Young-Wan;Jee, Suk-Kun
    • Journal of information and communication convergence engineering
    • /
    • 제10권3호
    • /
    • pp.225-230
    • /
    • 2012
  • The Korean nationwide differential global positioning system (NDGPS) reference station transmits a global positioning system (GPS) enhancement signal using minimum shift keying modulation with a 200 bps data rate. The ocean-based DGPS covers the service area of 100 NM with 300 W output power; on the other hand, the land-based DGPS transmits the output power of 500 W, which covers the service area of 100 km. The DGPS reference stations with high output power can radiate spurious signals, which may act as interference sources affecting the other DGPS reference stations or the wireless ground stations that utilize the medium frequency band. In this paper, the radiation spectrums of the DGPS reference stations are measured and analyzed in the spurious domain. The DGPS radiation spectrums are evaluated from the perspective of the interference effect.

Fast Extraction of Symmetrical Components from Distorted Three-Phase Signals Based on Asynchronous-Rotational Reference Frame

  • Hao, Tianqu;Gao, Feng;Xu, Tao
    • Journal of Power Electronics
    • /
    • 제19권4호
    • /
    • pp.1045-1053
    • /
    • 2019
  • A symmetrical component decomposition scheme utilizing the characteristics of the asynchronous rotational reference frame transformation is proposed in this paper for the extraction of the positive and negative sequence components of distorted three-phase grid voltages. The undesired frequency component can be removed using a specially designed series coordinate transformation and half-cycle delays, where the delay can be controlled by adjusting the frequency of the rotating reference frame. The extracted symmetrical component can then be compensated based on the applied coordinated transformation. The dynamic response of the proposed algorithm is improved when compared to that of conventional methods. The effectiveness of the proposed algorithm is verified by simulation and experimental results.

실시간 기본주파수 추종방법에 근간한 조화 신호의 능동제어 (Active Control of Harmonic Signal Based on On-line Fundamental Frequency Tracking Method)

  • 김선민;박영진
    • 소음진동
    • /
    • 제10권6호
    • /
    • pp.1059-1066
    • /
    • 2000
  • 본 논문에서는 고조파 소음을 내는 시스템의 기본 주파수 추정을 통한 새로운 피드백 능동소음제어 방법을 제안한다. 기준신호를 측정하기 어려운 상황에서 종래의 다중 정현파 소음의 능동제어 방법은 기준신호를 측정하는 대신 추정된 주파수를 이용하여 기준신호를 만들어낸다.$^{(4)}$ 그러나 맥놀이현상(beating phenomenon)이 존재할 때는 순간적으로 특정 주파수 성분이 사라지게 되므로 적응 주파수 추정이 어렵게 되어 맥놀이현상에 의한 주파수 추정에서의 혼돈은 만들어진 기준신호를 쓸모없게 만든다. 제안된 알고리즘은 두 가지 부분으로 구성된다. 첫째는 기본주파수 추정을 이용한 기준신호 발생기이고 둘째는 기존의 피드포워드 제어 부분이다. 제안된 결정 규칙을 이용한 기본주파수 추정알고리즘은 맥놀이현상에 둔감할 뿐 아니라 기존의 직렬형 적응노치필터 방법에 비해 좋은 추종성능과 적은 주파수 추정 오차의 분산을 갖는다.$^{(4)}$ 더욱이 신호대잡음비가 좋지 않아 기존의 주파수 추정방법으로는 추정될 수 없는 주파수 성분가지 제어가 가능하다. 제안된 능동소음제어 방법의 성능을 검증하기 위해서 실측한 선박의 객실 소음과 자동차의 시변하는 엔진부밍소음에 대해서 모의 실험을 수행한다.

  • PDF

음향 기기 및 TV 방송 수신기의 내성 시험용 기준 신호 분석 (Analysis of Reference Signal for Immunity Test of Sound System and Television Broadcast Receiver)

  • 최수나;최성웅;박승근
    • 한국전자파학회논문지
    • /
    • 제23권7호
    • /
    • pp.805-814
    • /
    • 2012
  • 무선기기의 간헐적인 신호 또는 높고 낮은 진폭의 주기적인 신호 전송은 오디오 주파수에 간섭 신호를 발생시켜 근접 거리에 설치된 음향 기기에 잡음을 발생시킨다. 최근 이와 관련하여 Global system for Mobile Communication(GSM) 폰과 유사하게 간헐적인 신호 전송을 하는 Long Term Evolution(LTE) 폰에 의한 오디오 잡음현상이 보고되었다. 현재 국내 KN20 규격에서는 잡음에 대한 내성 능력을 확보하기 위하여 음향 및 TV 방송수신기의 내성 시험 기준 신호로 변조 주파수 1 kHz Amplitude Modulation(AM) 80 %와 Code Division Multiple Access(CDMA) 신호를 이용하고 있다. 본 논문에서는 LTE 폰의 출시에 따라 기존의 내성 기준 신호 AM과 CDMA를 GSM과 LTE 폰이 발생시키는 오디오 잡음의 수준과 비교한 후, 국내 음향 기기에 대한 내성 기준 신호의 개선을 제안한다. CDMA 신호는 음향 기기에 간섭을 거의 일으키지 않는 것으로 여겨지므로 시험 항목에서 삭제해도 무방할 것으로 판단된다. 반면, LTE는 많은 사용자가 이용하고 있으며, 음향 기기 등에 무시할 수 없는 간섭을 발생시킬 것으로 분석되므로 CDMA 신호를 대신하여 음향 기기 및 TV 방송 수신기의 내성 시험을 위한 시험 기준 신호로 규정하는 것이 바람직할 것으로 사료된다.