• Information and Communications Magazine
• /
• v.32 no.10
• /
• pp.31-40
• /
• 2015

This paper investigates several existing techniques to reduce high-availability seamless redundancy (HSR) traffic. HSR is a redundancy protocol for Ethernet networks that provides duplicated frames for separate physical paths with zero recovery time. This feature makes it very useful for real-time and mission-critical applications, such as military applications and substation automation systems. However, the major drawback of HSR is that it generates too much unnecessary redundant traffic in HSR networks. This drawback degrades network performance and may cause congestion and delay. Several HSR traffic reduction techniques have been proposed to reduce the redundant traffic in HSR networks, resulting in the improvement of network performance. In this paper, we provide an overview of these HSR traffic reduction techniques in the literature. The operational principles, advantages, and disadvantages of these techniques are investigated and summarized. We also provide a traffic performance comparison of these HSR traffic reduction techniques.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.3
• /
• pp.55-61
• /
• 2011

This paper presents an implementation of Lattice Reduction (LR)-aided detector for Multiple-Input Multiple-Output (MIMO) system using Graphics Processing Unit (GPU). GPU is a parallel processor which has a number of Arithmetic Logic Units (ALUs), thus, it can minimize the operation time of LR algorithm through the parallelization using multiple threads in the GPU. Through the implemented LR-aided detector, we verify that the LR-aided detector operates a lot faster than Maximum Likelihood (ML) detector. The implemented LR-aided detector has been applied to WiMAX system to show the feasibility of its real-time processing. In addition, we demonstrate that the processing time can be reduced at the cost of 3dB SNR loss by limiting the repeating loop in Lenstra-Lenstra-Lovasz (LLL) algorithm which is frequently used in LR-aided detector.

• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.509-516
• /
• 2001

This paper introduced some advantages of the time-frequency analysis of vibration and investigated, using the time-frequency transform, the characteristics of the transient motion of a tractor seat, which occurred during the tractor traversed over a rectangular obstacle on the flat surface. The characteristics of the short-time courier and wavelet transforms as time-frequency analysis methods were introduced and discussed to figure out which is more suitable to the analysis of the transient motions of agricultural tractors. Using each transform, transient vibration of a tractor seat was analyzed. Results of the analysis showed that the transient vibration of the seat was influenced by the natural frequencies of vertical mode of chassis, pitching mode of engine and pitching mode of cab of the tractor. The time sequence of the natural mode of tractor vibration was also revealed by the time-frequency analysis. The vibration path analysis by the time-frequency transform showed that the vibration energies transmitted from the front mounts to the seat were less than those from the rear mounts. The energy reduction ratios between the cab mounts and seat were also estimated to be about 72∼78%. The front mounts showed larger reduction than the rear mounts. However, the reduction difference between the right and left sides mounts was negligibly small. The short time Fourier transform was found to be a proper method for investigating the transient motions of farm machines and their effects on the ride vibration.

• Clinics in Shoulder and Elbow
• /
• v.9 no.1
• /
• pp.96-104
• /
• 2006

Purpose: To evaluate and compare the results of children with displaced supracondylar fractures of humerus treated with open reduction and pinning with closed reduction and pinning. Materials and Methods: From March 2002, we treated 17 patients with completely displaced supracondylar fractures under the age of 7 with a minimal follow up period of 6 months. 9 patients were treated with closed reduction and pinning and 8 patients were treated with open reduction and pinning. The clinical results were evaluated with Flynn's criteria. Time to bone union was also analyzed for these two set of patients. Results: The group treated with open reduction had 6 excellent and 2 good results for change in carrying angles, 5 excellent, 2 good and 1 fair results for motion loss evaluated by Flynn's criteria. The average time to bony union for this group was 5.8 weeks. The group treated with closed reduction had 6 excellent, 2 good, and 1 fair results for change in carrying angles and 7 excellent, 1 good and 1 fair results for motion loss. The average time to bony uinon for this group was 3.7 weeks. Conclusion: In treating completely displaced supracondylar fractures of humerus in children, the closed reduction method and open reduction method all showed good results. But the operation time, duration of hospital stay and time to union was somewhat shorter for the patients treated with closed redution and pinning.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.385-389
• /
• 2003

