• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.275-281
• /
• 2023

In recent years, technological developments have rapidly increased the number of complex structures and equipment in the industrial. Accordingly, the prognostics and health monitoring (PHM) technology has become significant. The safety assessment of industrial sites requires data obtained by installing a number of sensors in the structure. Therefore, digital twin technology, which forms the core of the Fourth Industrial Revolution, is attracting attention in the safety field. The research on digital twin technology of structures subjected to seismic loads has been conducted recently. Hence, this study proposes a digital twin system that estimates the responses and arbitrary load in real time by utilizing the minimum sensor to a pipe that receives a seismic and arbitrary load. To construct the digital twin system, a finite-element model was created considering the dynamic characteristics of the pipe system, and then updating the finite-element model. In addition, the calculation speed was improved using a finite-element model that applied the reduced-order modeling (ROM) technology to achieve real-time performance. The constructed digital twin system successfully and rapidly estimated the load and the point where the sensor was not attached. The accuracy of the constructed digital twin system was verified by comparing the response of the digital twin model with that derived by using the load estimated from the digital twin model as input in the finite-element model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.339-344
• /
• 2011

In the past much effort has been made to utilize advanced computational fluid dynamic (CFD) programs for aeroelastic simulations and analysis. However, it is limited in the field of unsteady aeroelasticity due to enormous size of computer memory and unreasonably long CPU time. Recently, AAEMS(Aerodynamics is Aeroelasticity minus Structure) was developed for linear time-invariant, coupled fluid-structure systems. In this paper, to demonstrate further the efficiency and accuracy of the new model reduction method, we successfully examine AGARD 445.6 wing modeled by FLUENT CFD, FSIPRO3D and NASTRAN FEM(Finite Element Method) programs. Using the ROM(Reduced Order Modeling) one can predict flutter boundary as a function of the dynamic pressure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.151-154
• /
• 2009

본 연구에서는 Proper Orthogonal Decomposition (POD)를 이용하여 공력축소모델을 구축하였다. 일반적으로 Euler equations과 같은 높은 정확도를 가지는 공력해석을 수행할 경우 많은 계산 비용이 발생하게 된다. 특히 공탄성 해석과 같이 수차례의 공력해석이 필요한 경우 그 비용은 더 증가하게 된다. 이러한 문제를 줄이기 위해서 축소모델(Reduced Order Model; ROM)의 개발은 반드시 필요하다. 공력축소모델을 구하는 방법 중 하나인 POD는 snapshot 데이터로부터 기저벡터를 구하고, 이들의 선형결합을 통하여 축소된 공간에서 해를 찾는 방법이다. 본 연구에서는 POD 기저벡터를 이용한 공력축소모델을 구축하고, 이를 전투기 날개문제에 적용하여 구하여진 정상상태 해와 Euler 해석 결과를 비교해 보았다. 또한 진동하는 익형문제에 적용하여 봄으로써 공탄성 해석에 적용 가능성 여부를 확인하였다.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.44-49
• /
• 2015

A gust response analyses method based on Reduced Order Models (ROMs) was developed in the paper. Firstly, taken random signal as the input signal and adopt Single Input-Multi-Output (SIMO) training fashion, a ROM based on Auto-Regressive and Moving Average model (ARMA) was established and validated with the comparison of CFD/CSD and experiment. Then, by introducing control surface deflection and control laws, flutter active suppress was studied. Lastly, through filtering and transferring function, the gust temporal signal is obtained based on Dryden gust model, and gust response and suppress were simulated.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.651-661
• /
• 2017

A truss-braced wing (TBW) aircraft has recently received increasing attention due to higher aerodynamic efficiency compared to conventional cantilever wing aircraft. For conceptual TBW aircraft design, we developed a propulsion-and-airframe integrated design environment by replacing a semi-empirical turbofan engine model with a thermodynamic cycle-based one built upon the numerical propulsion system simulation (NPSS). The constructed NPSS model benefitted TBW aircraft design study, as it could handle engine installation effects influencing engine fuel efficiency. The NPSS model also contributed to broadening TBW aircraft design space, for it provided turbofan engine design variables involving a technology factor reflecting progress in propulsion technology. To effectively consolidate the NPSS propulsion model with the TBW airframe model, we devised a rapid, approximate substitute of the NPSS model by reduced-order modeling (ROM) to resolve difficulties in model integration. In addition, we formed an artificial neural network (ANN) that associates engine component attributes evaluated by object-oriented weight analysis of turbine engine (WATE++) with engine design variables to determine engine weight and size, both of which bring together the propulsion and airframe system models. Through propulsion-andairframe design space exploration, we optimized TBW aircraft design for fuel saving and revealed that a simple engine model neglecting engine installation effects may overestimate TBW aircraft performance.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.43-46
• /
• 2015

Aeroelastic gust response analysis plays an important role in design of aircrafts. For gust response analysis, frequency domain aerodynamics method has been typically used with generalized aerodynamic influence coefficient matrices at various reduced frequencies. However, it cannot be applied to the aeroservoelastic analysis, such as gust alleviation control. Time-domain state space (SS) models must be built. It attacks little attention that gust response analysis relies on continuous gust time-domain input signal in terms of its PSD function. The aim the current study is to provide a reduced-order modeling (ROM) method based on CFD to model gust responses for continuous gust responses for continuou gust inputs in time domain. The paper analyzed the gust response of AGARD445.6 wing subjected to the Dryden gust with ROMs and compared the difference between the rigid structure and elastic one. The results demonstrate that structure elastic effect effect should be considered in the design of aircraft.

