• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.61-68
• /
• 2020

In this study, the international standard ISO TS 16774 Part 3 Test Method for Water (wash out) Resistance and KS F 4935 ｢Sealant Injection type for water leakage maintenance of adhesive flexible rubber asphalt series｣, which are standardized as a quality control method of injection type repair materials used for water leakage cracks in underground concrete structures, are currently used in Korea. As a result, considering the performance criteria of "mass change rate -0.1%" stipulated in KS F 4935, the remaining 13 types repair materials, excluding RG-2 of synthetic rubber and UG-1 of urethane, need to be reviewed for stabilization of the loss resistance due to the flow of ground water. The results of this study are determined to be available as a basic indicator for the selection of repair materials used for cracks in concrete structures. In addition, it is expected that the results of this study can be utilized as reference data that can be reflected in the improvement of the quality of repair materials that will be researched and developed later.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.271-279
• /
• 2021

The purpose of this study was to investigate the effects of maximum and endurance resistance exercises on total work, blood viscosity, and erythrocyte volume ratio. The study subjects were selected as 15 men in their twenties with 12 months or more of resistance exercise experience, and the bench press 1RM was measured before the experiment, and the experiment for each condition was cross-allocated at intervals of one week, and the maximum repetition was performed in 6 sets. As a result, the total amount of exercise showed that the muscular endurance strength was higher than that of the maximum muscular strength (p<.001), and the blood viscosity and erythrocyte volume ratio were higher after exercise than before (p<.01) regardless of the total exercise amount. In summary, it was found that blood viscosity was not affected by exercise intensity and amount of exercise, and increased with one-time resistance exercise. This is clinically significant in constructing a resistance exercise program, and it is considered to be a reference material in creating an exercise program for clinical patients related to vascular disease.

• Journal of the Korean earth science society
• /
• v.42 no.1
• /
• pp.1-10
• /
• 2021

Silicon (Si) is the second most abundant element in the crust and consists of three stable isotopes, 28Si (92.23%), 29Si (4.67%), and 30Si (3.10%). Si isotopes are widely studied worldwide as a proxy for the biogeochemical cycle of Si to reconstruct the paleoenvironment and paleoclimate. However, in Korea, there have been no studies on biogenic silica using Si isotopes. In this study, we carried out Si isotope measurements of giant diatoms, summarizing the previously reported alkali fusion methods and establishing the best Si separation method for biogenic silica. Samples were completely digested using alkali fusion at high temperatures, effectively separating Si using an AG® 50W-X8 cation exchange resin. To evaluate the precision and accuracy of our measurements, Si isotope standard material (NBS-28) and USGS reference materials (AGV-2, GSP-2, BHVO-2) were analyzed. The results are in excellent agreement with the reported values within the acceptable error. The Si isotope measurement method developed in this study is expected to help in understanding the paleoclimate and paleoenvironment by tracing the Si cycle.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.202-210
• /
• 2022

Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.425-438
• /
• 2021

The purpose of this study is to analyze local cultural festivals hosted contact-free in the corona era and to suggest the direction for sustainable festivals in the post-corona era. To this end, by analyzing the cases of well-known festivals held contact-free in 2020 and 2021, we tried to get implications for the festivals in the post-corona era from there. As a result of this study, contact-free festivals had the following characteristics. First, the on-tact method, which produces and transmits a video or allows interaction through real-time participation, was prominent. Second, in order to compensate for the shortcomings of the contact-free method, various efforts have been made to enable on-tact experience by making and delivering experience kits in the case of experiential elements of the festival in advance. Third, communication was secured through real-time comments, and fourth, products were sold through the Internet and live commerce channels, and a certain effect was obtained. In particular, in the case of online festivals, there is a problem of loss of the sense of place of the festival, but there are cases of online festivals with more participation than offline festivals. It is judged that the problem of how to achieve this will become a reference material for the future development of contact-free festival contents.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.175-183
• /
• 2022

With the expansion of the automobile market, the demand for Nd as an essential rare earth material for automobile motors is rapidly increasing. Research on the calcio-thermic reduction process between Nd₂O₃ and calcium-based alloys has been extensively studied in order to manufacture Nd. In this study, Ca-Cu, as a reducing for Nd₂O₃, was prepared by electrolysis in CaCl₂ molten salt. Cu wire and graphite were employed as a working electrode and a counter electrode for electrolysis reaction, respectively. The reference electrode was manufactured by putting Ag wire in a mixture of AgCl and CaCl₂ at a ratio of 1:99 mol%. The cyclic voltammetry results showed that the deposition of Ca²⁺ on the surface of working electrode was observed from a potential of -1.8 V, and the reduction potential of Ca²⁺ decreased as the reaction temperature increased. The diffusion coefficient of Ca²⁺ calculated by the chronoamperometry experiment was found to be 5.4(±6.8)×10^-6 cm²/s. In addition, Ca-Cu liquid alloy was prepared by applying a constant potential to Cu electrodes. The element ratio of Ca-Cu alloy formed by applying a potential of -2.0 V was found to Ca:Cu=1:4.

