• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.259-261
• /
• 2000

UPFC(Unified Power Flow Controller) consists of two voltage sourced converter(VSC)s inserted into AC system through series and parallel coupling transformer, where two VSCs are linked by capacitor at DC-side. Since VSC acts as an AC voltage source behind a reactance, where both magnitude and phase angle of the source are controllable, UPFC can be represented by the equation related to input-output relation of two VSCs. Voltage control of DC-link capacitor provides the path of real power flow between two VSCs. While UPFC is controlled for maintaining the given reference value in steady state, it should be controlled for damping power oscillation in dynamics. For such a control objective, the control strategy based on the energy function was proposed and has been shown to be effect and robust for damping power oscillation of power system. In this paper, UPFC model based on the VSC was analysed and applied to power-flow control and stability analysis. The control strategy based on the energy function is adopted for damping power oscillation of power system. The effectiveness of proposed control strategy was verified by simulation study

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.748-751
• /
• 2006

Positioning accuracy by the Global Positioning System (GPS) is of great concern in a variety of research tasks. It is limited due to error sources such as ionospheric effect, orbital uncertainty, antenna phase center variation, signal multipath, and tropospheric influence. In this study, the tropospheric influence, primarily due to water vapour inhomogeneity, on GPS positioning height is investigated. The data collected by the GPS receivers along with co-located surface meteorological instruments in 2003 are utilized. The GPS receivers are established as continuously operating reference stations by the Ministry of the Interior (MOI), Central Weather Bureau (CWB), and Industrial Technology Research Institute (ITRI) of Taiwan, and International GNSS Service (IGS). The total number of GPS receivers is 21. The surface meteorological measurements include temperature, pressure, and humidity. They are introduced to GPS data processing with 24 troposphere parameters for the station heights, which are compared with those obtained without a priori knowledge of surface meteorological measurements. The results suggest that surface meteorological measurements have an expected impact on the GPS height. The daily correction maximum with the meteorological effect may be as large as 9.3 mm for the cases of concern.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.167-178
• /
• 2004

The purpose of this study was to describe and compare the selected electromyographical muscle activities of trunk and hip during Professional and Amateur golfer's Iron swing. Using surface electromyography, we evaluated muscle activities in 6 male professional golfers and 6 male amateur golfers during the golf iron swing. Surface electrodes were used to record the level of muscle activity in the right abdominal oblique, left abdominal oblique, right erector spinae, left erector spinae, right rectus abdominis, left rectus abdominis, right gluteus maximus, left gluteus maximus muscles during the golfer's swing. These signals were compared with IEMG(Integrated EMG) which was normalized by %RVC(Reference voluntary contraction). The golf swing was divided into three phases: take away, forward swing-acceleration, follow-through. We observed patterns of trunk muscle activity throughout three phases of the golf swing. The results can be summarized as follows: LES(Left Erector spinae) had statistically significant difference in take away and forward swing-acceleration phases. It was showed no significant difference in follow-through phase.

• Korean Journal of Materials Research
• /
• v.17 no.6
• /
• pp.323-330
• /
• 2007

We fabricated thermaly evaporated 10 nmNi/(poly)Si films to investigate the energy saving property of silicides formed by rapid thermal annealing (RTA) at the temperature of $300{\sim}1200^{\circ}C$ for 40 seconds. Moreover, we fabricated $10{\sim}50$ nm-thick ITO/Si films with a rf-sputter as reference films. A four-point tester was used to investigate the sheet resistance. A transmission electron microscope (TEM) and an X-ray diffractometer were used for the determination of cross sectional microstructure and phase changes. A UV-VISNIR and FT-IR (Fourier transform infrared rays spectroscopy) were employed for near-IR and middle-IR absorbance. Through TEM analysis, we confirmed $20{\sim}70nm-thick$ silicide layers formed on the single and polycrystalline silicon substrates. Nickel silicides and ITO films on the single silicon substrates showed almost similar absorbance in near-IR region, while nickel silicides on polycrystalline silicon substrate showed superior absorbance above 850 nm near-IR region to ITO films. Nickel silicide on polycrystalline substrate also showed better absorbance in middle IR region than ITO. Our result implies that nano-thick nickel silicides may have exellent absorbing capacity in near-IR and middle-IR region.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8419-8423
• /
• 2016

