1 |
Benjamin, A.G. (2006), "Structural behavior of ultra-high performance concrete prestressed I-girders", FHWA-HRT-06-115, Federal Highway Administration, New Jersey Ave., SE Washington, USA.
|
2 |
Bencardino, F. (2013), "Mechanical parameters and post-cracking behavior of HPFRC according to threepoint and four bending test", Adv. Civil Eng., 1-9.
|
3 |
Bencardino, F. and Condello, A. (2014), "Experimental study and numerical investigation of behavior of RC beams strengthened with steel reinforced grout", Comput. Concrete, Int. J., 14(6), 711-725.
DOI
|
4 |
Guler, S., Copur, A. and Aydogan, M. (2012), "Flexural behaviour of square UHPC-filled hollow steel section beams", Struct. Eng. Mech., Int. J., 43(2), 225-237.
DOI
|
5 |
Guler, S., Copur, A. and Aydogan, M. (2013), "Nonlinear finite element modeling of FRP-wrapped UHPC columns", Comput. Concrete, Int. J., 12(4), 413-429.
DOI
|
6 |
Habel, K. (2004), "Structural behaviour of element combining ultra-high performance fibre reinforced concretes(UHPFRC) and reinforced concrete", Ph.D. Dissertation; Ecol Polytechnique Federal de Lausanne, Lausanne, Switzerland.
|
7 |
Hong, S.G. and Kang, S.H. (2013), "Formwork development using UHPFRC", Proceedings of the Rilemfib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Marseille, France, October.
|
8 |
Lou, T., Lopes, S.M.R. and Lopes, A.V. (2015), "Redistribution of moments in reinforced high-strength concrete beams with and without confinement", Struct. Eng. Mech., Int. J., 55(2), 379-398.
DOI
|
9 |
Massicotte, B., Dagenais, M.A. and Lagier, F. (2013a), "Strengthening Bridge Piers using Ultra High Performance Fiber Reinforced Concrete", Proceeding of the 7th National Seismic Conference on Bridges and Highways, Oakland, CA, USA, May.
|
10 |
Massicotte, B., Dagenais, M.A. and Lagier, F. (2013b), "Performance of UHPFRC jackets for the seismic strengthening of bridge piers", Proceedings of the Rilem-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Marseille, France, October.
|
11 |
Mohanammed, T.J., Abu Bakar, B.H. and Bunnori, N.M. (2015), "Strengthening of reinforced concrete beams subjected to torsion with UHPFC composites", Struct. Eng. Mech., Int. J., 56(1), 123-136.
DOI
|
12 |
Noshiravani, T. and Bruhwiler, E. (2013), "Experimental investigation on reinforced ultra-high-performance fiber-reinforced concrete composite beams subjected to combined bending and shear", ACI Struct. J., 110(2), 251-261.
|
13 |
Rizzuti, L. and Bencardino, F. (2014), "Effect of fibre volume fraction on the compressive and flexural experimental behavior of SFRC", Contemporary Eng. Sci., 7, 379-390.
DOI
|
14 |
Wu, X.G., Han, S.M. and Xu, S.L. (2008), "Pseudo strain hardening model of ultra high performance cementitious composites under flexural loading", Acta Materiae Compositae Sinica, 25(2), 129-134.
|
15 |
Wu, X.G., Zhao, X.Y. and Han, S.M. (2011), "Structural analysis of circular UHPC form for hybrid pier under construction loads", Steel Compos. Struct., Int. J., 12(2), 167-180.
|
16 |
Wu, X.G., Yu, Q., Zhao, X.Y., Zheng, W.Z. and Han, S.M. (2013a), "Uniaxial compressive strength of durable hybrid pier with UHPC permanent form", Proceedings of the Rilem-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Marseille, France, October.
|
17 |
Yuan, F., Pan, J.L. and Leung, C.K.Y. (2013), "Flexural behaviors of ECC and concrete /ECC composite beams reinforced with basalt fiber reinforced polymer", J. Compos. Construct., 17(5), 591-602.
DOI
|
18 |
Wu, X.G., Yang, J. and Mpalla, I.B. (2013b), "Preliminary design and structural responses of typical hybrid wind tower made of ultra high performance cementitious composites", Struct. Eng. Mech., Int. J., 48(6), 791-807.
DOI
|
19 |
Wu, X.G., Hu, Q., Zou, R.F., Zhao, X.Y. and Yu, Q. (2014), "Structural behaviors of sustainable hybrid columns under compression and flexure", Struct. Eng. Mech., Int. J., 52(5), 857-873.
DOI
|
20 |
Wirojjanapirom, P., Matsumoto, K. and Niwa, J. (2013), "Experimental Study on Shear Behavior of RC Beams Using U-Shape UFC Permanent Formwork with Shear Keys and Bolts", J. Japan Soc. Civil Eng., Ser. E2 (Materials and Concrete Structures), 69(1), 67-81.
DOI
|
21 |
Yuan, F., Pan, J.L., Dong L.T. and Leung, C.K.Y. (2014), "Mechanical Behaviors of Steel Reinforced ECC or ECC/Concrete Composite Beams under Reversed Cyclic Loading", J. Mater. Civil Eng., 26(8), 86-88.
|