• 한국산업정보학회논문지
• /
• 제29권3호
• /
• pp.41-49
• /
• 2024

본 논문에서 중전압 직류 시스템(MVDC)의 적용을 위한 초전도 한류기(SFCL)의 설계 최적화를 위한 시뮬레이션 결과를 검증한다. 신재생 에너지의 증가와 계통 연계의 관점에 있어서, 기존의 송전망이나 배전망이 아닌 신재생 에너지망의 에너지 밸런싱을 위한 중전압 시스템이 연구 개발 실증 중에 있다. 특히 DC 배전망의 고장 전류는 빠른 시간 내에 큰 고장 전류를 차단해야 하기 때문에 초전도 한류기와 같은 전류 제한 시스템은 직류 차단기의 동작에 많은 이점이 있다. 이러한 초전도 한류기의 개발에 있어 시제작 및 평가 전에 유한 요소 해석(FEM)과 장시간의 설계 과정을 거쳐야 한다. 이러한 설계과정에서의 시간을 줄이기 위해 차원축소모델(ROM)을 활용하여 설계 결과를 학습하고 유한요소 해석 설계 결과와 동일한 결과를 검증함으로 기존 공학 모델의 제작 및 양산 등의 설계 시뮬레이션을 최적화하는 것 적용할 수 있다.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.411-428
• /
• 2022

This paper presents the Campbell diagram analysis of the rotordynamic system using the full order model (FOM) and the reduced order model (ROM) techniques to determine the critical speeds, identify the stability and reduce the computational time. Due to the spin-speed-dependent matrices (e.g., centrifugal stiffening matrix), several model order reduction (MOR) techniques may be considered, such as the modal superposition (MS) method and the Krylov subspace-based MOR techniques (e.g., Ritz vector (RV), quasi-static Ritz vector (QSRV), multifrequency quasi-static Ritz vector (MQSRV), multifrequency/ multi-spin-speed quasi-static Ritz vector (MMQSRV) and the combined Ritz vector & modal superposition (RV+MS) methods). The proposed MMQSRV method in this study is extended from the MQSRV method by incorporating the rotational-speed-dependent stiffness matrices into the Krylov subspace during the MOR process. Thus, the objective of this note is to respond to the question of whether to use the MS method or the Krylov subspace-based MOR technique in establishing the Campbell diagram of the shaft-disc-blade assembly systems in three-dimensional (3D) finite element analysis (FEA). The Campbell diagrams produced by the FOM and various MOR methods are presented and discussed thoroughly by computing the norm of relative errors (ER). It is found that the RV and the MS methods are dominant at low and high rotating speeds, respectively. More precisely, as the spinning velocity becomes large, the calculated ER produced by the RV method is significantly increased; in contrast, the ER produced by the MS method is smaller and more consistent. From a computational point of view, the MORs have substantially reduced the time computing considerably compared to the FOM. Additionally, the verification of the 3D FE rotordynamic model is also provided and found to be in close agreement with the existing solutions.

• 항공우주시스템공학회지
• /
• 제18권2호
• /
• pp.71-78
• /
• 2024

초기 열설계 과정의 경우 복잡한 궤도 열 환경 조건에서 다양한 설계 변수에 따른 열적 영향성 판단을 해야 하므로, 열 설계/분석에 많은 시간이 소요된다. 따라서, 초기 설계 단계에서 시간을 효율적으로 단축시키기 위해서는 최적의 설계 변수 도출과 이에 따른 온도 예측이 신속히 이루어져야 한다. 상기 문제점에 기인하여 차수축소모델을 활용한 최적 설계 전문 소프트웨어인 Veritrek이 2018년에 출시되었다. 본 논문에서는 Veritrek 소프트웨어를 활용하여 그라파이트시트 기반 냉각기 열 제어 시스템에 대해 차수축소모델 구축과 민감도 분석, 최적 설계 분석을 수행하여 냉각기의 허용온도를 만족할 수 있는 그라파이트시트의 적층 수, 방열판 면적 및 두께에 대한 최적설계 수치를 도출하였다.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.59-66
• /
• 2017

The guideline of selecting the number of snapshot dataset, $N_s$ in proper orthogonal decomposition(POD) was presented via the analysis of Eigen values based on the singular value decomposition(SVD). In POD, snapshot datasets from the solutions of Euler or Navier-Stokes equations are utilized to SVD and a reduced order model(ROM) is constructed as the combination of Eigen vectors. The ROM is subsequently applied to reconstruct the flowfield data with new set of flow conditions, thereby enhancing the computational efficiency. The overall computational efficiency and accuracy of POD is dependent on the number of snapshot dataset; however, there is no reliable guideline of determining $N_s$. In order to resolve this problem, the order of maximum to minimum Eigen value ratio, O(R) from SVD was analyzed and presented for the decision of $N_s$; in case of steady flow, $N_s$ should be determined to make O(R) be $10^9$. For unsteady flow, $N_s$ should be increased to make O(R) be $10^{11\sim12}$. This strategy of selecting the snapshot dataset was applied to two dimensional NACA0012 airfoil and vortex flow problems including steady and unsteady cases and the numerical accuracies according to $N_s$ and O(R) were discussed.