• 제목/요약/키워드: Reference intervals

검색결과 296건 처리시간 0.021초

연산지연시간과 파라미터 변동에 강인한 UPS 인버터의 내부모델제어 (Internal Model Control of UPS Inverter with Robustness of Calculation Time Delay and Parameter Variation)

  • 박지호;계중읍;김동완;안영주;박한석;우정인
    • 전기학회논문지P
    • /
    • 제51권4호
    • /
    • pp.175-185
    • /
    • 2002
  • In this paper, a new fully digital current control method of UPS inverter, which is based on an internal model control, is proposed. In the proposed control system, overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The internal model controller is adopted to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. That is, the average current of filter capacitor is been exactly equal to the reference current with a time lag of two sampling intervals. Therefore, this method has an essentially overshoot free reference-to-output response with a minimum possible rise time. The effectiveness of the proposed control system has been verified by the simulation and experimental respectively. From the simulation and experimental results, the proposed system is achieved the robust characteristics to the calculation time delay and parameter variation as well as very fast dynamic performance, thus it can be effectively applied to the power supply for the critical load.

철도기준점을 활용한 지오이드고의 추정 (Geoid Height Estimation Using Rail-road Reference Points)

  • 허준;송영선;김성훈;문정균
    • 한국철도학회논문집
    • /
    • 제12권4호
    • /
    • pp.499-505
    • /
    • 2009
  • 본 연구에서는 지오이드고 산정을 위해서 철도기준점의 활용가능성을 평가하였다. 사용된 자료는 호남고속철도 건설을 위해서 구축된 철도기준전점으로써 GPS/Leveling에 의해 산정된 타원체고와 수준측량에 의한 정표고에 대한 정보를 포함하고 있다. 360개의 철도기준점의 타원체고와 정표고를 이용하여 지오이드고를 산정하고, 산정된 지오이드고를 이용하여 공간처리방법별로 정확도 및 철도기준점의 간격에 따른 오차를 평가하였다. 그 결과 공간처리연산자에 따른 오차는 거의 유사하였고, 기준점 간격별 분석에서는 $0{\sim}4km$구간에서는 2cm, $5{\sim}8km$ 구간에서는 3cm의 오차범위안에서 지오이드고가 결정됨을 알 수 있었다. 이와 같은 연구결과를 통해 철도층량에 있어 GPS측량과 지오이드보간을 활용한 수준측량을 활용할 수 없음을 확인할 수 있었다.

Evaluation of Submucosal or Lymphovascular Invasion Detection Rates in Early Gastric Cancer Based on Pathology Section Interval

  • Kim, Young-Il;Kook, Myeong-Cherl;Choi, Jee Eun;Lee, Jong Yeul;Kim, Chan Gyoo;Eom, Bang Wool;Yoon, Hong Man;Ryu, Keun Won;Kim, Young-Woo;Choi, Il Ju
    • Journal of Gastric Cancer
    • /
    • 제20권2호
    • /
    • pp.165-175
    • /
    • 2020
  • Purpose: The guidelines for pathological evaluation of early gastric cancer (EGC) recommend wider section intervals for surgical specimens (5-7 mm) than those for endoscopically resected specimens (2-3 mm). Studies in surgically resected EGC specimens showed not negligible lymph node metastasis risks in EGCs meeting the expanded criteria for endoscopic submucosal dissection (ESD). Materials and Methods: This retrospective study included 401 EGC lesions with an endoscopic size of ≤ 30 mm detected in 386 patients. Pathological specimens obtained by ESD or surgery were cut into 2-mm section intervals for reference. Submucosal or lymphovascular invasion (LVI) was evaluated arbitrarily in 4- or 6-mm section intervals. McNemar's tests compared the differences between submucosal and LVI. Results: Submucosal invasion was detected in 29.2% (117/401) and LVI in 9.5% (38/401) at 2-mm interval. The submucosal invasion detection rates in 4-mm intervals decreased to 88.0% or 90.6% (both P<0.001), while the LVI detection rates decreased to 86.8% or 57.9% (P=0.025 and P<0.001, respectively). In 6-mm intervals, the submucosal and LVI detection rates decreased further to 72.7-80.3% (P<0.001 for all three sets) and 55.3-63.2% (P<0.001 for all three sets), respectively. Among 150 out-of-indication cases at 2-mm interval, 4-10 (2.7%-6.7%) at 4-mm intervals, and 10-17 (6.7%-11.3%) at 6-mm intervals were misclassified as lesions meeting the curative resection criteria due to the underestimation of submucosal or LVI. Conclusions: After ESD, the 2-mm wide section interval was suitable for the pathological evaluation of focal submucosal or LVI. Thus, if an EGC lesion meets the expanded criteria for the ESD specimen pathological evaluation, it could be safely followed up.

