• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.141-152
• /
• 2020

The rapid on-site measurement of hydroponic nutrients allows for the more efficient use of crop fertilizers. This paper reports on the development of an embedded on-site system consisting of multiple ion-selective electrodes (ISEs) for the real-time measurement of the concentrations of macronutrients in hydroponic solutions. The system included a combination of PVC ISEs for the detection of NO₃, K, and Ca ions, a cobalt-electrode for the detection of H₂PO₄, a double-junction reference electrode, a solution container, and a sampling system consisting of pumps and valves. An Arduino Due board was used to collect data and to control the volume of the sample. Prior to the measurement of each sample, a two-point normalization method was employed to adjust the sensitivity followed by an offset to minimize potential drift that might occur during continuous measurement. The predictive capabilities of the NO₃ and K ISEs based on PVC membranes were satisfactory, producing results that were in close agreement with the results of standard analyzers (R² = 0.99). Though the Ca ISE fabricated with Ca ionophore II underestimated the Ca concentration by an average of 55%, the strong linear relationship (R² > 0.84) makes it possible for the embedded system to be used in hydroponic NO₃, K, and Ca sensing. The cobalt-rod-based phosphate electrodes exhibited a relatively high error of 24.7±9.26% in the phosphate concentration range of 45 to 155 mg/L compared to standard methods due to inconsistent signal readings between replicates, illustrating the need for further research on the signal conditioning of cobalt electrodes to improve their predictive ability in hydroponic P sensing.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.313-322
• /
• 2018

To investigate the changing patterns of sub-alpine forest vegetation due to climate change requires accumulation of contiguous reference data and continuous monitoring. Furthermore, it is crucial to monitor short-term ecological change of lower level vegetation to understand the trend of long-term vegetation change. Therefore, this study carried out a vegetation survey and tree diameter measurement in 36 plots of Mt. Jiri inhabited by Abies koreana species from 2015 to 2017 to examine the short-term dynamics of Abies koreana seedling and the change of vegetation distribution according to altitude. We analyzed the importance value and MIV (mean importance value) of major species by each stratum as well as the importance value and species diversity index of major species and the change of seedling population by altitude. The results showed that Abies koreana had the highest importance value on tree layer, Rhododendron schlippenbachii on shrub layer and Tripterygium regelii on herb layer. MIV was high in the order of Abies koreana, Rhododendron schlippenbachii and Acer pseudosieboldianum. Regarding the species composition and species diversity index (H') along the altitudinal gradient, Sasa borealis showed high MI and low H' in the elevation less than 1,500 m, and IV of Tripterygium regelii and H' of herb layer were high in the elevation of 1,700 - 1,800 m. Abies koreana seedling decreased by 22.4% from 1,250 n/ha in 2015 to 970 n/ha in 2017 (p <0.05) throughout the investigated area. The decline rate along seedling and sapling height were 22.9% in less than 10 cm, 3.4% in 10-30 cm, 8.9% in 30-50 cm, 39.3% in 50-100 cm, and 55.1% more than 100 cm. Few of A. koreana seedlings appeared due to the dominance of Sasa borealis in the elevation of 1,500 m or less and due to the dominance and high species diversity of Tripterygium regelii in the elevation of 1,700-1,800 m. On the other hand, many of A. koreana seedlings appeared in the elevation of 1,600-1,700 m due to no distribution of S. borealis and T. regelii species in that altitude range. Therefore, we concluded that those seedlings and saplings of A. koreana could be more stable in the altitude of 1,600-1,700 m.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.14 no.1
• /
• pp.12-25
• /
• 2003

Objectives：As increasing number of new antidepressants have been being introduced in clinical practice, pharmacological understanding has been broadened. These changes mandate new information and theories to be incorporated into the treatment process of children with depressive disorders. In light of newly coming knowledge, this review intended to recapitulate the characteristics of new antidepressants and to consider the pivotal issues to develope guidelines for the treatment of depression in childhood and adolescence. Methods：Searching the Pub-Med online database for the articles with the key words of 'new', 'antidepressants' and 'children' ninety-seven headings of review articles were obtained. The author selected the articles of pertinent subjects in terms of either treatment guideline or psychopharmacology of new antidepressants. When required, articles about the clinical effectiveness of individual antidepressants were separatedly searched. In addition, the safety information of new antidepressants was acquired by browsing the official sites of the United States Food and Drugs Administration and Department of Health and Human Services. Results：1) For the clinical course, treatment phase, and treatment outcome, the reviews or treatment guidelines adopted the information from adult treatment guidelines. 2) Systematic and critical reviews unambiguously concluded that selective serotonin reuptake inhibitors(SSRIs) excelled tricyclic antidepressants( TCAs) for both efficacy and side effect profiles, and were recommend for the first-line choice for the treatment of children with depressive disorders. 3) New antidepressants generally lacked treatment experiences and randomized controlled clinical trials. 4) SSRIs and other new antidepressants, when used together, might result in pharmacokinetic and/or pharmacodynamic drug-to-drug interaction. 5) The difference of the clinical effectiveness of antidepressants between children and adults should be addressed from developmental aspects, which required further evidence. Conclusion：Treatment guidelines for the pharmacological treatment of childhood and adolescence depression could be constructed on the basis of clinical trial findings and practical experiences. Treatment guidelines are to best serve as the frame of reference for a clinician to make reasonable decisions for a particular therapeutic situation. In order to fulfill this role, guidelines should be updated as soon as new research data become available.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.48-54
• /
• 2010

