• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.38-44
• /
• 1998

대용량의 음성합성용 데이터베이스를 용이하게 구축하기 위해 음성인식 시스템을 이용한 음소 경계 분할이 이루어지고 있다. 그러나 자동 분할 결과를 직접 이용하여 합성음 을 생성할 경우 음소 경계 에러로 인하여 접합 왜곡이 많이 발생하게 된다. 이러한 문제를 해결하기 위해서, 본 연구에서는 단위 접합시 경계 에러를 고려하여 적합한 접합 위치를 찾 고자 하였다. 여기서 적합한 접합 위치는 스펙트럼의 불연속이 최소화된 접합점을 의미한다. 합성음에 대한 MOS(Mean Opinion Score) 테스트와 스펙트로그램(spectrogram)의 모양을 비교하므로써 제안된 방법의 성능을 평가하였다. 제안된 방법은 두 단계로 이루어져 있다. 첫째, 레퍼런스 패턴(reference pattern)과 두 개의 테스트 패턴(test pattern)을 선택하는 단 계와, 둘째, 앞과 뒤 테스트 패턴 사이의 적합한 접합위치를 찾는 단계이다. 본 연구에서는 패턴 사이의 스펙트로그램 비교를 위해 켑스트럼(cepstrum) 피라미터와 패턴 분류기 (pattern classifier)인 DTW(Dynamic Time Warping) 알고리즘을 사용하였다. 제안된 알고 리즘을 평가한 청취 테스트의 결과에서 제안된 알고리즘을 적용하여 합성된 합성음의 음질 이 자동 분절로 생성된 단위를 그대로 이용한 경우의 음질보다 우수함을 보였다.

• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.239-245
• /
• 2000

The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.241-244
• /
• 1997

A speckle pattern from an optical fiber is used for a reference beam in writing and reading a volume hologram. The photorefractive volume hologram with this scheme shows good spatial selectivity for spatial(shift) multiplexing because the speckle pattern in writing and reading a hologram looses correlation with a small spatial shift. This scheme has the insensitivity to axial movement. The data storage system with this scheme will have a high storage density and a good stability in operation. We theoretically analyze the diffracted beam from a volume hologram recorded with the speckle pattern from the optical fiber. Experimental results are presented and compared with numerical analysis.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.447-452
• /
• 1995

In this paper a simple method of a position control for brushless DC motor is presented. For precise position control, a high performance torque controller is needed and a novel current control method is proposed. The current controller detects the uncommutating mode current for every 60.deg. (elec. angle) and controls it with PI controller. The current control loop includes the feedforward of back EMF and the feedforward of the neutral voltage between the neutral point of the inverter and the neutral point of the machine. In the position control, the acceleration pattern is calculated from the position reference. Then the speed trajectory is calculated from the acceleration pattern. The experimental results are presented to verify the proposed methods.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1558-1565
• /
• 2018

Three-phase current is reconstructed from the dc-link current in an AC machine drive with a single current sensor. Switching pattern modification methods, in which the magnitude of the effective voltage vector is secured over its minimum, are investigated to accurately reconstruct the three-phase current. However, the existing methods that modify the switching pattern cause voltage and current distortions that degrade sensorless performance. This paper proposes a variable-magnitude voltage signal injection method based on a high frequency voltage signal injection. The proposed method generates a voltage reference vector that ensures the minimum magnitude of the effective voltage vector by varying the magnitude of the injection signal. This method can realize high quality current reconstruction without switching pattern modification. The proposed method is verified by experiments in a 600W Interior permanent magnet synchronous machine (IPMSM) drive system.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.418-420
• /
• 1993

In this paper, we proposed a new FMS Landmark recognition algorithm using color images. Firstly, a NTSC image fame is captured, and then it is converted to a field image in order to reduce the image blurring from the AGV motion. Secondly, the landmark is detected via the comparison of the color vectors of image pixels with the landmark color. Finally, the identification of FMS landmark is executed using a newly designed landmark pattern with a set of reference points. The landmark pattern is normalized against its translation, rotation, and scaling. And then, its vertical projection data are fisted for the pattern classification using the standard data set. Experimental results show that our scheme performs well.

• Journal of Korea Foundry Society
• /
• v.12 no.4
• /
• pp.305-316
• /
• 1992

Steel and iron castings made with expandable polystylene (referred to hereafter as EPS) patterns are often affected by distinctive defects associated with incomplete decomposition of the EPS as the molds are filled with metal. The effects of practical factors on carbon pick-up were investigated on the specimens, by taking successive layers of swarf and analysis, whereas the lustrous carbon is determined by using combustion analysis. The quality of the castings, with particular reference to carbon pick-up in low carbon steel and lustrous carbon on gray iron, is further influenced to a significant extent by such practical factors as reduced pressure, the pouring temperature, the density of EPS pattern, the additive in coating and in pattern and the casting thickness. The rate at which carbon pick-up and lustrous carbon deposites are formed can be reduced by reducing the density of the pattern and also reducing pressure, especially by adding $Na_2CO_3$ in coating and in pattern to promote $CO_2$ evolution. The upper parts of castings obtained using EPS patterns are slightly higher in carbon pick-up and in lustrous carbon than other parts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.9
• /
• pp.1486-1492
• /
• 2016

This study presents the electrical load forecasting and error correction method using a real building load pattern, and the way to manage the energy storage system with forecasting results for economical load operation. To make a unique pattern of target load, we performed the Hierarchical clustering that is one of the data mining techniques, defined load pattern(group) and forecasted the demand load according to the clustering result of electrical load through the previous study. In this paper, we propose the new reference demand for improving a predictive accuracy of load demand forecasting. In addition we study an error correction method for response of load events in demand load forecasting, and verify the effects of proposed correction method through EMS scheduling simulation with load forecasting correction.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.143-158
• /
• 2013

Objectives The aim of this study is to contribute to developing questionnaire for pattern identification of chronic low back pain using delphi method. Methods The questionnaire which includes symptoms and signs of chronic low back pain is studied by delphi method. Seven experts of Korean medicine, especially of rehabilitation medicine participated in delphi examination. Delphi examination was carried out through evaluating and correcting the questionnaire by e-mail. Results By the Delphi method and score evaluation, 20 items of the initial copy of questionnaire are chosen for pattern identification of chronic low back pain. Conclusions By the delphic method among experts, a reference questionnaire for pattern identification of chronic low back pain was suggested. Further research is necessary for modification of questionnaire by statistics and certification by clinical trial research.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.403-409
• /
• 1997

We proposed a system that can perform pattern recognition based on parrallel optical feature extraction and performed experiments on this. The feature to be extracted are both 6 simple line orientations and two eigenvectors of the covariance matrix of the patterns that cannot be distinguished with the line orientation features alone. Our system consists of a feature-extraction part and a pattern-recognition part. The former that extracts the features in parallel with the multiplexed Vander Lugt filters was implemented optically, while the latter that performs the pattern recognition by the use of the extracted features was implemented in a computer. In the pattern recognition part, two methods are tested;one is to use an artificial neural network, which is trained to recognize the features directly, the other is to count the numbers of specific features simply and then to compare them with the stored reference feature numbers. We report the preliminary experimental results tested for 15 alpabet patterns with only straight line segments.