There are four main components of the CMP process: polishing pad, slurry, elastic supporter, and pad conditioner. The polishing pad is an essential component to the reproducibility of polishing uniformity in CMP process. However, the polishing pad in recently using metal CMP raised the several points of high cost caused by the increase of cycle time and the many usage of slurry. It is necessary to develop the novel polishing pad which would lead the cost reduction by the higher pad life-cycle, minimized cycle time and lower slurry usage. The characteristics of polishing pad were studied on the effects of different sets of the Polishing pad, which can be applied to metal chemical mechanical polishing process for global planarization of multilevel interconnection structure. The main purpose of this experiment is cost reduction by the increase of pad life-time, the decrease of cycle time and the lower usage of slurry through the specific hard porous structured pad design. It is confirmed that the novel polishing pad made the slurry usage decrease to 60% as well as the pad life-time increase twice with the 25% improvement of removal rate. The polishing time could be decreased and it also helped the cycle time to diminish. It can be expected that this results will help both the process throughput and the device yield to be improved.

• Journal of the Korean Society of Visualization
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2011

An experimental assessment has been made of the drag reducing efficiency of the outer-layer vertical blades, which were first devised by Hutchins. The drag reduction efficiency of the blades was reported to reach as much as 30%. However, the drag reduction efficiency was quantified only in terms of the reduction in the local skin-friction coefficient. In the present study, a series of drag force measurements in towing tank has been performed toward the assessments of the total drag reduction efficiency of the outer-layer vertical blades. A maximum 9.6% of reduction of total drag was achieved. The scale of blade geometry is found to be weakly correlated with outer variable of boundary layer. In addition, detailed flow field measurements have been performed using 2-D time resolved PIV with a view to enabling the identification of drag reduction mechanism.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.41-49
• /
• 2002

Recently, pilot studies showed an evidence of reduction of airborne hexavalent chromium, Cr(VI), on PVC filter during air sampling and storage. However, the information on this in the field was limited. Thus, we studied the reduction behaviors of airborne Cr(VI) on PVC filters during sampling and storage at three field electroplating operations. Regression between sampling time and the reduction (ratio of Cr(VI) to total Cr concentrations) was not statistically significant (p>0.05). However, the reductions in samples collected for 240 ～ 340 minutes were significantly higher than those for 30 - 60 minutes. On the other hand, another experiment showed a good correlation (r=0.96) between sampling time and the reduction without an exceptional value. Storage temperature was not a factor affecting the reduction of Cr(VI) collected on PVC filter. The loss of Cr(VI) samples stored in alkali solution (2% NaOH/3% Na$_2$CO$_3$) was significantly lower than that stored in vial according to NIOSH method (p<0.05). Thus, dipping Cr(VI) samples into alkali solution was a storage method to minimize tile reduction.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2321-2326
• /
• 2018

We evaluated the optimal conditions for fluidization of nickel oxide (NiO) and its reduction into high-purity Ni during hydrogen reduction in a laboratory-scale fluidized bed reactor. A comparative study was performed through structural shape analysis using scanning electron microscopy (SEM); variance in pressure drop, minimum fluidization velocity, terminal velocity, reduction rate, and mass loss were assessed at temperatures ranging from 400 to $600^{\circ}C$ and at 20, 40, and 60 min in reaction time. We estimated the sample weight with most active fluidization to be 200 g based on the bed diameter of the fluidized bed reactor and height of the stocked material. The optimal conditions for NiO hydrogen reduction were found to be height of sample H to the internal fluidized bed reactor diameter D was H/D=1, reaction temperature of $550^{\circ}C$, reaction time of 60 min, superficial gas velocity of 0.011 m/s, and pressure drop of 77 Pa during fluidization. We determined the best operating conditions for the NiO hydrogen reduction process based on these findings.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.516-522
• /
• 2004

In this paper we investigate the properties of a generalized impulse response Gramian. The recursive relationship satisfied by the family of Gramians is established. It is shown that the generalized impulse response Gramian contains information on the characteristic polynomial of a linear time-invariant continuous system. The results are applied to model reduction problem.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.215-218
• /
• 2001

To improve the performance of PID controller of high order systems by model reduction, we proposed a new model reduction method in frequency domain. A new model reduction method we proposed, considered four points (${\angle}G(jw)=0$, $-{\pi}/2$, $-{\pi}$, $-3{\pi}/2$) in stead of two points (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve. And for high order systems that it have not two point (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve, we proposed a method to annex very small dead time. This method has a annexed very small dead time on the base model for reduction, and we cancel it after to get the reduced model. It is shown that the performance of proposed method is better than any other methods.