Purpose: The objective of this study was to evaluate and compare the accuracy of impression body taking by the closed and the open tray impression technique with 3 types of impression tray. Individual tray, metal stock tray and polycarbonate tray were used. Materials and methods: Nine closed tray impressions were taken by individual tray, metal stock tray and polycarbonate stock tray, respectively with polyether impression material. 9 open tray impressions were also acquired by same manner. Precision analysis on the master models was performed by attaching the reference frameworks with alternate single screws and measuring the vertical fit discrepancy of respective analogues in working cast with a stereo microscope. Data were analyzed by 1 way ANOVA and independent t-test. Results: The average fit accuracy of impression bodies was calculated. With the closed tray impression technique, there were significant statistical differences in vertical fit discrepancy according to the types of tray. The individual tray group showed the lowest value and the polycarbonate stock tray group represented the highest. With the open tray impression technique, there was no significant difference in vertical fit discrepancy. Significant statistical difference in vertical fit discrepancy was found between the open and the closed impression technique with the polycarbonate stock tray. Conclusion: From the results above, more precise impressions could be acquired by the rigid individual tray compared with the polycarbonate stock tray. It was hard to get consistent accuracy impressions by the closed tray impression technique with polycarbonate stock trays.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Journal of Life Science
• /
• v.17 no.6 s.86
• /
• pp.836-840
• /
• 2007

This study was conducted to investigate mineral contents of commercial powdered infant formula for obtaining basic data on infant nutrition. 11 Commercial infant formula based on cow's milk were collected and the contents of macro minerals (calcium, phosphorous, sodium, potassium and magnesium) and trace minerals (iron, zinc and copper) were compared with Dietary Reference Intakes for Koreans (KDRIs). The overall mineral contents in 100 g and in 100 kcal of infant formula satisfied the recommended formula regulation and Codex. In infant formula during 0-5 monthly age, calcium, phosphorous, sodium, potassium, magnesium, zinc and copper could supply 233.1%, 273.5%, 156.7%, 142.0%, 150.8%, 209.3%, 171.1% of recommended daily mineral intakes, respectively. The content of iron in 0-5 monthly age formula supplied2842.6% of recommended daily iron intakes. In infant formula during 6-11 monthly age, calcium, phosphorous, potassium, magnesium, iron, zinc and copper satisfied their recommended daily intakes. However, sodium only supplied 76.6% of its recommended daily intake. Intake ratio between Ca/P, Ca/Mg, Ca/Fe, Na/K and Zn/cu in infant formula during 0-5 monthly age were 1.7±0.2, 11.0±2.4,64.9±10.0, 0.3±0.1, and 9.6±1.0, respectively. Intake ratio between Ca/P, Ca/Mg, Ca/Fe, Na/K and Zn/cu in infant formula during 6-11 monthly age were 1.7${\pm}$0.2, 12.9${\pm}$1.5, 80.1${\pm}$13.8, 0.3, and 9.4${\pm}$1.1,respectively. From this study, evaluation of mineral contents of commercial infant formula was established, which could strengthen the basic information on infant nutrition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.822-829
• /
• 2013

