• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.5
• /
• pp.45-51
• /
• 1997

To trnsmit moving image signals by using an object vased coding technique at the rate of 8kbps~11kbps, it is very important to minimize the bit rates used for the compression of the color information of MF-objects. This paper proposes a hybrid coding method which uses the shpae adaptive coding method and the interframe reference method selectively. Gilge's shape adaptive orthogonal coidng method is utilized for shpae adaptive coding. The interfarame reference method approximates the low-passed signals of the image by gilge's shpae adaptive orthogonalization method and then refers the approximation error signals from the high frequency signal components of th eprevious frame. The proposed method achives the bit rates reduction of 17% compared to the gilge's shape adaptive orthogonalization method and 30% rduction compared to the shape adaptive DCT in average.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.995-1006
• /
• 2008

This article deals with the one-sided hypothesis testing problem in inverse Gaussian distribution. We propose Bayesian hypothesis testing procedures for the one-sided hypotheses of the shape parameter under the noninformative prior. The noninformative prior is usually improper which yields a calibration problem that makes the Bayes factor to be defined up to a multiplicative constant. So we propose the objective Bayesian hypothesis testing procedures based on the fractional Bayes factor, the median intrinsic Bayes factor and the encompassing intrinsic Bayes factor under the reference prior. Simulation study and a real data example are provided.

• Steel and Composite Structures
• /
• v.22 no.2
• /
• pp.387-398
• /
• 2016

In order to evaluate the effects of U shape ultra high performance concrete (UHPC) permanent form on the behaviors of Reinforced Concrete (RC) beam, a full scale RC composite beam is designed and tested with U shape UHPC permanent form and a reference RC beam with same parameters is tested simultaneously for comparison. The effects of the permanent form on the failure mode, cracking strength, ultimate capacity and deformation are studied. Test results shows that the contributions of the U shape UHPC permanent form to the flexural cracking behaviors of RC beam are significant. This study may provide a reference for the design of sustainable RC beam with high durable UHPC permanent form.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.1
• /
• pp.171-178
• /
• 2013

In this paper, we develop noninformative priors for the generalized Pareto distribution when the parameter of interest is the shape parameter. We developed the first order and the second order matching priors.We revealed that the second order matching prior does not exist. It turns out that the reference prior satisfies a first order matching criterion, but Jeffrey's prior is not a first order matching prior. Some simulation study is performed and a real example is given.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.642-649
• /
• 2011

Among the various aspects of offline handwritten character patterns, it is the great variety of writing styles and variations that renders the task of computer recognition very hard. The immense variety of character shape has been recognized but rarely studied during the past decades of numerous research efforts. This paper tries to address the problem of measuring image distortions and handwritten character patterns with respect to reference patterns. This work is based on mass-spring mesh model with the introduction of simulated electric charge as a source of the external force that can aid decoding the shape distortion. Given an input image and a reference image, the charge is defined, and then the relaxation procedure goes to find the optimum configuration of shape or patterns of least potential. The relaxation process is based on the fourth order Runge-Kutta algorithm, well-known for numerical integration. The proposed method of modeling is rigorous mathematically and leads to interesting results. Additional feature of the method is the global affine transformation that helps analyzing distortion and finding a good match by removing a large scale linear disparity between two images.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.731-734
• /
• 1997

In this study, a shape optimization is performed for circular and elliptical holes to reduce weight of a plate. It is accomplished in reference to the results of topology optimization of the square plate with circular hole. From the results. it is concluded that the stress values of shape optimization of them are satisfied with 100MPa of constraint condition.

• Journal of the Korean Geographical Society
• /
• v.43 no.1
• /
• pp.71-86
• /
• 2008

The ambiguity of spatial language can be a source of communication problems. For instance, the 'the opposite side' in a sentence such as 'where is the opposite side of building X' can mean more than one direction. Research interests are focused on the directions of a spatial language 'the opposite side'. This study also explored the effect of geometric properties such as reference object's shape and distance from the reference object and spatial reference frame in the comprehension of 'the opposite side'. The assessment tasks used consisted of rating how appropriate the sentence 'where is the opposite side of building X' was to describe a series of pictures. The results of experiment suggest that 'the opposite side' means in most cases more than one direction simultaneously. Changing spatial reference frame has significant effects on individuals' rating of the tasks. However, while reference object's shape (prolonged building) has a consistent effect of the ratings given, the distance from the reference object (shortened road width) has limited influence in comprehending the tasks.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.439-442
• /
• 2007

A solid state Hg(Au)/HgO reference electrode was prepared utilizing gold amalgam solid particles. Solid fine powder of the gold amalgam was prepared by chemical reduction of Au(III) with NaBH4 followed by reduction of Hg(II) in the presence of gold fine particles. The solid content in the suspension of the gold amalgam particles and fine mercury oxide particles in DMF containing PVC was precipitated by the addition of a large amount of water to give solid Hg(Au)/HgO/PVC mixture. After drying, the mixture was pressure-molded to a physically stable Hg(Au)/HgO composite reference electrode material. The electrochemical characteristics of the electrode as a reference electrode were very similar to an ordinary Hg/HgO reference electrode. The electrode material can be molded and fabricated in any desired shape and size. The surface can be renewed by a simple polishing process whenever contaminated or deactivated. The applicability of the electrode in the electrochemical detection of carbohydrates after anion exchange separation was evaluated.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1602-1607
• /
• 2003

Vibration causes noise and sometimes makes structure unstable. Especially, due to the efforts of lightening, deformation of flexible structure is increased in its shape. Just a little disturbance can cause vibration and low damping ratio makes residual vibration last long time. This research is concerned with the model reference neuro-controller design for the vibration suppression of smart structures. By using a model reference neurocontroller, which is one of the algorithms of adaptive control, we performed an adaptive control of flexible cantilever plate and opened box structure with piezoelectric materials. The proposed adaptive vibration control algorithm, a model reference neuro-controller, was proved in its effectiveness by applying to an opened box structure. The model reference neuro-controller is implemented with DSP, and the real-time adaptive vibration control experiment results confirm that the model reference neuro-controller is reliable.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.1008-1022
• /
• 2007

The purpose of this study is to propose apparel sizing system for each body shape of early adolescent boys. The subjects of this study were 549 boys in the capital area. Their body shapes were classified and apparel sizing system was proposed for each body shape. For data analysis were performed descriptive statistics, correlation analysis and crosstabulation using SPSS Ver. 12. The control dimensions to propose apparel sizing system were stature and bust circumference for the upper garments. Intervals between sizes were 5cm for stature and irregular for bust circumference. For each type, $5{\sim}7$ sizes were proposed for upper garments. Reference measurements suggested for upper garments were 9 items. This study is meaningful in that it classified early adolescent boys' body shapes and proposed apparel sizing system for each type of body shape under the current circumstances where basic data for body shape classification and apparel sizing system of early adolescent boys were not in place.