Browse > Article
http://dx.doi.org/10.7746/jkros.2017.12.2.194

Analysis of the Redundant Actuation Characteristics of the Planar 3-DOF Parallel Mechanism  

Jeon, Jung In (Electro-Mechanical System Engineering, Korea University at Sejong)
Oh, Hyun Suk (Electro-Mechanical System Engineering, Korea University at Sejong)
Woo, Sang Hun (Electro-Mechanical System Engineering, Korea University at Sejong)
Kim, Sung Mok (Electro-Mechanical System Engineering, Korea University at Sejong)
Kim, Min Gun (Advanced Mechanical Engineering, Kangwon National University)
Kim, Whee Kuk (Electro-Mechanical System Engineering, Korea University at Sejong)
Publication Information
The Journal of Korea Robotics Society / v.12, no.2, 2017 , pp. 194-205 More about this Journal
Abstract
A redundantly actuated planar 3-degree-of-freedom parallel mechanism is analyzed to show its high application potential as a haptic device. Its structure along with the closed form forward position solutions is briefly discussed. Then its geometric and kinematic characteristics via singularity analysis, the kinematic isotropy index, and the input-output force transmission ratio are investigated both for the redundantly actuated cases and for the non-redundantly actuated case. In addition, comparative joint torque simulations of the mechanism with different number of redundant actuations as well as without redundant actuation are conducted to confirm the improved joint torque distribution characteristics. Through these analyses it is shown that the geometric and kinematic characteristics of the redundantly actuated mechanism are superior to the ones of the mechanism without redundant actuation. Thus, it can be concluded that the suggested planar mechanism with redundant actuation has a very high potential for haptic device applications.
Keywords
Redundant Actuation; Parallel Mechanism; Singularity Analysis; Kinematic Characteristics; Haptic device;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 J. Hollerback, "Redundancy resolution of manipulators through torque optimization," IEEE Trans. Rob. Autom., vol. 3, no. 4, pp. 308-316, 1987.   DOI
2 Y. Nakamura, H. Hanafusa, and T. Yoshikawa, "Taskpriority based redundancy control of robot manipulators," Int J. Rob. Res., vol. 6, no. 2, pp. 3-15, 1987.   DOI
3 S. Kock, W. Schumacher, "A parallel x-y manipulator with actuation redundancy for high-speed and activestiffness applications," IEEE Trans. Int. Conf. Robot. Auto., May 1998, pp. 2295-2300.
4 T. J. Kim, , B-J. Yi, and I.H. Suh, "Load distribution algorithms and experimentation for a redundantly actuated, singularity-free 3-DOF parallel haptic device," In Proceedings of the IEEE int'l conference on intelligent robotics and systems, 2004, pp. 2899-2904.
5 J. A. Saglia, J. S. Dai, and D. G. Caldwell, "Geometry and Kinematic Analysis of a Redundantly Actuated Parallel Mechanism That Eliminates Singularities and Improves Dexterity," ASME Journal of Mechanical Design, vol. 130, no. 12, pp. 124501_1-5, 2008.
6 S. H. Woo, S. M. Kim, M. G. Kim, B.-J. Yi, and W.K. Kim, "Torque Balancing Algorithm for the Redundantly Actuated Parallel Mechanism," Mechatronics, vol. 42, pp. 41-51, 2017.   DOI
7 L. W. Tsai, Robot Analysis: The Mechanics of Serial and Parallel Manipulators, Wiley-Interscience, 1999.
8 G. Lee, S. Park, D. Lee, F. C. Park, J. I. Jeong, and J. Kim, "Minimizing energy consumption of parallel mechanism via redundant actuation," IEEE/ASME Trans. Mechatron., vol. 20, no. 6, pp. 2805-2812, 2015.   DOI