• Composites Research
• /
• v.35 no.5
• /
• pp.303-308
• /
• 2022

PIC (Piecewise Integrated Composite) is a new concept for designing a composite structure with mosaically assigning various types of stacking sequences in order to improve mechanical properties of laminated composites. Also, machine learning is a sub-category of artificial intelligence, that refers to the process by which computers develop the ability to continuously learn from and make predictions based on data, then make adjustments without further programming. In the present study, the tapered box beam type PIC robot arm for carrying and transferring wide and thin LCD display was designed based on the machine learning in order to increase structural stiffness. Essential training data were collected from the reference elements, which were intentionally designated elements among finite element models, during preliminary FE analysis. Additionally, triaxiality values for each finite element were obtained for judging the dominant external loading type, such as tensile, compressive or shear. Training and evaluating machine learning model were conducted using the training data and loading types of elements were predicted in case the level accuracy was fulfilled. Three types of stacking sequences, which were to be known as robust toward specific loading types, were mosaically assigned to the PIC robot arm. Henceforth, the bending type FE analysis was carried out and its result claimed that the PIC robot arm showed increased stiffness compared to conventional uni-stacking sequence type composite robot arm.

• Education of Primary School Mathematics
• /
• v.25 no.4
• /
• pp.313-328
• /
• 2022

The purpose of this study is to understand the characteristics of the questions presented in shapes area and Measurement area of elementary mathematics textbooks. For this purpose, the types of questions presented in shapes area and measurement area of elementary mathematics textbooks and their working functions were comparatively analyzed by area and by grade cluster. As a result of the analysis, the number of questions per lesson increased sharply in the 3rd and 4th grade cluster compared to the 1st and 2nd grade cluster in both shapes area and measurement area. In these two areas, the most common reasoning questions are presented. It is presented relatively more in measurement area than in shapes area. There was a clear difference between the types of questions presented in shapes area and measurement area. In common with the two areas, questions mainly were acted as a function to help students learn to reason mathematically, a function to help students to determine whether something is mathematically correct, and a function to help students learn to conjecture, invent, and solve problem. The characteristics of the questions identified in this study can provide teaching/learning implications for the design and application of the questions suitable for the guidance of shapes area and measurement area, and can be used as a reference material when writing mathematics textbooks.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.2
• /
• pp.355-375
• /
• 2022

This study is to grasp LRM's feature and applications plan to reflect LRM to cataloging related standards and individual system through comparing and analyzing LRM with the FR model in terms of entities, attributes, and relationships. The application plan is suggested as follows. First, the entity can be extended by defining sub-entities of each entity in the standards and the individual system in order to reflect LRM, even though entities such as families, groups, identifiers, authorized access points, concepts, objects, events, agency and rules have been deleted in LRM. Second, the attribute should be subdivided in the standards and the individual system in order to apply LRM, though many attributes have been changed to relationships for linked data and decreased in LRM. In particular, more specific and detailed property names in the standards and the individual system should be clearly presented, and the vocabulary encoding scheme corresponding to each property should be also developed, since properties with similar functions or repetition in various entities, and material specific properties are generalized and integrated into comprehensive property names. Third, the relationship should be extended through newly declaring the refinement or subtype of the relationship and considering a multi-level relationship, since the relationship itself is general and abstract under increasing the number of relationships in comparing to the property. This study will be practically utilized in cataloging related standards and individual system for applying LRM.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.373-380
• /
• 2022

In this study, Chung's equations 1, 2, and 3 were extended to standardize smoke safety rating evaluation in case of fire, and Chung's equations-V, smoke performance index-V, and smoke growth index-V were calculated. Five types of wood were selected and their smoke indices were measured using the cone calorimeter method according to ISO 5660-1. The smoke risk was graded by the smoke risk index-VI according to Chung's equation-VI. Smoke risk index-VI increased in the order of PMMA (1) ≈ maple (1.01) < ash (1.57) < needle fir (4.98) < paulownia (46.15) < western red cedar (106.26). It was predicted that maple and ash had the lowest smoke risk, and paulownia and western red cedar had the highest. The five samples' CO mean production rate (COP_mean) was 0.0009~0.0024 g/s, indicating that these woods were incompletely burned than the polymethyl methacrylate (PMMA) reference material. Regarding the smoke properties of the chosen woods, the smoke performance index-V (SPI-V) increased as the bulk density increased, and the smoke risk index-VI (SRI-VI) decreased.