Hypertension is one of the most common clinical diseases, with an increasing prevalence globally. Hypertension triggers various harmful consequences and affects multiple organs. Life-long care may be required in some cases. According to the Korea Center for Disease Control and Prevention, the prevalence of hypertension is gradually increasing. A 2011 survey revealed that 28.9% of Korean adults had hypertension. The prevalence rates were slightly higher among men than women. Accurate measurement of blood pressure(BP) is crucial to classify patients, to identify BP-related risks, and to inform correct treatment. For accurate blood pressure measurement, the use of a cuff bladder size appropriate for the mid-upper arm circumference(MUAC) is essential. Incorrect sized cuff bladder is one of the main causes of equipment error affecting sphygmomanometer accuracy. When commercial sphygmomanometers were examined, the cuff bladders differed from the dimensions specified in the ISO 81060-1:2007 standards. Undercuffing is responsible for a spurious overestimation of BP in patients with large arms leading to overdiagnosis of hypertension, whereas overcuffing (that is, use of relatively large cuffs with small arms), may be responsible for an opposite problem, leading to erroneous underestimation of BP levels. The cuff bladder sizes recommended by the American Heart Association(AHA) are an arm circumference(AC) of 17-25 cm for small-sized adults, AC of 24-32 cm for adults, AC of 32-42 cm for normal-sized adults, and AC of 42-50 cm for obese adults. In contrast, the AC of Korean adults ranges from 23-31 cm, belonging to a single type of adult bladder. Three types of bladders are necessary for Korean adults with an AC of 23-31cm. Hospitals often use one or two differently-sized Western cuffs for adult patients, which can yield inaccurate BP determinations. Cuff bladders with dimensions based on anthropometric reference data obtained from Koreans will aid hospitals to measure BP more accurately.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.273-280
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of international logistics strategies as a countermeasure in changes of international logistics environments. This region represents most severe competition among Mega hub ports in the world in terms of container cargo throughput at the onset of the 21 st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN. which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even compared with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjugn Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none have comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines. Moreover, through the comparative evaluation between major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korea ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently qualified in ASEAN.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.16-25
• /
• 2018

Initially from the Taoist scriptures, 'Dongcheon' is a term that can be regarded as a symbolic place in the real world for the enlightened ones who received relief and peace by restoring the human nature taught in the Confucian school. The long for an ideal world apart from the reality embodied as the labeling some places 'Dongcheon,' and the term was used to refer to a scenery where the ideal fairyland is reproduced. Besides, 'Dongcheon' was a term often used by Confucian scholars for various purposes including the attachment to the nearby landscapes, expressing homogeneity and superiority through placeness and the beautification of settlement spaces. This paper is the result of a field study on 'Dongcheon' in the Gyeongsang-Do. The research was conducted from March to August 2018, and we carried out firsthand location surveys on Dongcheons, of which some were lost, others were fairly preserved, and still others could not be located as only their existences were passed down orally. According to the field survey, there were total 111 inscriptions or engravings on the plates in Gyeongsang-Do that include the term 'Dongcheon.' There were 79 'Dongcheon' inscriptions confirmed in the Gyeongsangbuk-Do region: twenty in Yeongju-City, sixteen in Bonghwa-Gun, eleven in Andong-City and seven in Yeongyang-Gun and Ulgin-Gun. Among them, two were in the form of a wooden sign, and six were erected as rock signposts. Fourteen stops reported in the literature were lost or unidentified. Also, among the sixteen signs in Bonghwa-Gun, nine were cursive engravings. Meanwhile, there were 26 Dongcheon inscriptions in the Gyeongsangnam-Do region. Hamyang-Gun and Sancheong-Gun anf Hadong-Gun each housed three inscriptions, and seven places were in the form of rock signposts. 'Hwagaedongcheon' and 'Geumsandongcheon' could not be identified in inscriptions although they appear in Jibong Yuseol and Taengniji with stories of Choi Chiwon. The significance of this study is as a reference for future researches in traditional scenery, epigraphs, or as primary data that helps cultural exploration in the region.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.313-319
• /
• 2014

Investigations for hematologic values and the differential count of WBC for Korean indigenous cattle (KIC) and Stripped Cattle (SC) are rarely performed. Therefore, when the index of complete blood counts (CBC) analysis of KIC and SC were requested, it had many difficulties to make the results for blood condition since the standard hematologic values of KIC and SC are lacking. The objective of this study was to investigated the hematologic values and the differential count of WBC for blood of total 19 striped cattle (SC) and 187 KIC as a control by estimation analysis of hematologic characteristics. As a result, the mean values of RBC and platelet of KIC were significantly decreased by age (P<0.05). The mean values of RBC, HCT, MCV and MCHC between KIC and SC of the same age (2~3 years) showed the statistical significance (P<0.05). Also, in the WBC of KIC, the mean values were decreased according to the age from $13.8{\times}10^3/{\mu}l$ under 1 year to $9.5{\times}10^3/{\mu}l$ over 5 years. In the differential count of WBC of KIC, it showed generally the rates of 46.2% lymphocyte and 36% segmented neutrophil. Additionally, in comparative analysis between pregnant and non-pregnant group of KIC, the mean values of Hg and HCT in pregnant group were significantly decreased(P<0.05). In conclusion, data obtained from this study may be valuable as a standard for interpretation of the results in hematologic analysis of KIC. Result of this study will be used for establishing reference range for hematologic analysis in SC.