Real-time GPS Ionospheric TEC Estimation over South Korea

  • Choi, Byung-Kyu;Yoo, Sung-Moon;Roh, Kyoung-Min;Lee, Sang-Jeong
    • Journal of Astronomy and Space Sciences
    • /
    • 제30권3호
    • /
    • pp.207-212
    • /
    • 2013
  • Ionosphere is one of the largest error sources when the navigational signals produced by Global Positioning System (GPS) satellites are transmitted. Therefore it is very important to estimate total electron contents (TEC) in ionosphere precisely for navigation, precise positioning and some other applications. When we provide ionospheric TEC values in real-time, its application can be expanded to other areas. In this study we have used data obtained from nine Global Navigation Satellite System (GNSS) reference stations which have been operated by Korea Astronomy and Space Science Institute (KASI) to detect ionospheric TEC over South Korea in real-time. We performed data processing that covers converting 1Hz raw data delivered from GNSS reference stations to Receiver INdependent Exchange (RINEX) format files at intervals of 5 minutes. We also analyzed the elevation angles of GPS satellites, vertical TEC (VTEC) values and their changes.

Development of Matching Priors for P(X < Y) in Exprnential dlstributions

  • Lee, Gunhee
    • Journal of the Korean Statistical Society
    • /
    • 제27권4호
    • /
    • pp.421-433
    • /
    • 1998
  • In this paper, matching priors for P(X < Y) are investigated when both distributions are exponential distributions. Two recent approaches for finding noninformative priors are introduced. The first one is the verger and Bernardo's forward and backward reference priors that maximizes the expected Kullback-Liebler Divergence between posterior and prior density. The second one is the matching prior identified by matching the one sided posterior credible interval with the frequentist's desired confidence level. The general forms of the second- order matching prior are presented so that the one sided posterior credible intervals agree with the frequentist's desired confidence levels up to O(n$^{-1}$ ). The frequentist coverage probabilities of confidence sets based on several noninformative priors are compared for small sample sizes via the Monte-Carlo simulation.

  • PDF

발전용 최적 Soot Blowing 시스템 개발 (The Development of Optimal Soot Blowing System for Power Plant)

  • 김성호;정해원;육심균
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.897-902
    • /
    • 2001
  • SBOS(Soot blower Optimum System) analyzes the accumulated fouling rate of a coal-fired boiler plant at short intervals, compares it with a reference data, and determines the optimal time of soot blowing. In this paper, ANFIS algorithm which is an optimal algorithm to detect variation of boiler performance with time, updating the reference data and to eliminate the effects of noise in field signal is used to clean heating surface and to reduce steam needed to blow the soot.

  • PDF

KOMPSAT EOC Grid Reference System

  • Kim, Youn-Soo;Kim, Yong-Seung;Benton, William
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.349-354
    • /
    • 1998
  • The grid reference system (GRS) has been useful for identifying the geographical location of satellite images. In this study we derive a GRS for the KOMPSAT Electro-Optical Camera (EOC) images. The derivation substantially follows the way that SPOT defines for its GRS, but incorporates the KOMPSAT orbital characteristics. The KOMPSAT EOC GRS (KEGRS) is designed to be a (K,J) coordinate system. The K coordinate parallel to the KOMPSAT ground track denotes the relative longitudinal position and the J coordinate represents the relative latitudinal position. The numbering of K begins with the prime meridian of K=1 with K increasing eastward, and the numbering of J uses a fixed value of J=500 at all center points on the equator with J increasing northward. The lateral and vertical intervals of grids are determined to be 12.5 km about at the 38$^{\circ}$ latitude to allow some margins for the value-added processing. The above design factors are being implemented in a satellite programming module of the KOMPSAT Receiving and Processing System (KRPS) to facilitate the EOC data collection planning over the Korean peninsula.