Purpose: Anti-cancer activity evaluation of aqueous extract of CRUEL (herbomineral formulation) capsules on renal cell carcinoma cell lines, and exploration of mechanisms of cell death. Materials and Methods: To detect the cytotoxic dose concentration in renal cell carcinoma (RCC) cells, MTT assays were performed and morphological changes after treatment were observed by inverted microscopy. Drug effects against RCC cell lines were assessed with reference to cell cycle distribution (flow cytometry), anti-metastatic potential (wound healing assay) and autophagy(RT-PCR). Results: CRUEL showed anti-proliferative effects against RCC tumor cell lines with an IC50 value of ${\approx}4mg/mL$ in vitro., while inducing cell cycle arrest at S-phase of cell cycle and inhibiting wound healing. LC3 was found to be up-regulated after drug treatment in RT-PCR resulting in an autophagy mode of cell death. Conclusions: This study provides the experimental validation for antitumor activity of CRUEL.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.63-67
• /
• 2009

Current mismatch in a charge pump causes degradation in spectral purity of the phase locked loops(PLLs), such as reference spurs. The current mismatch can be reduced by increasing the output resistance of the charge pump, as in a cascoded output stage. However as the supply voltage is lowered, it is hard to stack transistors. In this paper, a new method for reducing the current mismatch is proposed. The proposed method is based on a feed-forward compensation for the channel length modulation effect of the output stage. The new method has been demonstrated through simulations on typical $0.18{\mu}m$ CMOS circuits.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.37-44
• /
• 2014

In this paper we present an LDO based on an error amplifier. The designed error amplifier has a gain of 89.93dB at low frequencies. This amplifier's Bandwidth is 50.8MHz and its phase margin is $59.2^{\circ}C$. Also we proposed a BGR. This BGR has a low output variation with temperature and its PSRR at 1 KHz is -71.5dB. For a temperature variation from $-40^{\circ}C$ to $125^{\circ}C$ we have just 9.4mV variation in 3.3V LDO output. Also it is stable for a wide range of output load currents [0-200mA] and a $1{\mu}F$ output capacitor and its line regulation and especially load regulation is very small comparing other papers. The PSRR of proposed LDO is -61.16dB at 1 KHz. Also we designed it for several output voltages by using a ladder of resistors, transmission gates and a decoder. Low power consumption is the other superiority of this LDO which is just 1.55mW in full load. The circuit was designed in $0.35{\mu}m$ CMOS process.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.93-98
• /
• 2016

A large number of victims or witnesses to incidents and accidents should visit a police station and fill the decree stated. Stated decree workaround discomfort and hygienic problems in unnecessary step process using the fingerprint after you modify the modified portion when due modify the request as of the import or typos recognized that modifications and police in the. Stated decree in the investigation phase when creating KICS and electronic Resources investigation into the identity of the one-touch fingerprint reader linked with the introduction table system and thinning, which can simplify the day of the procedure.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.57-63
• /
• 2011

Crocidolite quality control (QC) sampling created by the wet generation method has been validated by validation tests such as the accuracy, precision, and storage tests. For this study we designed and developed a manufacturing apparatus and standard operating procedure for making these QC samples. The most important step in the procedure of making QC samples was the stage eliminating static electricity in asbestos fibers. This static electricity hampers the fibers clog functioning. In accuracy and precision tests by phase contrast microscopy analysis, the difference between the reference values and the studied values was at maximum 17.8%. This satisfies the AIHA proficiency analytical test criteria for asbestos. We could confirm the nearly even distribution of crocidolite fibers on the membrane filter. Also, there was no loss of fibers in the storage test after the one month.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.41.1-41.1
• /
• 2016

The Galactic center, Sagittarius A* (Sgr A*), is the closest supermassive black hole and emits synchrotron radiation. It provides great opportunity to study the origin of mm/sub-mm emission. Currently, two competing models have been suggested as a jet base and a radiatively inecient accretion flow (RIAF). To unveil the properties, the extremely high resolution(${\sim}10{\mu}as$) corresponding to the projected Schwarzschild radius of ~0.1AU is necessary. With KVN, a jet model can be tested by multi- frequency simultaneous observations because the optically thick surface in a jet (i.e. radio core) moves toward the center at a higher frequency. We conducted 8 observations with KVN at 43/86GHz in 2015, and found that the measured positional shift to the reference calibrator, J1744-3116, was ~0.3 mas to the south of Sgr A* using the source frequency phase referencing (SFPR) at Q/W bands for the first time. With the result, in the future, we will attempt to measure the variation of source position shifts that can constrain the direction of approaching jets and the variability of black hole activity of Sgr A*.