9 J. P. Merlet, Parallel Robots, Kluwer Academic Publishers, 2000.
10 F. Hao and J. M. McCarthy, "Conditions for line-based singularities in spatial platform manipulators," J. of Robotic Sys., vol. 15, no. 1, pp. 43-55. 1988.   DOI
11 N. L. White, "Grassmann-Cayley algebra and robotics," Journal of Intelligent Robot Systems, vol. 11, pp. 91-107, 1994.   DOI
12 P. Ben-Horin and M. Shoham, "Application of Grassmann- Cayley algebra to geometrical interpretation of parallel robot singularities," International Journal of Robotics Research, vol. 28, no. 1, pp. 127-141, 2009.   DOI
13 K. Shin, B.-J. Yi, and W. Kim, "Parallel singularity-free design with actuation redundancy: A case study of three different types of 3-degree-of-freedom parallel mechanisms with redundant actuation," Proceedings of the Institution of Mechanical Engineers, Part C: J Mechanical Engineering Science, vol. 228, no. 11, pp. 2018-2035, 2014.
14 B.-J. Yi, S.M. Kim, H.K. Kwak, and W.K. Kim. "Multi-task oriented design of an asymmetric 3T1R type 4-DOF parallel mechanism," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 227, no. 10, pp. 2236-2255, 2013.
15 S. M. Kim, B.-J. Yi, and W. K. Kim, "Forward kinematic singularity avoiding design of a schönflies motion generator by asymmetric attachment of subchains," International Journal of Control, Automation, and Systems, vol. 11, no. 1, pp. 116-127, 2013.   DOI
16 J. H. Park, S. M. Kim, and W. K. Kim, "Analysis on Kinematic Characteristics of the Revolute joint-based Translational 3-DOF Parallel Mechanisms," Journal of Korea Robotics Society, vol. 10, no. 2, pp. 119-132, 2015.   DOI
17 S. M. Kim, K. S. Shin, B.-J. Yi, and W. K. Kim. "Development of a novel two-limbed parallel mechanism having schönflies motion," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 229, no. 1, pp. 136-154, 2015.
18 H.S. Oh, B.-J. Yi, and W.K. Kim, "Kinematic Characteristic Analysis of a Planar 3-DOF Parallel Mechanism Having Closed-form Position Solution," The 8 th Korea Robotics Society Conference, 2013, pp. 390-391.
19 J.H. Lee, B.-J. Yi, S.R. Oh, et al., "Optimal design and development of a five-bar finger with redundant actuation," Mechatronics, vol. 11, pp. 27-42, 2001.   DOI
20 H.S. Oh, "Kinematic Characteristic Analysis of a Planar 3-DOF Parallel Mechanism Having Closed-form Position Solution," Master's thesis, Korea university, June, 2013.
21 S.H. Kim and J.H. Park, "Singularity Avoidance Algorithms for Controlling Robot Manipulator: A Comparative Study," Journal of Korea Robotics Society, vol. 12, no. 1, pp. 42-54, 2017.   DOI
22 L.W. Tsai, G. C. Walsh, and R. E. Stamper, "Kinematics of a novel three DOF translational platform," Proceedings of the IEEE Int. Conf. Robot. Auto., 1996, pp. 3446-3451.
23 J. Wua, J. Wanga, Z. You, "A comparison study on the dynamics of planar 3-DOF, 4-RRR, 3-RRR and 2-RRR parallel manipulators," Robotics and Computer-Integrated Manufacturing, vol. 27, pp. 150-156, 2011.
24 V. Arakelian, S. Briot, S. Yatsun, and A. Yatsun, "A new 3-DoF planar parallel manipulator with unlimited rotation capability," 13 th World Congress in Mechanism and Machine Science, June, 2011, IMD-123.
25 Y. Fu, Y. Yang, B. Pan, and S. Wang, "Dynamic modeling and analysis of a 3-DOF parallel haptic device," Proceedings of 2013 IEEE Conf. on Mechatronics and Automation, Japan, 2013, pp. 110-115.
26 J.I., Jeon, H.S. Oh, J.H. Park, and W.K. Kim. "Implementation of the redundantly actuation planar parallel mechanism having closed-form forward position solution," Proceedings of the KSPE Conf., Fall, 2013, pp. 313-314.
27 J.I. Jeon, "Redundant Actuation Characteristics Analysis and Practical Redundancy Algorithm of a Planar 3-DOF Parallel Mechanism Having Closed-form Position Solution," Master's thesis, Korea university, Dec., 2014.