  • PDF

BAYESIAN INFERENCE FOR FIELLER-CREASY PROBLEM USING UNBALANCED DATA

  • Lee, Woo-Dong;Kim, Dal-Ho;Kang, Sang-Gil
    • Journal of the Korean Statistical Society
    • /
    • 제36권4호
    • /
    • pp.489-500
    • /
    • 2007
  • In this paper, we consider Bayesian approach to the Fieller-Creasy problem using noninformative priors. Specifically we extend the results of Yin and Ghosh (2000) to the unbalanced case. We develop some noninformative priors such as the first and second order matching priors and reference priors. Also we prove the posterior propriety under the derived noninformative priors. We compare these priors in light of how accurately the coverage probabilities of Bayesian credible intervals match the corresponding frequentist coverage probabilities.

Efficient methods for integrating weight function: a comparative analysis

  • Dubey, Gaurav;Kumar, Shailendra
    • Structural Engineering and Mechanics
    • /
    • 제55권4호
    • /
    • pp.885-900
    • /
    • 2015
  • This paper introduces Romberg-Richardson's method as one of the numerical integration tools for computation of stress intensity factor in a pre-cracked specimen subjected to a complex stress field across the crack faces. Also, the computation of stress intensity factor for various stress fields using existing three methods: average stress over interval method, piecewise linear stress method, piecewise quadratic method are modified by using Richardson extrapolation method. The direct integration method is used as reference for constant and linear stress distribution across the crack faces while Gauss-Chebyshev method is used as reference for nonlinear distribution of stress across the crack faces in order to obtain the stress intensity factor. It is found that modified methods (average stress over intervals-Richardson method, piecewise linear stress-Richardson method, piecewise quadratic-Richardson method) yield more accurate results after a few numbers of iterations than those obtained using these methods in their original form. Romberg-Richardson's method is proven to be more efficient and accurate than Gauss-Chebyshev method for complex stress field.

면역비탁법에 의한 HbA1c의 참고범위 설정 (Obtaining Reference Intervals of HbA1c by Immunoturbidimetry)

  • 김재섭;박기현;유선우;이범희
    • 대한임상검사과학회지
    • /
    • 제41권2호
    • /
    • pp.62-66
    • /
    • 2009
  • HbA1c is the major fraction of glycated hemoglobin, and used primarily to identify the average plasma glucose concentration over prolonged periods of time, mostly 2-3 months. It is used as markers for the diagnosis and monitoring of diabetic patients and increasingly used a marker in health screening check up for general populations. In this study, HbA1c was measured with Cobas integra 800 (Roche Diagnostics, Mannheim, Germany), using immunoturbidimetry principles. We established the reference interval for HbA1c with Cobas integra 800 and evaluated its significance. The study subjects were 36,140 (male 57.5%, and female 42.2%) who visited the Health Promotion Center of a tertiary care center in Seoul for health checkup from January to September, 2008. HbA1c levels were measured with immunoturbidimetric method. Statistical evaluation was done with SPSS. Comparison between male and female was checked with Mann-Whitney test, and among age groups with Kruskal-Wallis test. Reference interval for HbA1c was from 4.8% to 6.1%. There was no significant difference between male and female with Mann-Whitney test (P=0.539). There was significant difference among age groups with Kruskal-Wallis test (P<0.05). Reference interval for HbA1c with Cobas integra 800 was 4.8~6.1%, which was different from conventional one, 4.4-6.4%. Establishment of reference interval for each principle is needed.

  • PDF