• The Journal of Korea Robotics Society
• /
• v.12 no.2
• /
• pp.194-205
• /
• 2017

A redundantly actuated planar 3-degree-of-freedom parallel mechanism is analyzed to show its high application potential as a haptic device. Its structure along with the closed form forward position solutions is briefly discussed. Then its geometric and kinematic characteristics via singularity analysis, the kinematic isotropy index, and the input-output force transmission ratio are investigated both for the redundantly actuated cases and for the non-redundantly actuated case. In addition, comparative joint torque simulations of the mechanism with different number of redundant actuations as well as without redundant actuation are conducted to confirm the improved joint torque distribution characteristics. Through these analyses it is shown that the geometric and kinematic characteristics of the redundantly actuated mechanism are superior to the ones of the mechanism without redundant actuation. Thus, it can be concluded that the suggested planar mechanism with redundant actuation has a very high potential for haptic device applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.48-51
• /
• 1996

A 5-bar structure with redundant actuators is proposed as a finger mechanism. It is shown that one additional redundant actuator greatly enhances the load handling capacity of the system. The actuator location should be carefully decided to maximize the performance enhancement. Furthermore, we develop stiffness and frequency control algorithms based on the internal loading created by redundant actuation. The effectiveness of these algorithms have been demonstrated by simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.971-977
• /
• 2012

Redundant actuated parallel kinematic machines (PKMs) have been widely researched to increase stiffness of PKMs. This paper presents theoretical analyses on the stiffness of non-redundant and redundant actuated PKM. Stiffness of each mechanism is defined by summation of actuator and structural stiffness; the actuator stiffness is determined from displacements of actuators, and the structural stiffness is determined from deformations of links by external forces. Calculated actuator and structural stiffness of non-redundant PKM show same distribution in entire workspace. On the contrary, the actuator and the structural stiffness of a redundant PKM has very different distribution in the workspace; so, we conclude the structural stiffness of redundant PKM should be considered to design the redundant PKM. The results can be used to design and analyze non-redundant and redundant PKMs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1613-1616
• /
• 1997

In order to develop a human hand mechanism, a 5-bar finger with redundant actuation is designed and implemented. an optimal set of acutator locations and link lengths for the case of one redundant actuator is obtained by employing a composite design index which simulataneously consider several performance indices such as workspace, isotropic index, and force transmission ratio. Each joing is driven by an compact actuator mechanism having ultrasonic motor and a gear set with poeneiometer an controlled by VME Bus-based control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.793-798
• /
• 1996

In this paper, output compliance effects at RCC point by both redundant joint compliances and antagonistic torques generated by internal preloading between joints of a spherical 3 degree-of-freedom mechanism are investigated. For this purpose, kinematic analysis is briefly described. Then, output compliance models at RCC point, which is generated by redundant joint compliances and by internal preloading between joints are derived. Finally, ranges of output compliance modulation due to these redundant joint compliances and antagonistic torques are examined through simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.355-360
• /
• 2002

To calibrate a non-redundantly actuated parallel mechanism, one can find actual kinematic parameters by means of geometrical constraint of the mechanism's kinematic structure and measurement values. However, the calibration algorithm for a non-redundant case does not apply fur a redundantly actuated parallel mechanism, because the angle error of the actuating joint varies with position and the geometrical constraint fails to be consistent. Such change of joint angle error comes from constraint torque variation with each kinematic pose (meaning position and orientation). To calibrate a redundant parallel mechanism, one therefore has to consider constraint torque equilibrium and the relationship of constraint torque to torsional deflection, in addition to geometric constraint. In this paper, we develop the calibration algorithm fir a redundantly actuated parallel mechanism using these three relationships, and formulate cost functions for an optimization algorithm. As a case study, we executed the calibration of a 2-DOF parallel mechanism using the developed algorithm. Coordinate values of tool plate were measured using a laser ball bar and the actual kinematic parameters were identified with a new cost function of the optimization algorithm. Experimental results showed that the accuracy of the tool plate improved by 82% after kinematic calibration in a redundant actuation case.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.356-368
• /
• 2003

This paper analyzes the characteristics of packet losses in mobile computing environments based on the Gilbert model and then describes a mechanism that can recover the lost audio packets using redundant data. Using information periodically reported by a receiver, the sender dynamically adjusts the amount and offset values of redundant data with the constraint of minimizing the bandwidth consumption of wireless links. Since mobile computing environments can be often characterized by frequent and consecutive packet losses, loss recovery mechanism need to deal efficiently with both random and consecutive packet losses. To achieve this, the suggested mechanism uses relatively large, discontinuous exponential offset values. That gives the same effect as using both the sequential and interleaving redundant information. To verify the effectiveness of the mechanism, we extended and implemented RTP/RTCP and applications. The experimental results show that our mechanism, with an exponential offset, achieves a remarkably low complete packet loss rate and adapts dynamically to the fluctuation of the packet loss pattern in mobile computing environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.531-534
• /
• 1996

In this work, we investigate the characteristics of output compliance matrix of a planar 3 degree-of-freedom parallel mechanism when joint compliances are attached to the mechanism redundantly. It is shown by simulation that by attaching redundant joint compliances symmetrically to the mechanism, the translational and rotational compliances can be arbitrarily modulated within some ranges. This property could be effectively used in the control of the compliance characteristics of actively adjustable RCC devices.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.320-327
• /
• 2005

A new mechanism for hyper redundant manipulator (HRM) is presented, which comprises of serially assembled compound three-bar linkages (CTL). The CTL mechanism has some unique properties. This paper presents the forward and inverse kinematics of this mechanism and shows the simulation of the HRM havig 9 CTL units. The recursive algorithm of the inverse kinematics that the author originally developed is employed. It is fast and stable ; moreover, it enables us to obtain a solution in which the end-point of the HRM is controlled by a portion of joints. It also presents the method of the dynamical analysis. There exist kinematical constraints in the proposed closed linkage mechanism. In the dynamic analysis constraints are sufficiently sustained by the constraint stabilization method that the author developed. The mechanical structure of the HRM having some CTL units that is under construction is shown.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.846-855
• /
• 1994

An effective stiffness, analogous to that of a wound spring, can be created by antagonistic redundant actuation of general closed-chain mechanisms. The qualitative and quantitative characteristics of the effective stiffness are investigated through a Four-bar mechanism, and a load distribution method is introduced which simultaneously guarantees the required system motion and the effective stiffness of the Four-bar mechanism. Furthermore, a simulation is performed to understand the inter-relationship among the effective stiffness, the Four-bar geometry, and the actuation effort. Based on this analysis, the Four-bar synthesis problem for effective stiffness generation is discussed.